VFC HK416 GBB V3 - 3rd Time Lucky?

[@infamousjack1256]

I'm glad you finally got one that works normally, the relief 😂

[@BadaBingPictures]

Thanks, Jack! I’m almost in disbelief as I fully expected some problems. VFC has given me severe trust issues. That’s why I played it safe with the ‘D’ model.

[@mrsherman5012]

@@BadaBingPictures I never had a problem with vfc the only time i did was with there m18 and vp9 handguns. i belive my 416a5 was a eu model and worked fine even tho the mag was the first thing to die on it

[@jackanderson3940]

Everything makes so much more sense now. Pretty much every Vfc gbbr owner in the states has Asia editions due to the government banning the retailers from importing them. So that now explains why all of mine work and everyone else that I know who owns VFCs work. I was thinking this is the most unlucky person of all time with VFC.

[@littlehuub]

Congrats Bada, after all this time and frustration you deserved a good working VFC 416! Your face on the 30rd shot says it all, enjoy it!

[@BadaBingPictures]

Thanks mate. It’s about time I got a good one!

[@HughJC]

My V3 416D works also, Asia edition, I took the dust cover spring off my 416A5, as I thought it was catching on the ambi bolt release, no issues with bolt lock on the A5 since (euro edition).

[@jeffreybrown]

Congrats! Any chance we will see a side-by-side comparison with VFC, VT, and TM? :)

[@BadaBingPictures]

Thanks!! The plan was as such, yes. Mainly to update my old content and now those chapter 2 videos can be made. Over the next year I’ll look at doing this.

[@jeffreybrown]

@@BadaBingPictures Awesome, looking forward to it! I watched your TM vs GHK back when I lived in Canada and went with GHK. Then, I moved to Italy, watched it again and went with TM ( We have a sub 1 Joule limit and I wasn't going to gamble with GHK's QC). Now I have a few TM's and while performance is great, I miss the heavier recoil, I am curious how the new VFC's fair, or if VT is the way.

[@kangazkorva5674]

Cheers, mate! Tip of the hat for you! 🎩👌

[@jakecolquhoun6427]

Thanks mate, always wanted this theory proven, this is what keeps me on the fence with vfc, thanks again for sharing ☺️

[@BadaBingPictures]

Be safe and order from Asia. And if they check your GBB before shipping, even better. Like mine

[@bull7618]

May I ask what Asian retailer(s) you’re using to import direct from Asia? Only extra issue I may have is clearing through Irish customs with the 1 joule limit. I believe NPAS fitted models have zero issue though, or maybe ordering an NPAS kit along with the gun 😂Apparently a roll of the dice if it isn’t NPAS. The prices are significantly lower (not including import duty) and as shown in video there does seem to be a difference between euro/Asia models. Great video

[@이누야샤-n3o]

Please upload a review video of WE HK416D GBBR

[@BadaBingPictures]

Sorry pal, I’m not interested in reviewing the WE 416. As I already own a VFC and Viper Tech 416, there isn’t really anything I could gain from the WE Tech version.

[@aussmith5335]

I had my fingers crossed it would work. So happy for you after all the past issues 👏👏👏👍

[@BadaBingPictures]

Thank you, my friend. Glad to have the support. Now it can put in the work for a review! 👍 Cheers

[@spungub]

Would you still recommend the TM MWS platform for a first time gbbr user? I love the look of that tan VFC 416 but everything I see online is pointing me towards the TM mk18.

[@BadaBingPictures]

Yes I would. It’s a good bridge if you’re coming from an aeg. In a sense where it has a fast effortless action and that’ll help give you confidence in the system. The two systems do what they do very well. TM is a highly upgradable performance package (not that it needs performance boosts). I mean I’m a sense where it’s pretty much amazing out of the box, with limitless customisation. Receiver kits, handguards etc… The VFC gives you the best real feel for the price. It covers the realism and can also deliver on the field too.

[@Dizzyfatpigeon]

I had a vfc 416a5 which I acquired based on your review years ago when you pit it against the MWS I really wanted to love it, the trigger alone made it worth it, but it was honestly the worst GBBR I have ever ever owned, I couldn't begin to list the amount of problems I had with it I hope this one works well for you!

[@BadaBingPictures]

The trigger is excellent on these. Sorry to hear you had issues with yours. These aren’t cheap either, so it’s totally disheartening when they’re lemons.

[@Sh1tshowdivision]

I had a double feed issue with mine, and the nozzle is bent but sit usable got on order with extra nozzles incase when I tace the bolt carrier apart and find more issues

[@ExiLeZH]

Feels like I time traveled, expected this video to go online in 2030, you know after another 6 years :D

[@BadaBingPictures]

😂 I’m early in that case! Haha. It’ll take another 6 years for their EU/U.K. specific to catch up

[@ExiLeZH]

@@BadaBingPictures The next “get a vfc (asian edition)” video will drop in 6 weeks? 😜

[@skibididopyes-i6k]

Could you make a full review and rail takedown of this rifle? I haven’t really seen any on KZbin and wondering if you could make one

[@BadaBingPictures]

I will endeavour to make one at some point. I have lots of other reviews currently being produced at the moment.

[@michaelangelolim3739]

I have vfc hk416a5v3 magazines will it work in the D versions?

[@MartinJHarris]

What about the DE Noveske... have you tried one..?

[@BadaBingPictures]

No I haven’t. I don’t like Noveske M4’s. Plus, doesn’t make much sense to buy the clone when I have the real TM.

[@simonkolarik6533]

I totaly agree badabing But i think that the problem may be with airsoft shops, they buy b-Stock and selling it to us at full price...

[@8man_01]

Yo Badabing! I saw on your FB page you shared about the upcoming VFC M16A2 using their V3 system. I'm guessing you're gonna review/try that too? With a direct from Asia unit, of course haha. I'm really itching to get a retro AR and having watched Black Hawk Down as well as having played a lot of the Delta Force Black Hawk Down game and other tactical shooters from that era, retro ARs just hit different compared to the kinds of builds I see nowadays. Building an MWS to become an M16A2 would destroy my already raggedy wallet haha.

[@BadaBingPictures]

Hi! Mate, I’m right there with you. Funny you say “retro AR”. I’m obvious unaware that’s it’s been been 20+ years since they were standard issue. It’s indeed a long time ago…but to me it doesn’t really feel like it. The M16A2. I love those rifles. The M16 variant of my youth. Totally iconic. DF BHD was outstanding! I loved using the one with the M203. Battlefield 2 was also peak carry handle squad too. And one of the last games before GWOT setups took hold. Am I going to buy one? I don’t know. I might not. I have so much on my plate right now. Unless it’s heavily requested by multiple people.

[@8man_01]

@@BadaBingPictures believe me it also hurt typing "retro AR" in my comment hah! no rush or pressure on getting one for review. Seeing your fb post and rewatching this vid made me curious. Cheers for the reply! Excited for your next video on that TM AKM Long travel kit.

[@carloslook9642]

Hi, I'm curious where did you get their needle into gas fuel to refill green gas magazine . I will be satisfied if you're given me a details 🤞👍

[@chiehhan610]

Badabing any chance you will get the new Guns Modify 416a5 based on mws system?

[@BadaBingPictures]

I have no plans to buy one as I already own the original TM M4. Unless it is heavily requested for the channel or this video receives something crazy like a couple of thousand likes, I’m in no rush to invest in one.

[@samuraijutsu8876]

I have an HK 416 D V3 Asian edition also. The only problem I ever had with it what is the screw that holds the bolt catch assembly together, I just put some loctite in there and never had a problem since

[@OllieTalksAirsoft]

The frustration is real. Ive been saying this all along about VFC and even spoken to UK distributors who insisted VFC Europe and Asia are now the same. Ive never been convinced and you've proved it. Top man, top content, GBBR HERO!!!!!! 🫡

[@BadaBingPictures]

I sat down and actually thought about the differences in the U.K. EU exports versus the ones I personally had imported from Asia. All of those local units were either: meh-needs work-utter rubbish. With the exception of that V2 SD3 which I sold, I still have all the ‘Asian Edition’ GBB’s and they work very well indeed. There HAS to be something in it…I can’t just be a tinfoil hat wearing nut job haha Great to see you in the comments section, Ollie. Hope you’re still enjoying that HK53? Cheers bro

[@n0madx85]

I'm glad you finally got a working one! I can confirm the A5 ver. 3 also works like a charm with the stock and grey mags. The gen. 2 V-Mags still give it issues though...

[@BadaBingPictures]

I know right?! Bought the Delta model to make sure it worked. Wasn’t going to risk another A5. What issues? Bolt lock or inconsistencies/huge output fluctuations?

[@n0madx85]

@@BadaBingPictures Apologies. Bolt lock issues. I just stick with the grey STANAGs and the A5 works like a dream. Probably my favorite "M4" platform for airsoft. I recommend to everyone.

[@Nyasiu]

Where did you buy it from? I'm curious

[@danielgarcia-fg3uf]

May i perhaps get a product link?

[@lazarus1415]

Where did you purchase the rifle from?

[@BadaBingPictures]

Action Airsoft Online

[@lazarus1415]

@@BadaBingPictures thank you.

[@jamesduncombe3340]

Where did you order it from, please , as i need a HK 416 D?

[@ZonShamirz-vj8xz]

Hey! I’ve been debating between getting VFC VR635 DX GBBR or Tokyo marui mp7. Which one should I get? What do you think?

[@BadaBingPictures]

Hi, I’m not familiar with the VR635 GBBR, so I don’t have anything to say of it. TM MP7 is excellent…although not without its flaws. And green gas isn’t the kindest fuel to use in it. Still, I have fond memories of using it in CQB and it was extremely precise when paired with good ammo and a well zeroed red dot sight. The VFC V2 makes for a more authentic replica though. It being 1.1 scale.

[@augustkrislotino1240]

What is the solution of double feeding vfc hk417 gbb?

[@prowoto]

for the leaky vmag you can likely just tighten the screws and the gaskets will seal themselves if not teardown is easy and some lube should fix it

[@BadaBingPictures]

That is exactly what it was. I fixed it after this video came out. 👍

[@prowoto]

@@BadaBingPictures great! the vfc mags are amazing ive never had issues with any of mine with the gaskets. btw Love the videos almost made me get a ghk ak haha

[@WolfMan-nf4lv]

About damn time VFC got you a working bolt catch🤣 well hats off to ya, the classic model of 416 is very nostalgic to see too, that was my go to in BF3

[@BadaBingPictures]

I know right? About time indeed! Funny you say that. I had a session on BF3 briefly yesterday with the M416. I am no good at this game anymore!

[@WolfMan-nf4lv]

@@BadaBingPictures Oh dude yeah neither am I, I suck at online games now 😭 I’ve been out of em for too long lol

[@Clockhead.Danteh]

When I first get my GBBR I aimed to the VFC's HK416D(because I happen to have one that's a Chinese Gel Blaster[no money for AEG back then]), I have to say the shooting feel is very impressive. And around some time, I also going to get myself an TM AKX, but I either gonna sold one or two GBBs from my collection. The ones in the line of gap is my VFC P320 M17(it was repainted due to the original color scratch off) and my HK416D, which kind of make me have to think thoroughly about it.

[@Deus1236]

Hell yeah! Finally. You deserved to get a good one after all this time. I always import from Asia myself :D

[@BadaBingPictures]

Cheers mate. Best part of it is that customs didn’t bother charging me import fees. So I got lucky twice!

[@leutnantkrafft73]

Sooooo.... Any chance of revisiting their HK417? it being gen2 and all.😅

[@BadaBingPictures]

No chance. I still have nightmares of that horrendous Version 1. As I understand it’s still not quite as perfected as it could be, so I’ll wait and see if a V3 comes along.

[@HUA-ns5wx]

Awesome video, thanks mate, gave me a chuckle

[@BadaBingPictures]

Thanks for watching bud

[@HUA-ns5wx]

@@BadaBingPictures I've just put a real AR 3 Oz buffer weight from brownalls in my vfc 416 and bcm, easily the best upgrade I've done for them, I'd highly recommend it, they both absolutely rip on full auto now, only £30 a pop too

[@matteo.grrrrrrr]

What is the difference between the European and Asian editions in terms of internal parts? why does the Asian edition work better?

[@jerichosa5733]

Funny how this video popped on my algorithm when I recently bought a Gen 3 VFC Hk416A5 lol

[@BadaBingPictures]

I swear, I had nothing to do with it. The internet is creeping after you again…

[@Ruben1994OL]

Does your V3 also have issues with closing the dust cover on a closed bolt and the selector being able to be put on safe while uncocked?

[@BadaBingPictures]

My dust cover closes properly. The selector is supposed to be like that. Unable to rotate onto safe with the hammer up. Real AR’s do this. The HK416A5 changed this, although airsoft ones don’t replicate that function.

[@Ruben1994OL]

@@BadaBingPictures Thanks for replying! My old beat up VFC HK416D replicates it correctly, and can not be put on safe when not cocked, but a friend of mine recently bought a new VFC HK416D V3 that does, so I was curious if it was a bug, or a feature on the V3🥴

[@gladiator3964]

no, there are no difference about EUA and ASIA 416 a5’s ambi bolt catch makes that error when we shoot this

Finally. Not a a5, but hey, a 416 at least ! Mine is a v3, and I never encounter any issue… yet. My mp7 vfc has the issue. I filed the bolt a little bit, but it’s not solving for a long time… it came back. I’m waiting for the cnc bolt from clutch precision. Hop it will fix the issue.

[@BadaBingPictures]

It’s worked out better. It’s a better candidate to compare with my Viper Tech 416D. So it’s all good. Yes. Hopefully CP release a new CNC bolt

[@alexizenflamm]

my client had the same issue. problem with bolt catch on vfc mp7. when i disassembled it, i've seen heavy wear on the bolt (alloy) where it should be catched with bolt catch (steel). i solved the problem soldering some steel piece to the alloy, using some heavy duty russian soldering flux "A64" and inert gas to prevent alloy oxydizing. to do this i removed some alloy material from the damaged part of the bolt, so my steel piece could fit. soldering to such a massive part required some very powerful soldering iron 100W+ and not so common tools and inert gas, but it's possible.

[@gangstersmonkey3234]

where to buy 🙏 URL pls

[@BadaBingPictures]

KZbin gets annoyed when links are concerned but try search Action Airsoft Online.

[@gangstersmonkey3234]

@@BadaBingPictures thx bro

[@wolftheweekendwarrior]

The 416D has a non-ambidextrous bolt catch, unlike the A5, which is lighter, so I think that's why it locks back, not because of regional differences.

[@BadaBingPictures]

Hence why I went with the Delta. Trust issues with the A5. Although there’s something to be said for the EU exports. I’ve never had a good one. Whereas the Asian ones I’ve imported have been fine.

[@ExiLeZH]

Had a good laugh at 4:44, I totally felt your stress relief lol! Honestly would've worried about your mental wellbeing if that was another melon 🤣

[@BadaBingPictures]

It’s nice to finally win one. If it went the other way…I would’ve turned out like Michael Douglas from Falling Down.

[@ExiLeZH]

@@BadaBingPictures 😂

[@spitcross]

What's the official difference between the Asian and non-asian edition?

[@BadaBingPictures]

The most noticeable differences are the full trademarks. Antler proof marks and serial numbers and it says made in Germany. EU has Licensed Trademark and not as many authentic markings.

[@woody7948]

I wish airsoft companies would stop making editions/versions/batch ABC, make a complete product instead.

[@BadaBingPictures]

I know mate. I think licensing has something to do with it. One of the reasons why Umarex has all of their markings plastered over EU/U.K. units. The Asian models are granted the full markings. Antler proof markings etc… I’m sure there’s more to it.

[@earthsteward76]

Absolutely.... especially when you're paying several hundred pounds for it

[@timmys8119]

Blame Umarex for all this bs. All retailers in Germany hate Umarex for their bad business practices and lack of support.

[@Gaijin36]

I think one of the lads on discord was pretty much saying this - I.e. that VFC cannot iteratively fix issues on the Europe Umarex lines due to the licensing. As they are only licensed for the initial products not for follow ups, even for reliability reasons. Madness.

[@MannyOsias]

I’m glad you finally got one that works! I have the opposite experience with your theory, though. I’m based in Asia and both HK416A5s (I haven’t tried other versions) I got were Asia versions. Both were epic lemons, with the bolt lock problem. Utterly disappointing. The first one I sold quickly. The second one, I got years later, I managed to tweak, and now has no issues. The older version mags do work for me, but I just prefer to use the newer version. I agree with you 100% that the products should work out of the box.

[@cx3264]

Have you considered to run an E&L type 191?

[@BadaBingPictures]

Nah. Not my kind of thing. It would’ve made it more attractive to me if it used an existing GBB AK Magazine. TM or even GHK.

[@Broeils]

So what is actually different then? Ive got a Euro v3 a5; no issues whatsoever after 2 years… I have multiple asian version bolts (setup for cqb, assault and dmr) but they are no different than what came stock. Would love to see a side by side teardown of the umarex and vfc asia edition

[@BadaBingPictures]

I have no idea what the differences are internally. Whether the wrong springs or parts get accidentally mixed in with the export versions…who knows. I’d like to see a comparison between them too.

[@neeeeeck9005]

Hello, I am just starting out. I have seen video reviews from years ago on comparisons between GHK and VFC M4s, for today, what would be the better choice in terms of realism, reliability and build quality?

[@BadaBingPictures]

Hi, I think much of the community would highly recommend going for a VFC AR. I think that would be a wise decision too. GHK AR’s, while operationally are a blast, they’re still a quirky system and abundant flaws remain. Not including poor QC. Realism is about the same. The VFC has a little more leeway with real steel compatibility, or so I hear.

[@チーズ-l2m]

Man felt like he won the game of life haha

[@20032012x1]

to be honest, even I have settled in UK, I am still order my airsoft gun from Hong Kong airsoft supplier, because the asia version always has full marking and better gas efficiency. Moreover, I knew the shop owner very well, he always provide me an useful opinion which gun should be bought and which is not worth.

[@20032012x1]

@@DaibhidhBhoAlba Thanks for your encouragement. However, I’ve consider to setup a airsoft business in Uk, the probelm cause the airsoft price not competitive that is the VAT. Further, Most of HK , Taiwan airsoft player trend to use GBB rifle instead of AEG, I think the market we target will not fit in UK because GBB rifle and the accessories is still costly, it is not friendly and affortable for all UK airsoft player.

[@martinallandiez2994]

From someone who lives in the Philippines, I feel bad for you. Thanks for the 6 year long "research".

[@deangoodall7411]

Hey Tug!! 🤣🤣🤣🤣 loving the vid mate, the editing, sound and the links to Mr Speedman!! Amazing! Great work Sir!!! You may be on to something with your VFC conspiracy theory. I ordered an SR16 gbbr, here in Spain, no special requests, it came with a restrictor, not an NPAS in the nozzle and only finally works after replacing most of the parts surrounding the bolt catch 🤷‍♂️ When she works, she’s a beauty, getting there is a labour of love

[@BadaBingPictures]

😉 Glad you enjoyed it mate, hah. Tropic Thunder is great! That restrictor in the nozzle is a pain. Kills the gas system with that inside there. Sorry to hear of your troubles.

[@sylithics]

Nice video glad it finally worked! 😂 for how long no one knows.. 👀 I’m hoping your going to review the guns modify Mws 416 at some point would love to see one as there’s not a lot of videos about them..

[@BadaBingPictures]

Hey bud, Thank you! Yes, exactly right…for how long….? I won’t say I’ll never review that. From what I’ve seen it has the finest attention to detail out of all the 416A5’s available in airsoft. Its so good it makes the VFC visually comparable to haemorrhoids. That being said, it’s just a TM in fancy skin. And I already have one of those so… I dunno.

[@반민초파-c5s]

Is hk416a5?

[@hanasununhamunagoyum]

An emotional piece.

[@vali69]

Mate I swear this is a fun vfc saga you're on. I'm still doing research on these vfc gbbrs and have started to lean towards the bcm mk2, it's the same v3 system, but the mags are the better v3 stanags with the red dry fire switch. What's really been making me lean towards it rather than the hk416 is that they have a 14in version and the stock furniture is better Imo. But I still can't decide between ordering from somewhere like kotte zeller that'll ship cheap and have vat paid but at a relatively higher price 730 vs 460 from asian stores, but those have like 100 euro shipping on top and paying vat is a lottery and with it it'd be like 650+ total, 100 less than the german store. So choices choices. At least I'm glad you've got a rifle that finally works properly for review.

[@dylandelmo3185]

As an owner of multiple VFC V3s i would put the BCM as one of the best out of the box. Close second would be the URGI! The V3 mags are an improvement over V2, but thats bot to say the V2's were even bad! Only thing that irks me with the BCMs is the inability to get them in a single tone 🤣

[@ulrikelleruodalrich6231]

if you are living in germany you unfortunately can't order weapons from asian stores

[@vali69]

@@ulrikelleruodalrich6231 yeah I know. Good thing I don't live there.

[@ulrikelleruodalrich6231]

@@vali69 that's a good thing indeed then :D

[@vali69]

@@dylandelmo3185 well the v2 mags have issues as seen in the previous videos from the dude and I've also read about it on reddit, but whatever. The bcm also comes in black, I've seen it on redwolf and kotte zeller, but personally Idk which to get. They seem the same but the black one is never called the mk2 while the dual tone is, even on the vfc site. So I think I might go with it, plus a tan foregrip, it'd look nice plus a tan eotech replica from holy warrior.

[@tylerzorro5902]

Soooo you're saying I shouldn't buy the A5 v3 standard version from redwolf without being skeptical (I live in the US btw). This purchasing gbbrs thing is unnecessarily scary

[@maiky129]

RedWolf is based in Hong Kong.

[@tylerzorro5902]

@@maiky129 ah, makes sense, wasn’t sure how the whole EU vs Asia editions plays into what we get in the US

[@MinamiX3]

You're fine. Im in the US as well and have the a5 bought from proaction. Just remember to buy version 3 vmags or stanags. There's a few tutorials on how to fix the bolt catch.

[@tylerzorro5902]

@@MinamiX3 much appreciated

[@RazorNLD]

Still, I am going for the A5.. But the MWS version instead 😉

[@g.p.airsoft]

Took them long enough to get that to work

[@jielee333]

Is this because its asia edition or because he got a good one?

[@BadaBingPictures]

Perhaps both. The shop done their part by testing it out prior to shipping, so they did their bit to ensure it was a sound purchase. I didn’t ask them to do it, they just informed me that it will be checked over. I’m delighted that they did.

[@jielee333]

@@BadaBingPictures I'm curious as I recently ordered a vfc mk18 from powair6 because they were the only airsoft store that had one in stock.

[@TehSnake586]

Good for you, man !

[@zhain0]

After my experience with the vp9, I'm never buying anything from vfc. There is no excuse for those getting through qc. I dont trust vfc to sell me anything that works.

[@stamfrank1]

I honestly don't know why he has such problems with the A5. I'm using the standard internals with red gas. I bought the stanags V2 and I never ever had any problems with bolt catch. Maybe I'm just lucky

[@bxne.a]

I used to pray for times like this

[@roxerpro100]

i think you where unlucky the first times, i had 4 of those and never had issues with cycle :o i'm in Denmark

[@AdumbrationOfAnAlias]

Where do you buy from? Powair6?

[@jielee333]

Maybe you just got lucky haha

[@roxerpro100]

@@AdumbrationOfAnAlias AA-store,powair,Rodes

[@roxerpro100]

@@jielee333 dont know, i never had issues with vfc other then my SR 25 ecc shitgun

[@BadaBingPictures]

I don’t know about that. Out of all the VFC GBB’s I’ve owned, the ones from the EU market have ALL had issues of varying degrees. That’s not just the 416A5’s. The ones I’ve had personally imported have all been a-okay. 100% functional, no fiddling around to get working.

[@Labbazz]

cool I bet the non asia models are assembled somewhere else with a bad QC... But I am gonna stick with my TM M4 cuz like Tod Howard says it Just works. It killed 2 red dots for me but that is it now I have a LVPO made for .22LR on it and that holds zero.

[@BadaBingPictures]

Assembled elsewhere by a subcontractor, who knows. Sorry mate. I don’t know who that is? And yes. Airsoft optics are generally rubbish at doing anything beyond looking the part. Some of them don’t even do that very well 😅

[@Gaz258th]

It might have some element of truth for the umarex lines as umarex do have a specific EU spec they buy

[@BikeWorkz1991]

But why?

[@AntonChou]

I am from Taiwan so every 416 here is Aisa Edition, could not bother to count how many 416a5 has bolt lock issues with HK mags. In fact 416D also has bolt lock failure if you insist on using that crap, or old Vmags for that matter.

[@hrldp4394]

I am glad you finaly got lucky! I bought myself one V3 from the advice of a friend, i was not into Ar platform at this time. I was quite happy, but for the price, it's still have problems: the buttstock fall into pieces at the first play, the fucking castle nut wich got loose as well, and the finish wich is easily scratch. Parts are easy to find and match with the real steel one but for the price of it... But well the rest of the replica work very well

[@maddragon3457]

At this point you could have gotten the Guns Modify 416A5 which is MWS based. :P

[@BadaBingPictures]

Would have been cool, although I already own the OG TM. So that checks the box for performance M4 GBBR.

[@cortbrailey5116]

this was funny af 😂😂

[@dannyotter7247]

Three, is the magic number ….

[@sketchy5085]

How does this even make sense? Do they just have two different production lines going, one for the asian market and one for the rest of the world?

[@stewbacca117]

I have wondered that myself at times... And we're spoilt out here it seems.

[@BadaBingPictures]

You’re more than welcome to receive some of our models instead. We’ll gladly swap for yours!

[@badwitchproject]

Back in the day myself and 5 mates all bought the first gen VFC aeg 416 and another friend bought their SCAR (H I think). All of us had the exact same issues on the first day of using them and that was the cheap shoddy internal wiring melted causing the aeg's to fire on full auto with no trigger pull needed. All needed a new gear box, motor and rewired to be able to work. Since then I've heard nothing but horror stories about VFC's quality control and I refuse to buy their products, much as I'd love their new SIG line I will not buy their stuff. Marui GBBR's might not be the greatest and TM are slow to put stuff out but at least they are reliable enough.

[@ordinarypablo]

honestly i think vfc just hates you, i bought the a5 v3 and havent had any issues

[@BadaBingPictures]

I actually think you’re right. They seem to share everybody else’s reviews on their products but mine. Hahah.

[@stephenadkins6425]

And this is airsoft in a nutshell.

[@derekporter66]

Why did you stop skirmishing

[@BadaBingPictures]

I wasn’t enjoying it like I used to. When I started, I was a teenager and I feel it’s something I’ve grown out of. Now I’d rather spend my time in peace and quiet, sipping coffee.

[@derekporter66]

@@BadaBingPictures I stopped for a few years. Been back a few times. Now it seems you need to spend 1k having the best or can't compete. Also the cheating really winds me up

[@gregoryfranks7347]

come on !! hell yeah tropic thunder is the best movie ever followed by the other guys. should have bought the VFC ump-45. gbbr mine has been pretty goddang good. I also grabbed a black de noveske and its actually so much better than I dreamed. its a decent gbbr but on mine the fit and finish are even better than both my krytacs. its one of the best feeling airsoft I've ever handled. I might have lucked out but I think its because every other dipshit thought they were going to war in Pakistan with fde ones. ha ha to them. did you at least bring KY and make an evening of it?

[@BadaBingPictures]

Tropic Thunder is one of the last great comedies. It couldn’t be made today, on the account of everyone being so sensitive. I’m quite fond of the UMP, but not fond enough to buy one. I know what you mean about the Tan Noveske M4’s. They look revolting. It looks like it’s made from old cheese 🧀. Ridiculously uncool imo. No KY unfortunately. Bubblegum tooth paste ftw

[@pyroromancer]

As a long VFC fanboy, I've had enough of vfc's 25% defective lottery. Careful with the D, the auto sear pin likes to slip out during gameplay and break a bunch of things with the next shot. Loxktite that up and put some tape over both ends

[@simonstokes369]

VFC are dodge balls

[@sogerc1]

While this conspiracy theory is far fetched IMO, the name still stands: Very Frustrating Company. So Happy New Gun Day? Is it?

[@BadaBingPictures]

The more I think about all the other VFC gbbs I’ve bought locally, the more I believe it. It’s not just the 416’s, now I think about it. Well, it was a happy day on the 14th when it arrived 😊

[@sogerc1]

@@BadaBingPictures Then enjoy! So I guess I just stick to my usual MO of not buying a VFC 😆, the only time I've ever bought an airsoft gun from outside the EU was the TM USP9, and even that was unnecessary because 1-2 years later they've arrived in local stores and I could fix my KWA USP anyway

[@NeoMartel]

VFC make good gbbr's replica, and is good platform for customing everything. Next get DNA rifle :D