Veto Pro Pac Tech XL HVAC Tool Load Out - HVAC Tool Bag

My 2020 Load out for my Veto Pro Pac Tech XL. This bag used to be my HVAC service tool bag, but i quickly came to realize that it was too large, and allowed me to put far too many unnecessary tools inside, resulting in an extremely heavy tool bag.
I have since switched to the VETO MC as my every day service tool bag, and now utilize this tool bag as my repair, install, and startup bag. Let me know what you think of the load out. Happy HVACing. #HVACLIFE
Subscribe and Comment for your chance to win HVAC Tools and related gear in upcoming videos.
If you would like to see something particular, drop a comment, send a message on my website www.hvactoolreview.com, or reach out to me on instagram at / hvactoolreview
If you are into Cars and Trucks
My other KZbin channel / @modifieddrive8768
Check Out KC Tool for a great selection of German Hand Tools
www.kctoolco.c...
Thanks for checking out the channel! List of tools from the video listed below on amazon.
Veto Tech XL amzn.to/39A7sup
Husky / Gear Wrench set amzn.to/2PZ1uLG
Unit Bit Kit amzn.to/39vGtQy
Milwaukee Driver Kit amzn.to/2IBnSXj
Rigid TXV Wrench amzn.to/2TwIarn
Solenoid Magnet amzn.to/2wFctmK
Milwaukee Demo Screw Drivers amzn.to/2PUzhpm
Klein Nut Driver amzn.to/2TNFpkz
Klein Crimper amzn.to/3cMUStV
Klein Needle Nose amzn.to/2TSkUmR
Klein Allen Set amzn.to/2TQznPY
Milwaukee Quick Lock Extension amzn.to/2VTIaDk
White Electrical Tape amzn.to/2v3ATG3
Mechanix Leather Gloves amzn.to/38sSwgg
Test Smart Probe amzn.to/2PZkh9Q
Yellow Jacket 90 degree Low Loss amzn.to/32ZMthY
Milwaukee 12v Light amzn.to/3cJhIT9
Milwaukee 12v Fuel Drill amzn.to/2Q0jx4d
Touch ThermalCouple amzn.to/2PY458N
Pipe Clamps amzn.to/38vFFKl
Fluke 52-2 amzn.to/2wIA6ux
Fluke 116 amzn.to/3aECsJG
extech psychrometer amzn.to/2VRqJDA
Punch and Chisel Set amzn.to/39ACFxy
Gear Wrench Set amzn.to/38z1fgP

[@HVACToolReview]

Going to be announcing the Winner for this Sunday March 15th. If you would like to purchase any of the tools in the video, they are all linked in the description. Thanks for Checking out the video!

[@David.rivas.alexis]

It’s always nice to stay informed and see how veteran techs load out their bags and see their specialty tools that get them out of a pinch 👍🏻

[@HVACToolReview]

I always enjoy seeing how others organize their gear and which tools are seen as must haves.

[@9-5channel]

If it wasn’t for channels like this we would have go through many bags like you did to figure out what a quality tool bag is. Luckily we have guys like you who look out for us tradies and guide us to become better technicians

[@HVACToolReview]

Thanks man! Best of luck winning the bag, and thank you for the support!

[@tylerwilliams7446]

Thanks for the opportunity brother, love your videos and would love to win the bag!

[@HVACToolReview]

Glad to hear it! Best of luck!

[@JERKER1245]

As a new Service Technician Apprentice entering this trade I love to watch your videos. It has helped me in learning about some of the tools of trade and has actually helped me in purchasing some tools for the trade with the info you provide. Keep sending videos I love to watch and learn!

[@HVACToolReview]

Thanks for the support man! I really appreciate that!

[@hunterhoonsan3407]

The quality on your videos is outstanding. Keep up the good work!!

[@HVACToolReview]

Thanks a ton! Thanks for watching!

[@vaughngarten1826]

Glad I found the channel and very cool setup! That Veto bag looks awesome

[@HVACToolReview]

Thanks, glad you found it too! Best of luck!

[@robertrappold3713]

With 18 years in the trade, some times it’s easy lose that motivation to stay on the bleeding edge of this trade. Your videos help keep me excited to jump in my service truck each morning. I have always wanted to try out a Veto, but, I’m not so sure I would cough up the money for one.

[@HVACToolReview]

I really appreciate that! Thanks for the support, and good luck winning this one, but if you do, you’ll probably end up wanting to buy another! 😂

[@chrisgormley5751]

Sweet set up. I work for a hvac company in Jersey that does residential, some commercial work. We do a lot of oil burners. I have been looking for a bag to consolidate my ac, oil and gas tools. My truck is loaded down with stuff pertaining to the industry so consolidation is prime real estate. Lol.

[@HVACToolReview]

Haha yea exactly. For awhile there I was trying to keep everything on the hard case it came in, but it’s really just not practical. Like you said, space is limited! Thanks for checking out the video!

[@robertw1871]

Looks like the ultimate bag, ordered one, can’t wait to get it... I’m hoping the ridiculously time consuming search is over...

[@ReadyforHiscoming]

Awesome content and detail !! Thanks for including a giveaway to induce greater views..... you’re awesome man! Good luck to everyone

[@HVACToolReview]

I appreciate that! Good luck on winning the bag!

[@SlimeBoutique-w8m]

Very nice! Thank you for the chance to win and all the videos you have uploaded!

[@HVACToolReview]

Thanks for the support! Good luck!

[@lnick4]

Started riding solo in the trade 8 months ago, whole different ball game. Love the new challenges and would love the chance to win such a nice bag. Keep up the good work, nice quality videos

[@deafhvacrsocal5292]

Nice giveaway sir ! Thanks for showing us of your loaded XL. I was thinking about get XL for little heavy tools and still use my daily Tech OT. Thanks for sharing sir 👍

[@HVACToolReview]

Solid plan there! Thanks for watching!

[@nathansmith3492]

I’m just getting into the trade at 17 I’m in a trade school still. I just started watching your videos they really helped me out in creating a valid list of tools to buy.

[@HVACToolReview]

Glad to hear that, thank you for your support!

[@tanbui3437]

i did watch from your first video and still keep watching. I like the way you make video, way you choose how to set camera and have to say it really professional, honestly. Hope your channel will get some more subcribers this year and have more great video to share with ú too.

[@HVACToolReview]

Thank you for the support that means a lot!

[@nando5302]

Just came up on your channel. Really nice set up, looking forward to more videos. Great content

[@HVACToolReview]

Thank you! I appreciate your continued support

[@Swan_Song97]

I'm relatively new into the trade so I love watching videos and reading stuff about anything relating to the trade! keep up the good work!

[@HVACToolReview]

That’ll take you far in this trade. Always strive to learn! Good luck in the contest!

[@TrippsMedia]

My co worker has one of those... there really tough. Good video btw. Watched the whole thing!!!

[@HVACToolReview]

Scott Flanagan thanks man! Great Bags! Good luck to you!

[@tuffguya2479]

Great bag setup can’t go wrong with anything Beto your channel is awesome and I will keep up the support

[@HVACToolReview]

Means a lot! Appreciate the support. Best of luck winning this veto!

[@Warmaster47999]

Just wanted to say thanks for uploading vids. As a new service tech in HAVC i find these vids helpful. Keep up the good work.

[@HVACToolReview]

Thanks! Glad you get something from them. Good luck winning the bag!

[@bigrigotj]

Thanks for giving back!

[@HVACToolReview]

Thanks for the support!

[@richardyamamoto47]

Contemplating a career change so trying to learn about the HVAC industry. Nice vid!

[@HVACToolReview]

Right on! If you don’t mind me asking, Which industry you thinking about transferring from? HVAC is a pretty limitless career field. Such a variety in the field, through management, and sales. Hard to go wrong.

[@blazeeisner9620]

Great video. Just retired last year but I still have all of my Veto bags except for my MB2 which I misplaced somewhere. The Tech XL was my first bag as well but finally got to heavy and became my repair bag as well. Thank you for inspiring some hopefully new mechanics 🧰. More are needed in our trade as us “Baby boomers “ are retiring. Have a great Thursday evening! God bless!

[@garydudgeon]

I would love to have the Veto MC bag. Thank you for contest and videos.

[@HVACToolReview]

Thanks! And Good luck to you! 👍

[@hozerhvac4406]

Nice setup. That was the first bag I ever got. It eventually destroyed my back because I filled it too much. I have now made it a install bag. Great tool set up.

[@HVACToolReview]

Haha sounds pretty identical to my story as well 😂

[@tonymorales7286]

Nice bit of kit!

[@engineer1793]

I use that same bag for my big repairs and starts up too. I use my MB3 for my maintenances

[@HVACToolReview]

Right on! I think it’s a pretty good system

[@kingandrewton]

Great video! It’s incredible just how many tools can fit in the XL. I’ve been bouncing back and forth between the MC and the Tech-LC, so this giveaway would be amazing to win! Thanks for the opportunity

[@HVACToolReview]

Haha yea it sure does, and it weighs a ton 😂. Both are great choices! Good luck to you!

[@austinw6579]

Just getting started in HVAC trade, your videos have helped me a ton! Keep up the good work, Can’t wait to see more!

[@HVACToolReview]

Thanks buddy! Appreciate the kind words!

[@adamwalker8731]

Been my go to bag the last 4 or 6 years

[@HVACToolReview]

It’s a great bag, hard to beat

[@nickschatzley1400]

Nice little bag, be a nice addition

[@HVACToolReview]

For sure! Best of luck

[@86Sando]

The veto bags are the best around. Nothing but quality. Just subbed to your channel.

[@richardakers6301]

Nice set up almost looks like my bag

[@TheCubanhaze007]

Going to school now for HVAC and love LOVE learning about this field! Added your instagram and havent looked back since! Great page and now great videos!

[@HVACToolReview]

Thank you my friend! Appreciate all the support

[@BBYERS27]

I just recently ran across your channel, and I am really enjoying your content. I am guilty as well of overloading my bag if there is extra room. I am currently running tech pac as a repair/startup bag, and the mb2 as my service bag. Keep up the good work.

[@HVACToolReview]

Sounds like a great setup. Thanks for the support!

[@_trllblnts_5363]

Great video!! Thanks for the chance!!

[@HVACToolReview]

Thanks for the support! Good luck

[@leom121]

Gotta love Veto, great bags! Hopefully I can win another one!!

[@HVACToolReview]

They are awesome! Wishing Ya luck!

[@chris12707]

As a service tech apprentice I love watching videos just about everything, van setups tool bag setups diagnostics and just anything that's cool. Would love to win this bag

[@HVACToolReview]

Appreciate your support! I love the MC bag, best of luck winning it!

[@OfficiallyTweakd]

Thank you for your content. These bags are incredible looking. I’ll be able to afford one to try out eventually. Thank you so much again. ❤️

[@HVACToolReview]

Maybe you will win this one, good luck!

[@superiorcomfortheatingairl3373]

When I first started doing HVAC 32 years ago I had a metal tool box full of wrenches, screwdrivers and bunch of hand tools, the test instruments were only manifold gauges, pocket dial thermometer and a Amprobe dial meter. Now I only carry a small portion of hand tools but a large amount of electronic test instrument tools. How thing have changed

[@HVACToolReview]

Pretty fast evolving trade that’s for sure!

[@nluna702]

Love to quality of your videos currently have tech xl and TP3b mc would be a great bag to bridge the gap between the two

[@HVACToolReview]

It would be a great fit, thanks for checking out the video.

[@BlueCollarBiceps]

Awesome load out man!! Love that set up. Keep up the great videos.

[@miltonalbrecht7524]

I love watching these types of videos. Looking to get into HVAC after I separate from the Navy in 18 months. Hoping to get into that UA VIP HVACR program!

[@HVACToolReview]

Pretty solid plan there! I actually went through the VIP program as well to get into my local.

[@lalosamano]

Thanks for your videos man! I’ve learned so much!!

[@HVACToolReview]

Awesome! Glad to hear that it’s valuable

[@Blinx559]

Great videos I highly appreciate you taking the time to make them. Keep em coming 👍🏽

[@HVACToolReview]

Thank you! Appreciate the support!

[@luisbriones1998]

Just started out in this trade, HOPEFULLY IM THAT LUCKY WINNER🛠 🔥🔥

[@HVACToolReview]

Right on good choice! Pretty good odds winning so far. I Will be doing a lot more giveaways on the channel in upcoming videos. Stay tuned!

[@bloodyshothvac226]

I’ve always wanted veto they are Awsome

[@HVACToolReview]

You should get one if you get the chance!

[@justinguzman13]

love the videos been subscribed ever since you first started youtube!

[@HVACToolReview]

Thanks man! I really appreciate that! Good luck to you winning this bag!

[@EyesofIllusion]

I have been watching your video and it has help me on the field. That bag is perfect for pm/service. Hope I win.

[@HVACToolReview]

Yea it’s been really great, the perfect size and capacity. Good luck!

[@austinbell536]

Hey man, I love the videos. Currently I'm a college student at WSU Tech I am working towards my associates degree in HVACR. Winning this bag would really do alot for me and help me get started so I am prepared with my own tools when I start applying for jobs. I love watching your KZbin channel grow man best of luck to you!

[@HVACToolReview]

Thanks for the support my man. Best of luck to you on winning this bag!

[@2princessA]

I had a nice bag xxl model the only problem they had is the zippers!

[@matthewshaw1941]

try to get started in the trade this would be a very nice start.

[@HVACToolReview]

Best of luck to you!

[@christopherguerrero1017]

Great video thanks for the information on the pack. What extra jumpers do you keep in your bag? I liked the rigid wrench i know ill pick one up soon. Thanks for the chance to win and hope your channel continues to grow.

[@HVACToolReview]

Thanks man! Appreciate the support. The rigid wrench is great. I keep a few cheap alligator clip jumpers that you get from the parts house, a couple magnetic jumpers by supco, and a couple larger alligator clip jumpers that I’ve had forever and somehow managed not to loose. 👍

[@dennisnoone7427]

I ll be happy to win this one, Thanks

[@paultheriot7082]

Sweet bag

[@zacdavies9855]

What a bag! Loving that load out also, going into the second year of my apprenticeship would probably eat shit for one of those bags right now 🤣

[@HVACToolReview]

Haha well at least wait until the contest is over before you do that, you could win this one 😂

[@michaeljordan1651]

Love the channel been in the trade for a little over 10 years and veto has been with me for the last 8 using the mb2 as my main service bag a little over packed but it's been holding up the mc would be a nice little step up from that keep up the channel enjoy the content

[@HVACToolReview]

I think it would work well for you. Best of luck!

[@dosterkyle]

Keep up the good work man. Great information for guys in the trade! I'm in the commercial field and have a new apprentice and would love to win this bag so I can take and make him a good starter loadout with some of my duplicate tools, gotta keep the trade alive! Thanks for the great informative videos!

[@HVACToolReview]

It’s a great trade to be in, such variety and versatility. Thanks for the support, and good luck in the giveaway!

[@robertwalsh7494]

Yeah buddy.

[@JLaluLemon]

Great video would love this bag

[@HVACToolReview]

Thanks buddy! Good luck in the giveaway

[@canucksofvancouver]

Would love to win this bag. Looking forward to seeing more vids from your channel

[@oriansinkleryukon2680]

Love these bags

[@HVACToolReview]

They’ve been great.

[@blakefryer9380]

Have a old Klein backpack now. Been looking for something else. The MC is looking like my choice

[@HVACToolReview]

It’s hard to beat really! I have zero complaints with the MC. I ran a Klein backpack years back and I just never really liked it.

[@blakefryer9380]

I liked it at first but now it’s just not practical

[@HVACToolReview]

Blake Fryer I agree, hard to keep organized, pockets just aren’t the right size. If you had only a bunch of pliers, screw drivers and nutdrivers, might work

[@WinWinLose]

Sick bag!!

[@jeremiahhesse3102]

That’s awesome

[@RJL0118]

That would be a perfect fit for my insulated tool set with 1000v gloves.

[@HVACToolReview]

Sure would. Good luck! I sure do hate those arc flash gloves! 😂

[@JoeB3]

New sub, looking forward to more great content from you.

[@HVACToolReview]

Thanks you!

[@spamh3591]

How could anyone dislike this video...?

[@HVACToolReview]

🤷‍♂️ probably plumbers or electricians 😂 jk

[@chrisdennis3564]

Nice setup

[@HVACToolReview]

Thanks man!

[@nicholasowings3167]

Like the setup, would like to check out a Veto!

[@HVACToolReview]

Thanks! They are great. Good luck winning this one

[@AngelCastro-sm3og]

Awesome videos! Thank you for taking out of your time making them. I would love to own a veto bag. Keep up the good work 💪🏼 I hope luck accompanies me.

[@HVACToolReview]

Thanks for watching! Good luck!

[@ascotttransport1275]

I will do anything for a veto bag!!

[@dickiedubs3137]

Great bags, my Stanley is awful. Tools all end up mixed up at the bottom of the bag. I do think though that bag is too big....10kg is the limit for me.

[@hvacplayer3238]

Hey man love the videos keep them coming!

[@HVACToolReview]

Thanks man!

[@tywitt2979]

Great video

[@koryloftus165]

Great videos

[@stephenzangardi1347]

Sweet videos can you review the tests prob kit, thanks for doing the give away!

[@HVACToolReview]

Definitely. Working on getting a second of the field piece probes too so that I can compare them

[@emmanuellsanchez598]

Love the videos ! New subscriber 👍

[@ShavkaTchiK]

Man I’m the same with when it comes to space and having heavy tool bag. Can’t seem to have a good set up I don’t know why.. still working on it tho. I have one veto bag for install but I think I should separate mine just like you did. Install and service on different bags.

[@HVACToolReview]

Works well for me, I think you would like the setup!

[@felixhernandez1913]

Thats Amazing.

[@HVACToolReview]

Good luck to you!

[@josearias461]

Let me get that!!

[@808bill]

Yessah

[@rickyp11]

Great content and 😍😍😍😍that veto!

[@HVACToolReview]

I appreciate that! Good luck to you

[@forrestking6350]

Great channel!

[@HVACToolReview]

Thank you!

[@anthonys6187]

Awesome! I’m debating between the tech XL or should I get a pro Pac backpack… I have an OT-LC and I’m tired of stuff falling out. I need a closed bag… any tips? I do lots of rough in’s and changeouts.

[@matthewclemons1574]

Pretty much everything you need in that bag. Curious if you ever tried the Klein bags?

[@HVACToolReview]

I have, just the Klein backpack tho. Still have it, not bad if you like the backpack style. I just don’t really care for the layout or the pocket sizes. Lots of little pockets for screwdrivers and nut drivers. I guess it must work for electricians since that seems to be all they really carry 😂.

[@matthewclemons1574]

HVAC Tool Review I have the tradesman pro tool master backpack. I’m considering getting a tool pouch as a trouble shooting bag, the bags can get super heavy very fast.

[@HVACToolReview]

For sure! That’s exactly what happened to me which is why I picked up the Veto MC which is now my service bag. Much lighter and has all the necessities.

[@frs2768]

Does anyone know if a Milwaukee slim organizer packout fits in there?

[@donaldchosa3699]

Noice