Victorinox Spirit MX Clip

[@AYellowPepper]

Its important to note that victorinox replaces all tools when worn down for a small fee! I send in 3 heavily used vics ad they came back with brand new replaced tools! :D

[@maxlvledc]

Awesome as usual! For me the P4 is almost the perfect comparison...even more so than the Wave

[@appleztooranges]

This is the ultimate multitool. I think Victorinox has done a better job with their multitools rather than leatherman the last few years

[@stefanaleksic4113]

Victorinox makes everything that works Leatherman not so much. This is Switzerland precision!

[@limsan9977]

Yes totally agreed and the only mt of this size i will use and keep

[@MrCabc88]

Leatherman always fail with at least a nonsense tool.

[@appleztooranges]

@@MrCabc88 the curl and bond was their jokes

[@MrCabc88]

@@appleztooranges yes, I love the wave plus but give me an awl instead of a mini screwdriver.

[@triumphant39]

They put alot more into the aesthetics, that's for sure. This has to be the most handsome plier multitool I've seen.

[@AlvinMann-u4k]

I would agree, but I wonder if long term which would make the better tool. A lot of people I know love their Gerber multi tools! I guess it depends on needs and what works comfortably for individual using them.

[@greekveteran2715]

Victorinox Spirit series especially the X and this model, are the best multitools ever made in my opinion.

[@ricosetyawan5507]

I've been using the Swisstool Spirit since 2014. Love this multitool, very ergonomic shape, good rust resistance. And since 2014 this is my one and only plier based multitool.

[@SandShark350]

How do you like the sheepsfoot combo blade?

[@ricosetyawan5507]

@@SandShark350 I love it, very sharp of course. Easy to cut things like rope and plastic.

[@SandShark350]

@@ricosetyawan5507 I've been going back and forth for a long time with deciding in that blade or the typical spear point. Leaning towards the sheepsfoot, I think I'd probably end up using it for more tasks.

[@ricosetyawan5507]

@@SandShark350 At first, I bought it because the seller gave a very attractive price for me. I don't really like the blade model at that time, but over time I like it.

[@willh1755]

Hey Ben, I've watched a bunch of your videos over the last few months, as I've re-discovered my interest in multi-tools, and I gotta say: along with Jon Gadget and Felix Immler, you put out some of the best, consistent, most informative content on this kind of subject matter that I think I've seen lately. So, thanks for that! I wanted to expand on some ideas / thoughts that I have seen you and/or other express in your videos / comments when it comes to the 'Leatherman vs Victorinox' comparisons. While I, personally, am not as "big" on the idea of carrying extra bits/tools/accessories for a multi-tool, I get that it can be useful. In this regard, it is worth mentioning, because i'm not sure if you or my fellow commenters have before, that: - a standard 3/16" or 1/4" (hex) bit adapter can fit on any Swisstool or Swiss Army Knife's bottle opener if "placed diagonally." Meaning you could use 3/16" or 1/4" standard bits fairly easily with a Victorinox!! I'm not sure if you know what I mean, but you can test it for yourself. I think Felix Immler demonstrates this in his video on uses of the bottle opener / cap lifter. In this case, a Victorinox Swisstool can further "close the gap," imo, on the Leatherman Wave/Charge/Surge. If you take into account that the Vics are lighter weight (about 30-50 grams) compared to their "direct" competition on the Leatherman side, i'd say adding bits ("10 pack") to each tool (standard + adapter for Vic. Leatherman proprietary for LM), they'll probably end up comparable in mass, while Victorinox could have the edge due to the versatility of the more conventional bits. So, if you were to do this... I think Swisstools can now have another advantage. Especially the new 'MX' one-handed models. There would be little-to-nothing missing from the Swisstools. Imo, the diamond file and serrated blade of LM would be really cool to have, but are not necessarily imperative. Conversely, I believe that the awl and wood chisel are two huge missing tools for Leatherman (Wave & Charge specifically)... particularly for outdoor/survival/all-aroung purposes. I love my Leatherman Wave, especially when it's -15c and I am working outside. It has a few advantages that can't be understated, imo, like the one-handed opening tools. However, now that Victorinox has come out with these 'MX' models... man, I starting to think... if i'm torn between my Leatherman and Swisstools right now, I might not be after getting a Victorinox with one-handed capabilities. Don't get me wrong, i'd take a LM Wave/Surge or Swisstool X / Spirit X (even a SAK like Swisschamp) any day, especially if my life depended on it! I don't really even consider anything other than these brands/models, tbh. Top class! Sorry for the long commentary, sir. Lol! Have a nice day!

[@txtoolcrib]

I will try exactly what you suggested. I also think you made some fabulous points and I appreciate your input.

[@willh1755]

​@@txtoolcrib Hey Ben, So, here's the Felix Immler video clip that I was talking about ( kzbin.info/www/bejne/a56uloGHjrGUo9k ) that shows how to use the 1/4" square-to-hex bit adapter on a Victorinox. Upon review: - I tested it again on a SAK Handyman, the Swisstool X, and the Spirit X. I'd say it's more of a "legitimate fit" on the Swisstools as opposed to the SAKs, but will work okay on the knives in a pinch. - It works relatively cleanly (i.e. tight fit) using the bottle opener on the Swisstool X. However, because of the thicker steel on the Spirit X bottle opener, the better fit on that model would be putting the adapter on the wood chisel/package opener tool. Very tight. Worth trying and considering a demonstration in your upcoming 'Leatherman Wave vs Swisstool Spirit MX' comparison video, I'd say!

[@limsan9977]

I chose mx clip over wave because - all tools can open with out opening plier - mx clip has more tools (22) and wave less (18) - high rust resistance - softer steel easily to sharpen -softer steel also will bend and not break - more compact - ergonomic handle - will not be pinch by the closing plier accidentally like wave - like the shiny finish of spirit than wave; look more elegant and cleaner - easier to maintain - clip ready there

[@chrisfyfe9212]

The build quality on Victorinox stuff is Stellar ! Sadly the same can’t be said for it’s American competition !

[@foxwood67]

Simply said its a better tool. 🙂

[@chrisfyfe9212]

@@foxwood67 Agreed !

[@Cooldibs]

I don’t know about easier to maintain since the victorinox can’t be taken apart! I prefer my wave over my spirit because where I work, we use a lot of Philips and torx bits and being able to carry multiple bits and exchange them is super convenient!

[@limsan9977]

@@Cooldibs you have a point also, wave can be taken apart, bit exchanger, etc... I chose mx clip mainly bec they dont rush easily

[@Mike-kc8rl]

Nice update to a good multitool. The scissors do open up wider for one off cuts! You pull on the open scissor arm and the cam allows for this and you get a very powerful cut for string or chord.

[@chrisfyfe9212]

Congrats ! I got mine a couple of weeks ago , I really like it ! As the tool itself is precious , 90% of the time I carry mine in a custom wet molded pouch ( clip and tip down ) . The main reason for this , I would purely hate to lose it ! If I could have a wish , it would that the tool would be able to use “ T” shank/ SDS jigsaw blades .

[@miguelmal]

The one thing that made me most hesitant to buy a Victorinox multitool is the absence of a pocket clip, I’m not big into sheaths. Love that they made something that will work with older models rather than try to make everyone buy a new multitool. I think I’ll be buying one soon. Thanks for the video!

[@piotrmarczak3733]

Dear Ben, 2 notes on your fantastic review. 1) It is quite easy to open scissors wider, past the first line of the spring resistance without damage. 2) In my opinion the Spirit saw is much faster than replaceable LT Surge (I dońt have Wave) because it bites in both directions. Thanks

[@TheGrenadier97]

I'm tempted to consider this the best multitool ever, even over the standard Swisstool. Impressive how two quite basic changes - clip and one hand opener - changed for better what was already excellent.

[@FlyHighAndFar]

Early rewievs on the victorinox webpage ( mostly in German and French so far) seem to indicate a common problem with the clip attachement: the screw shears off easily even when tightened with moderate force. Its a shame, I really want to have one of these. I hope the problem can be fixed soon and a tougher screw can be accommodated.

[@scotts.1401]

Had this failure with my clip when I was installing it. At first I thought I’d cross threaded it. When I took a closer look the head and screw top had come apart. When I contacted Victorinox they quickly replied that I would be getting a credit (I had purchased the clip directly from their USA website) and apologized for a manufactures defect.

[@KiranJonnalagadda]

Same. Luckily Amazon let me return it for a replacement, and I was careful with tightening it the next time.

[@1970jeebee]

Had the same

[@russellschreiber5802]

Have the MX and it is excellent. Also have a Wave + and something I think might be important regarding the pocket clips. The Wave + clip is actually defective in that its placement allows the Wave to open in the pocket because of how it is configured. If you are active, the Wave will open in your pocket. The MX on the other hand due to where they placed the pocket clip prevents the MX from opening in the pocket. Threw away my Wave + clip and just carry in the pocket. MX pocket clip is excellent.

[@ThePSMA]

Fantastic, clear and assertive review! I was in doubt between the Free P4 and this MX with a clip, this review cleared everything out. Thanks

[@insanogeddon]

I'd argue though that the NXT is currently still the best value-for-money MT on the market. Outside opening, all locking, decent ergonomics, thick stock for the driver's, good scissors, good tool selection and easy to carry.

[@l.nassah6728]

A minor adjustments they could have made to the clip would to be extend the side to slightly touch the other edge and top, to kind of cup the frame. Then screw it and it won't move side to side and upand down. Unless it might interfere if the tool is open🤔 It doesn't seem so thou

[@BullDog757]

What I did to the clip is bend the side where it attaches to the corkscrew holder ever so slightly. That way you don't have a gap between the clip and the multitool, and it basically eliminates all the side to side play.

[@panagiotisandoniou2899]

The field master Dat I have is the heck of a multi tool together with leatherman wave

[@mountainbearoutdoors]

well 21 years with an original swiss tool and it is still looking good despite me being less than gentle with it. Leathermans I seem to warranty every year or 2.

[@benningsniper9516]

I've had the opposite experience

[@peddypeoples941]

if the product is good in the first place one does not have to innovate often:) i slapped that clip on my swisstool x from 98 and love it hehe and a small trick i invented, put a splitring on the back of the clip where it leans on the tool, makes for a good lanyard attachment.

[@edgaraquino2324]

Hello, Ben - great review! Looking forward to your comparison review of the Wave + and the MX...the one thing that will keep the W+ slightly ahead of the VMX will be the cutters...I do not see V. re-engineering their plier heads and everything that goes with such a change any time soon, other than the change that you described in this video...the clip and the "one-hand" opening that they did was based on great demand; I do not think it is part of their corporate culture...their response was make the tools and clips and charge a hefty price for them...and they are selling, regardless of the price, like hot cakes, so far...the W+ has more tools that can be opened one - handed, as you well know, and their warranty is great...I have never upgraded to the W+, because I wanted more tools, so I upgraded to the Surge...also, I had heard that there have been QC problems with the W+, which I have not had with the "New Wave"(Gen. 2)...(advantage VMX)...I like the NW in part because it does have more plier real estate and I'm careful how I use the cutters...also, additional tools can be attached to the Wave(and the Surge) which the MX and the Swisstool can't do...

[@dabomb5505]

But all tools can be open from the outside with victorinox safes you alot of wear and tear on the plier joint.

[@lvhdmya4807]

The wire bender can actually strip small gauge wires

[@Genesis992]

I have the clip on my MXBS, but I think I prefer it in its sheath with the ratchet and bits

[@foxwood67]

Which sheath are you using. Im not a pocket clip guy either

[@Genesis992]

@@foxwood67 umm. There’s a brown one Victorinox has with Velcro that has space for the tool, a bit tray with the 90° driver the little straight driver extension, ratchet, and the corkscrew. I’ll see if I can find it. The only way it could be better is if it used a button instead of the hook and loop

[@foxwood67]

@@Genesis992 thanks

[@Quadrille763]

Excellent I have one and love it need one in black

[@Mithadon]

Never been a fan of the fingernail opening on my Victorinox SAKs, it can be very difficult to work with sometimes. HOWEVER... having recently tried a Leatherman, I much prefer the way the Victorinox tools open individually.

[@ashsmall8103]

when will they make a model with cybertool bit driver?

[@miketsaron7284]

Tomorrow

[@hlpang1075]

Unfortunately this tool does not seem to be available anywhere other than Canada ?

[@Benzion-x3q]

Cool but I think I'll go with the MXBS because I have little use for scissors that only open that much

[@fc436]

The reverse orientation of Victorinox pliers makes no sense in unscrewing a bolt normally with the pliers parallel to the plane. but it only makes sense to unscrew a bolt with the tip of the caliper vertically to the plane. in this case it certainly increases the strength of the pliers and reduces the stress on the pivot

[@Erunanethiel]

Hello, did your swisstool spirits come with any play in the plier pivot? I just received my spirit mx clip and there is just a tiny bit of play and I am trying to figure out if that is normal.

[@scott762mm]

Those are sweet, I have too much money invested in leatherman but eventually I will have a Swiss.

[@sephegos5016]

I’ve been trying to order this for months. Became available last week. Just got mine today!

[@foxwood67]

Im more interested in the mxbs due to the serrated blade. That is something i use regularly Fantastic review. Im not a pocket carry guy so the clip is meh to me

[@Anvil09Erbe]

I also prefer having both blades. I purchased the MXBS last week and added the B.O. clip.

[@nejikon]

what functions are you getting out of the serrated?

[@Benzion-x3q]

Would go for MX Clip but if scissors only open that much I think I might go for the MXBS

[@Cooldibs]

I just received my regular spirit x. Does yours seem to have any slight wobble in the pliers? Mine has a little and from what I’ve read to doesn’t seem too uncommon.

[@lucasalves-sq6iz]

hello! i just bought a spirit X and noticed the same. do you just live with it?

[@lighteningwawa]

Hi Ben! Thanks for your videos! I made quite a few purchase decision based on your videos. Have one question regarding SwissTool Spirit: I have a Spirit X whose pliers have quite a bit of play. I exchanged it from Amazon, got another copy with the same issue. The plier play is just too much so the pliers don’t cut stranded thin wires very well. Based on your experience (since you have a few Spirits), is it a common thing? More importantly, is your copy of the new MX like that? Really consider buying them but I am a bit worried about the same issue. Thanks!

[@RambloManiacs]

Looks like the clip is touching the other side and making the pliers bounce back open. That could cause damage over time and use. Is that the case?

[@miketsaron7284]

Not big deal… no make sense

[@davidkay1386]

Another great review. Thanks.

[@Powernoodle_]

The wiggle on that clip does not live up to the high quality of design and manufacturing on the Spirit as a whole. Its enough to dissuade me from purchasing the clip model.

[@VinnieNiZero]

awesome review, i have my reservations on victorinox. i had one victorinox executive, the blade closed on my index finger and snapped in half. i got a refund w no resistance but i never bought another victorinox or wenger ever again. how is the blade on this spirit?

[@magicdave93]

Great review Ben, this is one I will be getting as it has everything I need.

[@panagiotisandoniou2899]

Try the Leatherman wave is the heck of multi tool

[@christophersteidinger7466]

Where can I buy a victorinox beautiful mutation in Chicagoland

[@efficientrealities960]

The MX is going to be lovely alongside my Rebar, the medium tough crew lol Kind request for a comparison between the victorinox rangergrip and a leatherman k2/k4? Thank you for some of the very best multitool videos ever made 🙌🏽 Godspeed

[@alejandroc1062]

Great review! One question: is the clip on the MX Clip model removable? Seems obvious that it is since the actual clip is (?) the same that is sold separately, but in another YT vid the reviewer said it was not removable 🤔

[@txtoolcrib]

It is definitely removable.

[@ashsmall8103]

please do an updated video on your super surge as it looks like u have added some new additions

[@jb-sh1yh]

Just got the black MXBS with the clip, nice tool and a lot easier to carry than my Charge TTI. But the already strange knife is even more small on the OHO spirits. I’ll give it a try but doubt it will replace my Charge for EDC.

[@drew123saulpaul]

How have you ended up liking it?

[@thealchemist5376]

That clip seems to prevent the plier tips from closing down completely, without force.

[@michaelharp9088]

I would absolutely love to see a review of the Swiss champ xavt

[@Cooldibs]

Can you make a video on how you made that cable cutter on your surge? Thanks for the video!

[@txtoolcrib]

It is part of my Super Surge playlist.

[@ste-c1218]

Wobble side to side on the main blade for me.... not happy... moved all thr other tools sideways next to it when trying the lock up.... never even used it right out of the box : (

[@justins.2429]

I love your videos

[@Traderjoe]

I really wish they could have put the standard Victorinox scissors, like on the larger models, on this. The mouth opening on these have always bothered me.

[@drew22]

I would like to see a behind the scenes of how you make your videos. Do you script videos? Do you record a ton of vids in a row and release them spaced out? How are you able to upload so frequently? Questions like that I’m curious about may make for good content

[@txtoolcrib]

I have done one early on to show people my simple setup for camera and lighting, but it wouldn’t hurt to go a bit more in depth. I will say that I usually don’t operate off a script very often. Sometimes I will have several takes, usually because of background noise or I didn’t word something exactly how I had intended. This particular video was done in one take on three different segments. I find it is easier to do things in segments than just straight through, gives me time to collect my thoughts to relay all of the information I intended. Most of the work is not actually the commentary in a video, it is getting the camera angles, lighting, and sound just right. Hopefully my videos have improved over time. I may make a video of the actual process of making a video, that could be very helpful for aspiring KZbinrs out there that are trying to get started. Honestly, that would have been very helpful for me when I got started.

[@gelartab]

Thanks for your videos! I want that so much! Perfection for me ❤️

[@wizardofahhhs759]

Victorinox is a tough act to follow. Leatherman, take note.

[@ger13nunyah56]

This is the way

[@james-butcher]

they should of used a victorinox sentinel knife instead of having thumbgrip stick outwards.

[@Caymalam]

Nice review 👍👍👍

[@dobie-at-home]

There’s some Swiss thinkin’ for ya. Don’t build a new one, dummy… just FIX the old one! You have to kinda admire that! 😁

[@gigilaco]

Typical Swiss tool. It works very well but nothing is innovative, at least not like Leatherman innovation. I’d still go with Leatherman.

[@cwsmith17]

Thanks for this video

[@robertdufour2456]

Great review!

[@Pfuetzensammler]

You carry the knife pointing upwards. Just imagine it opens a little because of the protruding "catch mechanism" catching s.th. without noticing. Next step: you want to use your tool, without looking of course. excuse my poor english, i hope you understand my thoughts. In my opinion no improvement at all.

[@robertdufour2456]

Pricey

[@rpmcaicara]

The blade it is too small

[@foody1991]

Out of stock :(

[@GALAPAGOSWINDSURFING]

Also the design is pretty smart. At one side you have the wood tools (saw blade, owl, chisel and knife) and at the other side the metal tools (screw drivers, metal file) For me it's much superior in design, quality and ergonomics to the Leatherman signal, Micra and squirt ps4 that I also have. Only the Leatherman juice I think is as good as this victorinox. Is small but with many tools and great quality and design too. The other Leatherman are kind of disappointed. I don't know the wave but looks like a big piece of metal ramdonly design with plenty of hot spots (like the signal) instead of this elegant, ergonomic and well thoroughly designed victorinox.

[@drew22]

Not first.

[@andreigolovik3047]

Of course they put the clip on the wrong side... Leatherman does the exact same thing and it baffles me

[@lvhdmya4807]

LOL victorinox are infamous for preferring lefties. Their 111mm and 130mm knives and even the folding paring knife have liner locks that favour lefties.

[@andreigolovik3047]

@@lvhdmya4807 It's not even a problem of left or right hand: the clip placement just doesn't make sense. At least on something like the Skeletools, the clip is on the opposite side of the knife so you can actually access the knife without flipping the tool around. The other problem is that both this clip and Leatherman clips that are *meant* for right hand carry have the clip on the wrong handle, causing the tool to gyrate in the pocket lol. Clips should always be opposite side and opposite handle from the blade (or whatever one-hand opening tool is considered the primary one).

[@k9teamzagrebskolazapse149]

I see chines kopiying Leatherman tools like crazy but not Victorinox I have Victorinox Spirit MX clip with newe moly sheat and its more slimer than Leatherman and for belt I forget to haw it and its the best multi tool.

[@davidoper1]

Based on this video… I will keep my leather man.

[@eYeSoN3691]

I’ll stick to my leatherman

[@synlfo7828]

the Nox is a beautiful piece of kit. Leatherman is good but I always feel its rough around the edges, metaphorically speaking. Scissors are ass. And I hate it when all the tools come out at once. Also you have to open it to get to them. The nox is like a precision made tool.