Vevor Digital Ultrasonic Cleaner // Review and Testing

LINKS:
Using my ultrasonic cleaner to remove rust: • Easy RUST REMOVAL usin...
10L Ultrasonic Cleaner s.vevor.com/bfQBHm
30L Ultrasonic Cleaner s.vevor.com/bfQEvr
Discount Code VVSALE5 for 5% off
RUST REMOVAL SOLUTIONS HERE: • Easy RUST REMOVAL usin...
Vevor PORTABLE BANDSAW: • Vevor PORTABLE BANDSAW...
Vevor Digital Ultrasonic Cleaner: • Vevor Digital Ultrason...
Vevor 450 Airless Sprayer: • Vevor 450 Airless Spra...
Vevor Garden Cart: • VEVOR GARDEN CART // T...
Vevor Drywall Sander: • DRYWALL SANDER with bu...
Vevor Demolition Jackhammer: • I bought the cheapest ...
Vevor Heat Press: • Vevor Heat Press Machi...
SUPPORT:
If you want to support my work - I am very grateful. Here's the link...
ko-fi.com/jelbuilder
#vevor #ultrasoniccleaner #toolreviews

[@jelreviews]

Rust Removal Solutions using this cleaner here: kzbin.info/www/bejne/ep2qcmysZrGCsLc

[@scottwilson8157]

FYI Put your parts and cleaning solution in a plastic zip bag. Put the bag in the reservoir. Add water to reservoir to full mark. Never have to clean reservoir. Save the seals from leaks at the spigot.

[@snowleopard9749]

These can be used to remove rust, just put your tools/fixings in a plastic zip bag with dilute oxalic or citric acid. In Australia Oxalic acid is sold as Diggers "rust and stain cleaner".

[@jelreviews]

Great.... I'll test that out for an upcoming video. Cheers 👍👍

[@Iseekoutthetruth]

Cool Little New Toy.

[@NickBowden87]

Hose might be for gravity siphon if the drain hole gets clogged and you don't want to lift machine to empty it etc. but Vevor is good enough, I bought a jack hammer and a Jack from them, both great, will probs try use your coupon if it still works lol

[@jamesharless5357]

Great video!👍🏻

[@robav8or]

Try using an acid bath to remove rust in the sonic cleaner. Also; I will be using my VEVOR to sous vide a steak. Guga did this to successfully tenderize steak.

[@_Michael_01]

Do you hv the link to the video? XD

[@_Michael_01]

Ah no worries just came across this video from TKOR testing the same thing and they did mention Guga from Sous Vide Everything👍 kzbin.info/www/bejne/gIrTnmeVi7Z8nM0si=Sizo33_wNPtJ78JZ

[@robav8or]

@@_Michael_01 I can’t find it. It’s possible I may be confusing Guga’s channel with another. I watch so many!

[@robav8or]

So I bought two Costco (Prime) Ribeyes and Sous Vide one in a standard setup and Sous Vide the other in my VEVOR Ultra Sonic cleaner. Both were heated to 122°F (50°C) for two hours. It should be noted that the ultrasonic cleaner times out after 30 minutes and must be restarted. The difference between the two steaks was absolutely noticeable! My son & GF confirmed in a blind test the steak cooked in the ultrasonic cleaner was noticeably more tender. That’s not to say the other steak was not as good. It was delicious and tender because of its cut.

[@t-rocks1960]

We had one of these in the airforce that was big enough to take a holden 6 cyl engine, we used to fill it with freon, If you ever wondered why Amberley was soo hot, no ozone...😂 T-rocks

[@jelreviews]

That answers my question about Amberley! 😂

[@luisamedina1]

Is there a way to set up the temperature on these to a certain degree, (let's say 35C), where the machine does "not" pass that particular temp? I have the same model, the little blue light will go off, but the "actual temperature" keeps on rising. Thanks a lot for posting this vid

[@jelreviews]

Well, on this machine whatever temp I set it to, that's all it rises up to. Not sure why yours would continue to go above your set temp. Possibly the thermostat had gone faulty?

[@PappysCycles]

CRC Evapo-Rust, Heavy-Duty Rust Remover, Reusable, Acid-Free, Non-Corrosive, Water-based, 32 oz, Removes Rust to Bare Metal Amazon for rust removal

[@jelreviews]

Thanks for the tip!

[@lewisivanaclan3589]

You should try ultrasonic cleaner solution. For rust cleaner

[@jelreviews]

I've just put up a video testing three different rust removal solutions using the ultrasonic.

[@PappysCycles]

NORTHWEST ENTERPRISES Ultrasonic Cleaner Solution

[@r.t.h.-R1ghtTh3Han9]

Dont use it on jewelry with stones...the vibrations can dislodge them

[@lidiasantos8412]

Is it normal to produce stricking noise? I Just bought the 3l vevor ultrasonic cleaner and it noisy loud sound

[@jelreviews]

Yes, ultrasonic cleaners are loud machines when they clean.

[@sanawarsi93]

My machine is heating but when I am trying to push the ON button..it vibrates for 2 - 3 seconds and than turn off. What should i do? Thank you in advance

[@jelreviews]

Sorry, I can't help you with that. Try reaching out to VEVOR for a response to the problem. Sounds like a problematic timer to me though.

[@N3RFTHIS]

Ifnyou used the correct fluid it actually does a decent job of penetrating and removing rust.

[@jelreviews]

What would you recommend a good rust removal fluid is? I'd be happy to do a video test.

[@commenter5469]

You either have giant hands - or I fail to see how you can fit 10 liters in that tank.