Alientech KESS V2 Training - Car Tuning and ECU Remapping Training

[@oliphantspares7015]

YOU ARE GOOD IN YOUR INFORMATION DISSEMINATION.

[@ViezuTechnologies]

Hello thank you for your comment. We can help with any questions you may have to use the Alientech Suite Software. If you want to send or call us at the office we can help our details are [phone] or [e-mail]😀

[@JohnZornAscended]

Which software and hardware would you recommend for appropriate for viewing live data. Such as AFR, knock, cam position. Etc… Would the V2 obd Master work with the new software?

[@ViezuTechnologies]

Hi, we tend to use B-Flash or Autotuner for data logging, we also use other tools depending on the project and car, Alientech should be releasing datalogging shortly on the kess3

[@paulfeugaing1339]

You are very proffessional

[@ViezuTechnologies]

Thank you

[@vlasesilviuandrei6503]

What about the lower right side Accessory tab ? If the car has several accessory codes how do you choose the right one if the automatic id doesn’t select it. For example i have a Opel Vectra C 2005 1.9 CDTI 120hp stock and have several codes in that section. What do they actually mean ? Thanks a lot !

[@ViezuTechnologies]

The accessories shows you what is possibly required to use that specific protocol and option you are looking at currently. If you are selecting OBD, it will show you obd accessories, ktag it will show you the accessories for the connection method you have selected and so on. When you proceed to option the instructions it will become clearer as to which accessories are required for each connection method. I would advise though, with the age of the tool you are using, for the latest and greatest range of vehicles supported , reading and writing speeds, you should look to upgrade to the KESS3 to unlock your full tuning potential. Contact [e-mail] today to discuss upgrading your old Alientech tools to the new KESS3.

[@THEMECHANIC0428]

Can anyone tell me if the kess V2 master version will tune my 2010 Tahoe 5.3?

[@ViezuTechnologies]

Yes its listed, though the KessV2 has now been upgraded to the kess3, you can see more here : viezu.com/alientech-kess3/

[@m2rookie]

I can also use this to flash my ECU and tune it myself correct? I need this as I will be adding cams etc and so I cant just buy a preset tune.

[@deepthoughtdeepbreath2383]

New to this. Any luck yet?

[@ViezuTechnologies]

I am sorry we missed your message, yes you can use teh software to tune your own car, if you want to drop us a mail to [e-mail], we will be happy to help, you can also see online training courses here www.remap101.co.uk/courses/overview-of-alientech-ecm-titanium-software/

[@ViezuTechnologies]

Hi How are you, can we help with anything ?

[@aasifkhan349]

Eicher trucks are in category

[@dorybuzlea803]

So, if i want to get started on tuning, what exactly would i have to buy? I wanna start from scratch. Cars-only ! Thank you !

[@ViezuTechnologies]

We offer this exact service, your training can all be done online or in class with us, and the training is free. You may also like to see our new Kess3 Training video's on KZbin. Generally speaking, you just need to purchase a tuning tool to join us, there is no joining fee to pay, you just need the tuning tools. If you can drop us an e-mail to [e-mail] we can send you full details, options and prices

[@dorybuzlea803]

@@ViezuTechnologies Thanks so much !

[@ra8620]

Before do it you need to gain knowledge of ECU tuning simulator to learn engine map environment.

[@ViezuTechnologies]

the dealer tools are very easy to use, and the new modified tuning files are provided ready to use and load, quick and easy, we also offer master tuning file writing training - so you have the best options available - drop us a mail to [e-mail] if you need any help or advice

[@meksudmehdi5257]

Plzz i want this tools but i have one question this tools properly work for remove and diseable dpf and adblue???? Plzz help me And how long day for expire date?? I want this tools only remove and disable adblue, dpf, egr, and, DTC, so this tools it can do these??? With out internet conection??

[@ViezuTechnologies]

Hi yes, the kess 3 can be used to achieve these type of tuning files. However, it can only work with internet connection, you can see more on teh kess 3 here : viezu.com/alientech-kess3/

[@meksudmehdi5257]

@@ViezuTechnologies This does not work kess v2 ??? And kess v2 It does not work without internet?? Plz bro help me

[@ViezuTechnologies]

The KessV2 will work and can be used for removals too, but it has been replaced by the kess 3 now, and will not be supported after April, both tools do need internet to work. please mail us at [e-mail] if we can help with anything .

[@ra8620]

I think buy a spare ECU and do what ever on it by cloning and modified don't need to ruin a stock ECU always use a ECU from scrap yard.

[@ViezuTechnologies]

There really is no need at all to buy a new ecu, we tune thousands of ECU every month across over 78 countries, tuning can be very safe and very reliable when done with teh correct tools and training. Drop us a mail to [e-mail] if you need any help or advice

[@bt5r2hacker]

Hi, can i read my bad ecu with this and write to another used one ecu wich is in good condition? if i can that means that i will have to take out from car bad ecu after reading and put another one (good condition) in car and proced with the writing, right?

[@ViezuTechnologies]

This process is called Cloning, where you copy the data from one ECU to another, making a direct and identical copy, this process needs to be done on the bench, so connecting direct to the ECU, the new Kess3 offers both bench and OBD tuning, so will be ideal for this process, please mail us at [e-mail] for any help, and you can see more here on the Alientech kess3 viezu.com/alientech-kess3/

[@santiagojaramillo3012]

Hi. What if my car model does not appear in the car list? can I select by ECU model? Can you upload a video? Thanks!

[@ViezuTechnologies]

we will be very happy to help, please drop us a mail to [e-mail] with your cars make, model, engine and year of production please and we will do all we can to help

[@ChadWaltham]

Is Kess able to rewrite the vin to areplacement ECU in a 2007 CX7 Mazda?

[@ViezuTechnologies]

Hi, for full details on the functionality of the KESS3 and to get answers on specifics like your Mazda question, please drop us on email to [e-mail] and one of our team will be happy to help.

[@alagy]

I am a car tunet and i use HPTuners to tune customers vehicles. I am looking into getting another tool to do the cars which are not supported by them like BMWs. With the kess 2/3 can I pull the file and make a custom tune calibration? I can decide what i want to change each parameter individually instead of having an of shelf tune. I couldn't see a custom map suite and the only thing i found was just reading out the stock calibration and writing back again something calibrated by alientech

[@ViezuTechnologies]

Yes, the kess3 master version will do just this, the master will red an open file that you can then loading into an editing software, such as Alientech ECM or WinOls, we offer both tools, the editing software and training too, you can see the master file writing training courses here : www.remap101.co.uk/ or mail us at [e-mail] with any questions

[@FavouriteKalimukwa]

@@ViezuTechnologies

[@samsea9075]

Hi , for beginners to tuning my own car , dose i need kess3 or v2 is enough? What is the main deference between them ? The device came whith the software including? Or need to buy the software? Can download file tuning from any tuning sites and write them whith alientech software? Need to pay for every file or theres subscription? Thank you 😊

[@ViezuTechnologies]

Hi, we will be very happy to help! The KessV2 is not obsolete, the new tool combines both OBD & Bench/Boot protocols into one tool. We can send you some more information about becoming an approved dealer, a breakdown of the support, and information about the training we offer. As well as the free training and demonstration sessions, which can be in house or online too. We have quite a lot to share with you. Do you have an e-mail address I can send it to? can you send this to us on a PM, or mail us at [e-mail]. we look forward to speaking with you

[@alfredosuarezalonso9461]

Is compatible with chevy avalanche 5.3l v8, thanks..

[@brandonjohnson3176]

Will this be able to tune a 04 Mazda rx8 and do I have to buy a tune software or just the hardware and I can tune it myself for free

[@ViezuTechnologies]

The Kessv2 is no longer sold from new as it has been replaced by the Kess3. The Mazda RX-8 is available to read and dependant on the activation of the equipment depicts whether you can make amendments yourself or not. The slave versions read the ECU but the file produced is encoded and you would need to send to the master you are linked with to make the changes. A master version produces an open file and you can then use additional 3rd party tuning software to edit the file and make the necessary changes. If you would like to know more please get in contact at [e-mail] or call on [phone]. Oliver

[@THEMECHANIC0428]

can this tune for long tube high flow headers on 2010 tahoe 5.3?

[@ViezuTechnologies]

sure can

[@Mohamadhadi-b2w]

So I’m fairly new to this I really need some help. So my main goal is to be able to delete DTC codes permanently but I’m not sure if I’m heading the right direction. I currently have Winols and ordered a Kessv2 which will take sometime to arrive. I will be working mostly on Kia’s and Hyundai. Would this be the correct setup?

[@ViezuTechnologies]

Hi @user-gq1uu4nn8r thanks for your message, If you are looking to start remapping could you let me know what your experience level is with WinOLS? Have you looked at our training website yet www.remap101.co.uk .

[@PreciousSandayan]

this support my nissan cefiro a33? please response

[@ViezuTechnologies]

Hi Thanks for messaging us. The KessV2 has been superseded with Kess3. At this time your specific vehicle is not supported for tuning on the Alientech tuning tools, nor is it listed as supported on any of the other mainstream tuning tools that we offer such as Magic Flex, Autotuner and BFlash.

[@paulfeugaing1339]

Hi plse whère can i learn to remaping modify

[@ViezuTechnologies]

Hi Paul, we offer ready to use tuning files 7 days a week, but we also offer in class training to learn to write your own tuning files, and also online training available 24/7. You can see all our training courses here : www.remap101.co.uk/

[@marcusbarnes5929]

Is this generic flash tune? Are the tune files able to be edited on a dyno so they are custom to the mods on the individual vehicle?

[@ViezuTechnologies]

yes, we offer a life custom tuning file service, open 7 days a week, from 7am GMT. File are live written, so can be adjusted for driver requirements and modifications. And we also offer training online and in class where you can learn to write your own tuning files too - you can see more on that here www.remap101.co.uk

[@marcusbarnes5929]

@@ViezuTechnologies a tuner I know uses the Alien tech software to dyno tune the Ford ranger 3.2L, I just wanted to be sure and understand it's not a generic flash tune, a 1 for all approach. As I wanted to be sure its a specific tune for my modifications to suit .

[@wayned3137]

do you offer file modifications for DPF DEF EGR delete?

[@ViezuTechnologies]

Hi we are able to perform these modifications to files. There will be a disclaimer on any removals that effect the legality of the car on the road to state that this car is for off road use only.

[@hot-shotlabel3212]

For xmax 400 abs 2014?

[@gregroddis7861]

If I purchase a used Kess2, will I still be able to participate in the training classes? Also, would it be acceptable to purchase a used Kess2, and if so, what is the cost of the updated subscription?

[@ViezuTechnologies]

Hi KessV2 has now been upgraded to the kess3 - you can see all the prices and options here : viezu.com/alientech-kess3/

[@nikola23gr]

Yea what is the price for the subscription I am interested also? I see many sites on the web have it for sale from £540 to $650/$1259 with a laptop here in USA for a new. But what else will I need any subscription to be able to use it? If there is a software what’s the price. And do you guys modify the ecu’s? I mostly work on USA trucks like freightliner,piterbuild,kenworth,Volvo, hino,ud,Mitsubishi,izusu, I need it mostly for def,systems, sometimes for other things. I have been using a j2534 to read end write and the modifications are doing guys from Germany with a reasonable price €100 to €550 depends what the costumer wants!

[@ViezuTechnologies]

So that we can help you further, please can you provide me with your email address and or contact number and one of our sales team will be in touch. If you would prefer you can send these details over on email to [e-mail].

[@crisfher]

I wanna know to to wire or pin to the ECU🤷🏻‍♂️

[@ViezuTechnologies]

Hi @crisfher, we have training videos on how to use the tuning tools on our training site remap101.co.uk and for detailed instructions of a specific ECU inside of the KSuite software you have commented on above, you simply need to plug your Ktag tool into the software, select the matching ECU in the application list and you will be able to see the connection instructions. If you need information on the latest Kess3 tools, please contact us on [e-mail] and one of our team will be happy to help.

[@SimonRico16v]

Is it possible to get pops and bangs with this tool

[@ViezuTechnologies]

Hi, This is now the old version of the KESS, as it has been replaced last year with the new KESS3 combining OBD / BOOT / BENCH reading and writing methods all into one tool. Viezu can provide a huge range of tunes and solutions for our customers. If you want pops and bangs, or just factory style burbles on overrun then we are the team to speak to. Drop an email to [e-mail] and one of our team will be on hand to help with your tuning tool enquiry.

[@dsingh11]

So where can I get the maps from? To load onto the car

[@ViezuTechnologies]

We can provide files for you.

[@blochumotorsport4095]

Can I make my own map on this program? Or do I need something else to make tuned maps?

[@ViezuTechnologies]

Hi, the KESS tools are used to read and write files to the engine's ECU, you might be interested to know that there is actually a new version of this tool, the KESS3, which is more powerful, and can be set up to allow Bench, Boot, and OBD tuning from a single tool. In order to modify the files they will either need to be sent to a company to do this for you (a service we can provide) or you will need an editing tool like Alientech's ECM Titanium, or WinOLS. These tools will allow you to edit the ECU file, and make any modifications you wish. We actually offer a huge range of training sessions both in person or online for KESS, and for the ECM and WinOLS, some of our introductory courses are even available for free. We'd love to send you some more information about the tools we have available and the training courses we offer to help get you set up, so feel free to reply with the best email address to reach you on, or drop us an email to [e-mail]. All the best James

[@juraganecu]

can it be used for Japanese cars? Like Indonesia type car

[@ViezuTechnologies]

Yes, the Kess V2, has now been replaced by the Kess3, its got great coverage and is both OBD and Boot / Bench tuning on one tool, you can see more here viezu.com/alientech-kess3/

[@vrindersingh1495]

Can the kess v2 be used to program a second hand ecu into a car ?

[@ViezuTechnologies]

Yes it can, though the KessV2 has now been upgraded to the kess3, you can see more here : viezu.com/alientech-kess3/

[@emreyilmaz3353]

Kess yazılımı ücretlimi

[@paulfeugaing1339]

Can we dealet the fault code with kess2

[@ViezuTechnologies]

Yes, you can either send the file to us to remap for you, or we offer editing software and training so you can make your own tuning files - please mail us at [e-mail], and we will be happy to help

[@ipwnxdemonzz4223]

Why start you car at least 3 times after ?

[@ViezuTechnologies]

This is done to make sure that the checksum has been correctly properly and there are no starting issues. It's a standard practice for professional tuning companies to start the vehicle at least three times after writing to the ECU or TCU.

[@leerzeichen1910]

where to buy this device? thanks

[@ViezuTechnologies]

Hi Leezelchen, thanks for getting in touch, we can sell you these tuning tools, we even offer training courses, just head over to www.remap101.co.uk/product-category/professional-tuning-tools/

[@olandorobertson2510]

Good vid

[@ViezuTechnologies]

Thanks very much 😊

[@olandorobertson2510]

Can that tool change the air to fuel ratio? I need a tool that allows a tuner to instruct the ECM to run at say 17.7 new programming parameter.

[@roniebertbatayola7250]

how to order this tools

[@ViezuTechnologies]

I have just replied to your other comment. We no longer sell the Kessv2 or K-tag as this has been replaced by the Kess3 as it can do OBD and Bench/Boot.

[@yasoutherncousin]

Can this do afm/dod delete?

[@ViezuTechnologies]

I an sorry not really, its a great all round tuning tool, and can be used for DTC and many function delete applications, but not Dod

[@sinisakragulj104]

can you change VIN nummer with this?

[@ViezuTechnologies]

you mean ion teh ecu file? please drop us a mail to [e-mail] if you need any help or advice

[@michaelgunning347]

I think he means what he says

[@yannickkay5099]

I also think so right the car vin number on new or after market ECU

[@ryceeclaireparungao2339]

how much is the tuning tools?

[@ViezuTechnologies]

There a few options, the new Kess3 hardware starts at just £540, please mail us at [e-mail] if we can help with anything

[@FA1TLE]

Now that the Kess3 is out will there still be continued support for the Kessv2? I could not find the software download on any official websites.

[@ViezuTechnologies]

yes the kess2 is still supported, but there have been no updates for a year now, you can still use the tool fine though, if you need the software you can mail us at [e-mail] - or there are some string discounts still available to trade in the kess2 for an all new kess3

[@shounakc6778]

do you teach how to program ecu?

[@ViezuTechnologies]

We have training videos on how to use the tools that are free of charge and we provide training classes on how to write your own files as a master tuner. check out www.remap101.co.uk for more details or contact [e-mail]

[@bryvikk]

Wait a minute, I am waiting for him to start moving map tables and stuff, and all he did is download a map to it? I thought you could manually tune your vehicle with this tool

[@ViezuTechnologies]

The tool will upload or download a file from the car, you edit it in additional software, such as Alientech ECM, we can help with this too if you need, please mail us at [e-mail] and we will be happy to help

[@alekseysmirnov9517]

NEW Kess 3.

[@ViezuTechnologies]

HI, we will be happy to help, yes we also have teh new kess3 tuning tool training and support too - you can see more on the kess3 tuning tool here : viezu.com/alientech-kess3/

[@stefanmarkovic8180]

do you run on win 7?

[@ViezuTechnologies]

Yes it will run on windows 7, you may also like to know the Kess V2, has now been replaced by the Kess3, its got great coverage and is both OBD and Boot / Bench tuning on one tool, you can see more here viezu.com/alientech-kess3/

[@neonlam93]

Don't really understand between this and ecm titanium. I wanna edit those map, have some fun. What tool or program or should I buy?

[@ViezuTechnologies]

Fully understand and happy to help, this video was really to learn to use teh KessV2, it was not how to write tuning files. The kess V2 has now been replaced with the Kess 3, you can see more on that here : viezu.com/alientech-kess3/ This will enable you to remove the stock software from the ecu, once you have it, this is where you will use the ECM software to make the changes and carry out the tune - we offer ready to use tuning file, but also full training on how to write your own. Including some initial free training courses, you can see these here : www.remap101.co.uk/. Please mail us at [e-mail] if we can help any further

[@canlikanli2850]

thank

[@ViezuTechnologies]

You may like to see more on the new Kess3 - you can see this here : viezu.com/alientech-kess3/

[@justmemyselfandi5532]

all that just to be a remote dummy person.

[@ViezuTechnologies]

Not al all, the Kess tuning tools come in a dealer version, but also a master version where you can write your own software, so you have choices - you can see more here : viezu.com/alientech-kess3/