VGate Magnet Motor Prototype

VGate Magnet Motor Prototype. This is a Soukup VGate magnetic motor. Different individuals have attempted to build a replica of this motor invented by a German inventor and a few of them have been successful in doing so. We watched the original videos of the inventor and liked his tabletop prototypes and attempted to build an almost identical copy of his prototypes. This is our first attempt at a VGate free energy magnetic motor. Its almost easier to build larger prototypes with very large and strong permanent magnets, but its very difficult to get it to work in a very small and tiny tabletop prototype. Because of its size, the rotor has only 3/8" magnets installed and 1/8" thick, there are 54 magnets on the rotor. The stator has 8 permanent magnets that are 1/2" wide by 2" long. We learned a lot by building this prototype. If spun by hand quickly, it can spin for up to 5 minutes before it comes to a gradual stop. The main problem here is the gap between the permanent magnets on the rotor and that of the stator. If the permanent magnets are too strong, the air gap needs to be even up to 1.5" apart because if the air gap is too close, there will be too many negative forces clogging up the movement, our air gap is only 1/2". We are thinking that if smaller rotors were built and different strength of permanent magnets, different results could have been achieved. We will attempt this type of motor again in the future.
Website: mindoftesla.com

[@victoryfirst2878]

I am just puzzled as to why the magnet motor just do not run continuously ???

[@klaus2424]

Sehr gut gebaut! Aber ich denke er läuft leider nicht. Habe das Modell auch schon ausprobiert.

[@patty1991]

Ich schaue jeden Abend nach "free Energy" bei KZbin, Filter: heute Und kommentiere es 🤣 Das macht süchtig 😜😂 Aber alles Quatsch.. Galvanic Law mehr nicht

[@ahmadnadeemkhalid7276]

i think we can not apply some load on this interesting device.

[@justindamirgian5977]

I have a very simple idea but do not have the ability to create it. Please respond if you are interested in my version of a working model.

[@scottgerlach6867]

A flywheel. Nice effort.

[@ftwproject658]

Glad you are continuing your journey to clean and free energy and self-discovery young man. Ignore the nay-sayers and bullies. I see the family support also. Much love. Continue the good work!

[@GaryMcKinnonUFO]

I think Soukup only used 5 drive magnets at most out of the 12 possible, imbalance seems to be key.

[@jhonbanner9991]

Si, se puede sabes que el que persevera siempre triunfa. Y tienes el talento y las ganas de seguir, y x eso te felicito amigo, muy buen video 👌.

[@overunityinventor]

Very nice and cleanly built 👍

[@danielmiller2886]

I like the way you think. I've thought a lot about these concepts too. No such thing as free energy but using these techniques to find a more efficient way to produce energy, that's where it's at.

[@andyhowlett2231]

But what use is it? We can see it slowing down down quite quickly, and I'm sure that any attempt to drive machinery or a generator with it would cause it to stop instantly. I'd like to see a version without the stator magnets, I bet it would run for the same time just by flywheel effect.

[@grndragon2443]

I would try to have the outside magnets spring loaded. Have a camshaft push the outer magnet away at the brake in the inner magnets.

[@sagmalehrlich]

Das ist wirklich ein sehr gute Erfindung, du solltest es zum Patent anmelden. Leider eine schlechte Nachricht: Diese Erfindung müsste funktionieren, damit du ein Patent bekommst. tja, es läuft nicht immer so wie man will. 😢

[@sagmalehrlich]

This is really a very good invention, you should apply for a patent for it. Unfortunately, bad news: This invention would have to work in order for you to get a patent. Well, things don't always work out the way you want.😢

[@junksilence1346]

Nice try

[@mikegardner400]

Question.. Do you think you could make one with enough torque to spin a pulley on a car alternator?

[@kyledavid7482]

Graphite Bering's would have less friction

[@newventure4747]

I think you should make the wheel unbalanced, that way gravity will help it past the sticking spot.

[@newventure4747]

@@valveman12 I thought the magnets did that? Have the sticking spot at 4 or 5 o'clock, then the beginning of the Vgate at 6 o'clock.

[@Johan.A02s]

Will be stop to spin... Real V-Gate will 'automatically move' after you put main magnet to the V-Gate track... In your Video, no movement and need to 'spin manually' 😅

[@nilsonbernardes6442]

Mais um troço ridículo e sem função. Da onde que isso funciona sozinho?!

[@ToddDesiato]

Wasting your time. Free energy comes from the sun, and that's about it.

[@markrimmer4567]

Wrong mate. Look and learn. Look at my comments and make one . It works

[@ToddDesiato]

@@markrimmer4567 Where's the data, in Watts and VA + Phase? There's a little problem with all permanent magnet motors. It's called, Conservation of Energy and Momentum.

[@markrimmer4567]

@@ToddDesiato the only way to prove what I’m say is for YOU to make it. It’s very easy to make. If you have them in series, they act as a flywheel. Try it it’s simple to make. I explained it in my other comments.

[@ToddDesiato]

@@markrimmer4567 Never gonna happen. The EASIEST way to prove it is to connect a Watt meter to the output and measure it. You have one, do it! Stop scamming the internet with BS because you refuse do do the proper tests.

[@markrimmer4567]

@@ToddDesiato that’s a bit harsh. All i suggested was that you make one. I even gave you details on how to make one. It might have seen fun for you to try. Anyway BYE!

[@romanivancheko3700]

Супер🤝🤝🤝🤝🤝🤝🤝🤝 👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👁👁👁👁👁👍👍👍👍👍

[@FreeEnergyNerd]

very nice build!!!. are you using laser cutter or cnc? which model? As for the motor, george soukop is a fraud. He himself admitted in march 2010 that he was wrong and that "his invention" did not work. But even if it doesn't produce any free energy, I must admit that it is the nicest build of a v-gate motor i have ever seen. Luc

[@namasnamas3002]

Soukup motor replica?

[@patty1991]

Copy Link , Share him

[@patty1991]

George Soukup.. was ist aus ihn geworden ?

[@enzodisplayz]

Why is nobody using a camshaft to put neodymium in it and give it a try?

[@ahmadnadeemkhalid7276]

will u use this interesting device as a TABLE FAN ?

[@SharhbiniRauf]

YOU FORGET FLOAT MAGNETIC BEARING.

[@liliklilik4461]

Cool man.. end very simple.

[@vincenzosantangelo3262]

Impossibile! Si fermerà... O metterai altri magneti in movimento!

[@山崎仁志-m5e]

すごく〰〰いい、ＵＦＯ技術か、

[@markrimmer4567]

A slide crank would solve the problem of cogging. Moving the repulsed magnet away from the cogging and then move it back in after the cogging magnet has passed. I’m making one ATM

[@markrimmer4567]

You should make at least 5 of them in series’s on one shaft, to push the other over with constant force .

[@markrimmer4567]

Also add more magnets opposing the v-gate! All the way around. For more power. The only problem is the initial cogging. Which I’ve solved the problem of above .

[@markrimmer4567]

The repulsed magnet is on the end ✌️

[@markrimmer4567]

Oh and have all the magnets on the v gate the same direction with south facing out.

[@justindamirgian5977]

If you have the ability to make these and can rather easily can I give you an idea

[@gregstafford2155]

How does this one work Daniel?

[@patrickwatkins7572]

it dosnt lol, but well done on the last one daniel !

[@DanielsInventions]

According to the inventor, imagine 2 rounded permanent magnets side by side 1/2" thick by 2" long. If they both lay side by side and both of them are facing the same polarity north, north, south, south, both of them will try to repel each other and roll away. Now if one of the 2 magnets is flipped around, then they will be in attractive mode and attract each other (NS SN). This motor is supposed to run on the same principle, the only problem is the permanent magnets in the motor are stationary, they don't move. If the magnets on the stator are flipped around, the motor will work either in attractive mode or repulsive mode. Now the only way to achieve that is to build a VGate on the rotor where the permanent magnets are closer to the end of the rotor. Lets say they're 2" long, then they get progressively shorter around the rest of the perimeter of the rotor. The permanent magnets on the stator will notice that difference and begin to pull the rotor or push the rotor depending if the magnets are in a repulsive or attractive mode, but only for about 300+ degrees of the rotation and then it gets stuck. Now if placing say 4 or 8 permanent magnets in the stator spaced equally apart around the rotor, the idea here is that while one permanent magnet is stuck and needs help to overcome the sticky point the other seven remaining permanent magnets in the stator are all having positive force and moving forward towards the sticky part all at the same time. The hope here is that the combined positive forces of all seven magnets pulling the rotor forward is greater than that of the one permanent magnet being stuck and needs to overcome the sticky point.

[@SINANOZYOLDAS]

I am ready to carry out the electricity generation project with angular resonance together with investors who agree to make an official protocol. I have worked for 15 years for this project. After the official signatures are signed, everything will be done openly.

[@Mohammed-cv7uj]

Gooooood. 👍

[@giannineve]

No. Un sistema chiuso porta con se un carico crescente di resistenza magnetica. Al Termine dei 360° la resistenza finale farà andare tutto il sistema a 0. Poi ci sono resistenze dell'alternatore, e si va a - 1.