Vessel Ratcheting Ball Grip Screwdriver

Vessel Ratcheting Ball Grip Screwdriver - 2200MBH120

Рет қаралды 10,309

Project Pine Hills

Күн бұрын

Пікірлер: 45

@DenyTheZeitgeist 11 ай бұрын

I have a Tool Check so I jumped in this right away. Perfect ratcheting companion for installs!

@projectpinehills 11 ай бұрын

Good deal, that is a good pairing. Thanks for watching! 👍

@woodsinthewoods5337 10 ай бұрын

I recently got a couple vessel insulated screwdrivers for use in an industrial electrician setting and love the ball grip (yeah yeah funny funny) they are great

@projectpinehills 10 ай бұрын

Good deal. They are becoming very popular. Thanks for sharing and watching! 👍

@iangregoryhome Жыл бұрын

I now have several, love them especially the fixed blade(non ratcheting) ones.

@projectpinehills Жыл бұрын

Good deal. Yeah I’m thinking fixed blade is a good way to go. Thanks for commenting! 👍

@RomboutVersluijs Жыл бұрын

That a pretty clever design mechanism!

@projectpinehills Жыл бұрын

Thanks for watching! 👍

@johnpelkey1375 8 ай бұрын

Good review, I have a Phillips version and I like using it a lot for many of the same things you said, but I do agree you can hit the reversing switch easily. I do really love that It’s a ratcheting stubby as well.

@projectpinehills 8 ай бұрын

Thanks for the feedback. The stubby feature is one of the best things about it. Thanks for watching!

@gilldoyle2720 7 ай бұрын

Just purchased one of these and used it for the first time today. To my surprise, I accidentally flicked off the ratchet as I was driving a screw. Being aware of that potential problem, I didn't think it would happen to me. We'll have to see how often this occurs. I was driving a screw at shoulder height. That might have had something to do with the problem.

@projectpinehills 7 ай бұрын

Check out the video I did recently on the Anex ball grip. I think you’ll like it. Thanks for watching!

@michael.knight 7 ай бұрын

I feel how much back drag matters depends on the size of screws / bolts you're working with. If you're working mostly on tiny electronics, get the least back drag as possible. If you're working with thicker wood screws, back drag doesn't really matter that much.

@projectpinehills 7 ай бұрын

That’s exactly right. Good point. Thanks for watching!

@egbluesuede1220 9 ай бұрын

I just got the similar vessel ratcheting driver with hidden stubby, but was disappointed that it had a fixed #2 phillips rather than the bit holder like this one. I was really focused on the stubby part, so my bad. I want to send it back and get this one. Similar experience as you. I don't really have much in the way of ratcheting drivers, and was very curious to try the ball grip that everyone seems to love. I've only played with the one I have a little and it's ok I guess. I would like to use it more to see if I like it or not.

@projectpinehills 9 ай бұрын

Yeah I almost did the same as you when I was looking. Thanks for sharing and thanks for watching! 👍

@RomboutVersluijs Жыл бұрын

Im no sure if reversing it would fix that. I mean that mean you can slip when you ratchet in the opposite direction. Plus that would be contra of all the other tools out there. I mean all tools hove drive in = turn right and drive out = turn left

@projectpinehills Жыл бұрын

It would be different than other tools but given the location of the ring, it would prevent turning it by mistake as you torque. 👍

@gilldoyle2720 8 ай бұрын

The new Wera 838 RAS (with a very small handle) features a ratchet selector that turns in the intuitively "correct" direction (right to drive and left to loosen). However, an Amazon reviewer from Germany notes that the selector on that screwdriver operates so smoothly that it's still easily knocked into lock position, he says.

@projectpinehills 8 ай бұрын

That Wera is a nice driver. The selector is in a place where you can stay clear of it while using it. I’ll have to check it out.

@jessicalawson1417 6 ай бұрын

I wonder if it would feel worse with the back drag improved. Since it is designed for you to have your fingertips on the lower portion of the driver back drag might make it too stiff to move with your fingers.

@projectpinehills 6 ай бұрын

Well that’s what I mean, lower the back drag and it will be easier to use the screwdriver. Thanks for watching!

@naezro Жыл бұрын

I feel like the back drag matters a lot less when you can easily twist the ratchet with your fingers.

@projectpinehills Жыл бұрын

Yes, my biggest take away was the yellow rings direction. Thanks for commenting! 👍

@cpzmelbs 10 ай бұрын

My thoughts too

@mcj5644 Жыл бұрын

Nice video, man. I have a couple of Vessel’s impact screwdrivers with the ball grip. They’ve definitely got a different feel compared to most other screwdrivers, but I kind of like their ball grip design, especially when I have to really bear down on a fastener. 👍

@projectpinehills Жыл бұрын

Yeah great torque. Not so sure about this screwdrivers adjustable ratchet ring being so easy to reverse when using it. I might need to try some other Vessels. Thanks for commenting! 👍

@schbiker24 11 ай бұрын

@project pine hills Just wanted to say I enjoy your videos Do you still like using this Vessel screwdriver? (Thinking about getting it for my birthday soon)

@projectpinehills 11 ай бұрын

I like it except for the location of the yellow ring. I find that I turn it a lot unintentionally. Thanks for the feedback and thanks for watching. Have you subscribed?

@maurice3935 9 ай бұрын

I could find no way to prevent turning the yellow ring while using. Pretty annoying. But it makes the best stubby you can find.

@projectpinehills 9 ай бұрын

Agreed. Other than that, it’s a great driver. Thanks for watching!

@Volfas 9 ай бұрын

Hey I have a question. Trying to figure out if mine is defective or if it's normal. When you turn the stubby slowly does it let go at some point? Like turns quicker, and then tightens up, and then loosen up, and then tightens up, and so on?

@projectpinehills 9 ай бұрын

Like it has more back drag at one point than it does at other times? If so, that's typical for that driver.

@Volfas 9 ай бұрын

@@projectpinehillsoh ok so yours is the same eh? Thank you!

@projectpinehills 9 ай бұрын

You can put a drill at high RPM in it and run it in the ratcheting mode to see if it improves.

@VinnyDeez- 10 ай бұрын

0:41 INSERT *POP* NOice meme

@projectpinehills 10 ай бұрын

Thanks for watching! 👍

@iwenive3390 Жыл бұрын

It will have less back drag after it gets used heavily

@projectpinehills Жыл бұрын

👍 Thanks for watching!

@iwenive3390 Жыл бұрын

@@projectpinehills just got mine delivered. Thank you, I probably would have never purchased this gem if not for your video I stumbled upon. What a superb tool!!! Keep up the great content

@projectpinehills Жыл бұрын

@@iwenive3390 Thank you for your feedback. I hope you subscribed to the channel. 👍