Victron Cerbo GX tutorial

[@WadeMD]

Thanks John for your tutorial. Love your setups and all the help you've given me.

[@earlzeis35]

How do you interface your generator with the Cerbo system to show on the touch screen?

[@truchelitrucho9963]

The input current limit also depends on the size wire gage you have run to the inverter

[@charlestyer2164]

If you are plugged into shore power, why does the display say 'genetator'? How do you customize three 3 Cerbo pages?

[@muntee33]

Does the display require that camera for any of the standard functionality? Does it scan QR codes of products for easy installation/incorporation? If not, is there also a pointless inbuilt microphone like a regular tablet? I find the seemingly pointless incorporation of a camera pretty strange.

[@RKCFALLC]

My Cerbo GX and GX touch, don't show my two solar controllers, is there a way to manually add a device. I have them connected directly to the Cerbo GX via rj45 lines to V.E. Can port on the GX.

[@simontredwell991]

Can you tell us what those little led type lights indicate on the inverter image as I have one of them lit up red but have no idea what it means

[@airgun1974]

I see others have a shortcut on the screen for 30 amp 50 amp etc. how do you do that?

[@Van_Liberty]

Question: Do you know if there's any way to extend the cable length on the GX touch panel? Is it correct that all I need is a USB and HDMI extender cable to get me to where I want to go? I just looked at the GX pdf manual and it has a great image of all the interconnects.

[@BoonDoctorJohn]

You can extend the HDMI (I have hear of up to 25') and use any remote usb power.

[@socaliguy81]

Just know that any extension not from Victron will void your warranty on the GX.

[@gregorypeck2893]

So with this I can see all that information on my phone from anywhere in the world?

[@northeastcarpfishing]

Hi I've just bought a cerbo gx and screen on yours the screen there's a little box middle lower part of screen dc power mine hasn't any idea why please

[@RickysHP]

Here is how you turn that on, on my video: kzbin.info/www/bejne/pGS5Y5eQZ5mJorM

[@caboon4639]

hi. is it possible for you to log the DC consumption?

[@davidpermenter6527]

Good day. How far does the Color GX 50 stick out from the wall?

[@SolarPowerMyRV]

great tutorial!

[@LowOnCash]

Greaat Information Thank You!

[@MichaelPickles]

I'm looking to install a Victron Energy Quattro 48V 10000-140-100-100 and Victron Energy Cerbo GX. I don't want the Victron Energy GX Touch 50 as I think I will not use it. A supply has recommended that I install one to make setup easier. I will be using PylonTec battery's with 21kWh that start with. I'm looking to have the system tripled with 3 Quattro 48V 10000-140-100-100 and 3x 24kWh stacks This is for a house install. It would be rare that I go in that outbuilding.

[@MrRiffraff7]

Great video, how do you add the DC power on the video screen?

[@danielrollins4315]

Does the quattro offer the remote start and stop for the generator? Is it a separate accessory?

[@augustjake]

what if my screen is suddenly black? I have power though?

[@jjr897]

Is it in sleep mode? The screen turns off after a few minutes of no use. Should just have to tap it to come back on.

[@managersamuel]

Can another user register this cerbo gx on vrm directof you sold it?

[@BoonDoctorJohn]

Yes, the VRM ID can be transferred or even re registered with Victron's help.

[@RollinHomies]

LOG INTERVALS! This eats the data up.

[@BoonDoctorJohn]

They are just ones and zeros, I don't notice a difference at all with my system. I believe that an 8gb card can hold >5 years of data??