Vijeo Designer Tutorial #2 (Magelis HMI) Creating Pushbuttons that control Indicator Lights

[@donnyj6535]

Hi Pete, I am going through your tutortial to get to know Meaglis HMIGTO6310 with Vijeo 6.2. Excellent skill you have how to show prog. methods. I am following your instructions to program the HMI and proud to say I do all of them on my HMI without refering to videos. By the way Vijeo 6.2 there is a title on the tool bar to Arrange push buttons etc. vertically or horizontally . Many thanks for your effort.

[@wouter3323]

if you want to go to the system config by pushing both corners you need to push 1 corner, relaese it and then push the other corner. and that fast after eachother. If you push them both at the same time it doesn't work. And sometimes the HMI doesn't react so if you have trouble opening the configurations that way its best to push the corners a couple of times fast after each other.

[@PeteVree]

Ok. Excellent. Thank you Wouter

[@bassistemre]

Is there any diffrences between XBTGC HMI controllers with touchscreens. I mean, can i communicate hmi controllers with plcs like pushing a button on hmi screen and activate an output on plc ?

[@elflacotarimas]

Hello friend, I have a question. I have a XBTGT2330 hmi screen with runtime 4.4 and the manufacturer of the machine sent me the files to make a usb pendrive and update to 6.2. He gave me the steps but it happens that the screen does not recognize the pendrive and I tried it on a new hmi and if it worked can you tell me why this is..

[@RobsRobotChannel]

As well as being a great guide, you were funny too. SweetSoulSister! And talking slow at 0.75x speed. Very funny, my dude!

[@mikewalker3300]

Someone accidently hit factory reset on our control panel we lost qll of our runt times for the oven we use is ot for is there a way to retrieve those said time?

[@4ntorsha]

HELLO ESTIMATED, I HAVE PROBLEMS WITH AN HMI SCHNEIDER STU655 DOES NOT SIGN THE USB-B OR ETHERNET SIGNAL AT THE TIME OF PROGRAMMING WILL NOT HAVE A PROCEDURE MANUAL AS TO CONFIGURE IT AND THE VIJEO DESIGNER SOFTWARE 6.2

[@lotfihassani6720]

Hi when i try to send what the work i did on vijeo to thé Hmi it say's Transfer failed bcs of à connections error, is it bcs of thé driver or câble or maybe bcs i didnt find my hmi version when i started New project so i worked with another version on vijeo ? Mine is HMISTO 715 But i dont see it anywhere when i choose New project and im using vijeo designer 6.2

[@ArunKumar-sg6jf]

what cost you buyed vijeo designer software

[@aleonyohan6745]

Is there a different HMI screen that is actually visible in a outdoor situation. I get constant complaints on our chillers that our customer cannot read the HMI screen when the sun is shining on it. I hold my cell phone up to the screen on full brightness and it's 100% more clear and defined then the HMI screen. The customer has paid $150,000 for this chiller but struggles to adjust any parameters in the daylight. I love Snyder controls but the HMI screen is ridiculously low grade visibility. Customers would pay an additional $400 for a screen they could actually read

[@PeteVree]

There seems to be a number of vendors stating that their HMIs are good for outdoor situations, but I couldn't recommend one. They must exist because sailboats use HMIs for all navigation chart plotters in the same environment. I would say the best way to ensure visibility is to incorporate some sort of shroud to reduce glare.

[@mikeskiles4660]

Does anyone know where to purchase a copy of Switch2Vijeo for converting old Magellis HMI files to Vijeo Designer?

[@RobsRobotChannel]

10/10 video, great work

[@pranavraju6845]

Hi sir Could you please explain how to download the old configuration from the controller . because I need to replace the old one with new . XBTR410

[@algeredjelfa5046]

Hi, I need the HMIS5T firmware update, please, help me

[@Theater1TV]

Thanks for the video, Excellent...

[@RS_83]

It is very sad that Twido PLCs are obsolete. Maybe it makes sense to learn SoMachine of Unity Pro software, instead of TwidoSuite? Thank you, Pete! It was very informative and easy. I did it in simulation mode.

[@vreepeter]

Soslan Revazov I'm moving on to Allen Bradley and Siemens... still waiting on Schneider for an answer on how to transfer the analog signal to the Magelis HMI

[@RS_83]

Yeah, in my opinion it's better to learn Siemens and AB products. Unfortunately in Russia Allen-Bradley is not so popular, like in North America. Siemens PLCs are more common here. Mainly S7-300 and even discontinued S7-200 series. Thanks for lessons, Pete!

[@pravingamot87]

Can i programming by vijeo citect

[@salimanonymous3975]

Can i have the activation code for vjd 6.2 ? Please.

[@PeteVree]

Can I have the PIN for your bank account? Please.

[@salimanonymous3975]

@@PeteVree 😂😂😂😂 thank you.

[@salimuallyjumamohamed7092]

Thank you very much for the good video

[@cristianyesidpachonhernand624]

Hi, I need the software, please, help me !

[@PeteVree]

The software is available for purchase through the Schneider at the following link: www.schneider-electric.ca/en/product/VJDSNDTGSV62M/vijeo-designer-6.2%2C-hmi-configuration-software-single-license/?range=1054-vijeo-designer&node=166533890-software

[@armandopalacios5874]

@@PeteVree hi im trying to down load the program from my original hmis5t and download it to the new hmis5t so my question for you is which software is the one i need for this application please and thank you.

[@bsmittal2010]

Your video is good, like it

[@paulfreed6394]

Thanks for sharing!

[@benhajsalahbilel9085]

Hello , I am a student and I have a question for you regarding a HMISCUxA5 PLC Do you have an e-mail please ! Thanks

[@jorgesalasnunez6104]

thanks

[@yulithifi]

gracias :D funciona :D

[@KFCMasa]

hello Pete Vree . please can contact you via email or any social media