VIDEO: Perlick FOB (Foam on Beer) User Guide

Рет қаралды 10,598

Perlick Corporation

Күн бұрын

Пікірлер

@tabernashtaps8232 4 жыл бұрын

Clear, concise and straight forward product demonstration. Kevin?

@danjohnsonspam 8 ай бұрын

So once you change the keg & then resume the pour from the faucet, won’t the beer (at first) still be the old beer?

@PerlickCorp 8 ай бұрын

Hello! Yes, there will still be remaining beer in the line. If you are changing over a keg of the same beer you will want to run the beer out of the line. If you are changing a keg over to a different type of beer, we recommend flushing and cleaning the lines to not mix flavors.

@danjohnsonspam 8 ай бұрын

@@PerlickCorp But isn't the main advantage of a FOB detector being that you don't waste the last of the beer in the line after the keg empties (that you are able to sell the last of the beer still in the line)? And by running the beer out of the line, aren't you negating that advantage?

@brewdaly1873 8 ай бұрын

@@danjohnsonspam fobs are also necessary if you're using a pump system, to keep the pumps from running while dry. Other than that I'm with you, their response doesn't make any sense. The beer in the line shouldn't be that old, so if you're just putting on a new keg of the same beer there's no reason to flush it. That does highlight why I think fobs are usually a waste of money though. If you clean your lines whenever you switch kegs, or have a constantly rotating selection, they won't save you any beer at all. They're only useful if you have pumps, or on lines dedicated to one specific beer.