Hey everyone! There’s some build info in the description as I think I forgot to mention the handlebar etc 😅 Sorry about the audio levels in parts of the video, still figuring things out 🙈 I normally just do voiceover, but might do some “in front of the camera” chatting if I get a microphone or something to help that. Thanks heaps for checking the video out 🤙 Thanks!
@thedford10 ай бұрын
audio was fine. the only thing that cought me was the noise from that rear sus, and that poor flange.. maybe some chain slap too, but thats ok really.
@oliverranawake973710 ай бұрын
Hey! Can you do a custom build for me?
@thedford10 ай бұрын
looking forward to the elevated stay! i wish there was more of those around.
@toastyrides10 ай бұрын
Me too! Really like them, beautiful frames 👌 wish so too, I have a couple friends with them though 😁
@glennpettersson900210 ай бұрын
That's a gem of a bike and a great build, I hope you get miles of smiles from it 👍
@toastyrides10 ай бұрын
Thank you! Will do as soon as the rear wheel is rebuilt, plan on getting a lot of decent trail rides in it over summer 👍 thanks for checking it out
@corrado907610 ай бұрын
For the rust in the Seatpost spot,try a die grinder tool with a wire wheel attachment, next time works good since you can control the rpm, Thanks for the vid brother!
@toastyrides10 ай бұрын
Thank you! Someone else mentioned a die grinder too, with a different attachment 👍 thanks for checking it out! 🤙
@iliketoridebikes10 ай бұрын
If you have an air compressor, a Needle Scaler is a great tool for dealing with rust in hard tor each places!
@toastyrides10 ай бұрын
Good tip! Haven’t heard of people using them on bike frames, haven’t had any issues with using it on bikes?
@jasonstella7410 ай бұрын
Those hubs are know to explode… Luckily you didn’t get hurt… Great video like usual…
@toastyrides10 ай бұрын
Haha yep all the nicer 90’s parts are at that point, read about lots of TNT/Ringle/Nukepreof failures. Don’t see why the lighter/higher end parts fetch the big $$ if people know they’re going to die 🥴 like the expensive Kooka cranks that are prone to cracking 😣
@jamesdarge10 ай бұрын
Oh man! The Alien! ❤
@toastyrides10 ай бұрын
Really looking forward to riding that! 😍 stoked to get it, Michel sent it up from Nelson. Had to jump on it 👌💓
@johnnywangcycles641010 ай бұрын
Awesome video mate, so excited to see a new built up…laugh out loud moment with the footage of that hub disintegrating 😂 some amazing projects, really looking forward to those videos😊
@toastyrides10 ай бұрын
Haha wish the slow-mo picked up that tiny piece flying off 😆 but the noise of it snapping off is great haha. Thanks for checking it out and will see you in the next one soon 😄
@senorspiegel10 ай бұрын
Awesome to see the hub break! Nice build!
@toastyrides10 ай бұрын
Haha had to put it in there 🫡 thank you and thanks for checking the video out
@speedikat682210 ай бұрын
Back in the day, that frame was one of my wants. Glad you were able to give it another life. Also, your trails look killer!!
@toastyrides10 ай бұрын
Stoked to have one! Would be cool for you to find one now though, keep an eye out just in case 😎👍 thanks for stopping by. Yeah I love these trails! Really nice network with a good range, lots of old trails for these old rigs too. Really fun riding them Cheers 🤙
@maxsteinbeezly79048 ай бұрын
What trails are these? They are on my bucket list now!@@toastyrides
@andypicken784810 ай бұрын
Nice looking bike that. I had no idea that Specialized were making full suspension bikes so early. Hydraulic rim brakes ! Thanks for posting. Andy
@andypicken784810 ай бұрын
PS I do miss the jingley music that was played during the fial assembly
@toastyrides10 ай бұрын
Thank you! Yeah they had a pretty good idea what they were doing, as it turns out. The hydraulic rim brakes feel really good 👌 require a little less power input than canti’s, but more than discs. Haha yeah sorry about the music, too many copyright strikes (which is done by KZbin’s auto system that’s overly sensitive) so I don’t get to put music on every video now. I’m doing tests with KZbin’s royalty free music though so hopefully get that down at some point 🤞
@travisbrooks86618 ай бұрын
I have a bike just like this that is in excellent shape and I only ride it in the city park. Cause I have a new stumpy for the trails. 🤠👍
@cjvilleneuve156610 ай бұрын
What a frame !!!
@toastyrides10 ай бұрын
It’s so cool eh! Awesome colour too 😍
@chrisleech3338 ай бұрын
I got the Team S works version and made a Jason McRoy replica with mine.
@toastyrides8 ай бұрын
Nice! Beautiful bikes the Team Sworks, nice tribute to make 🫡
@brendonoid613310 ай бұрын
I really appreciate your content, thanks for the effort. ❤
@toastyrides10 ай бұрын
Thanks for the kind words! And for checking the video out 🙌💓 have a great day 😄
@slideman.9 ай бұрын
good video. you can get online brackets that fit into the brazed cable guides and which hold the hydr. hose in place. in parallel to the cable guide. I use them and they're great. thanks for the video!
@milyvean10 ай бұрын
Awesome build! ✨ Really excited about the CADEX! big fan of those, my fixed gear cadex with horizontal dropouts is insanely fun!
@toastyrides10 ай бұрын
Thank you! Oooh cool, fixed gear cadex would be awesome 👌 where did you get the dropouts or did you make them? Would love some for mine, think it’ll be SA 👍
@milyvean10 ай бұрын
@@toastyrides I sent you the link to the files for the dropouts via instagram!
@toastyrides10 ай бұрын
@@milyvean awesome thank you! I’ll check it out 😄🤙
@INTERNETRACECAR10 ай бұрын
got me thinking about snagging my dad's old FSR and doing it up like this, the sunrise bar would fix his only complaint about it and get him riding again
@toastyrides10 ай бұрын
That would be an awesome project! The sunrise bar definitely helps bring the riding position up, quite a comfy bar with a little bit of backsweep (that isn’t an unnerving amount to those who don’t like backsweep, either). Lovely bikes the old FSR’s, really fun 👍
@cjvilleneuve156610 ай бұрын
That place look like jurasic park,,i tought you would be joined by some velociraptor.
@toastyrides10 ай бұрын
Haha it does have that feel to it, nothing to snatch us away here though 🥳😆 beautiful old forests this one 👌
@samblenkharn80998 ай бұрын
Sweet ride. Top job on that LX rear mech.
@donttouchthisatall10 ай бұрын
Excellent vid as always!
@toastyrides10 ай бұрын
Thank you! 🤙
@viviennepatterson595010 ай бұрын
Great video. Learned some new tricks which is good.
@toastyrides10 ай бұрын
Thanks! Oh cool, glad you picked up some new things! Cheers for checking it out 👍
@Dexter000008 ай бұрын
Great bike ❤️
@farizfaizal24986 ай бұрын
Sepeda yang fantastis dan kalcer abis bro
@MonkeyShred10 ай бұрын
I mean, that must be a strong wheel build if it survives that well with a third of the flange missing 😂
@toastyrides10 ай бұрын
Haha would have thought the buckle would be bigger to be honest 😂 lots of e-bikes rolling around with broken spokes though, don’t see them break hub flanges though 😵💫
@EriebyCycle10 ай бұрын
I thought the sound of the shock was parachute pants, or some kind of nylon rubbing together… like a windbreaker when you’re running. Cool bike. Cool video.
@toastyrides10 ай бұрын
Haha it does sound like it 😆 heard the chain slap a lot more in person than the squeak, but the GoPro picks up weird noises more 🤷♂️ Thanks for checking it out mate! Have a great day 🤙
@noelsmith185210 ай бұрын
Awesome build. Those maguras really take me back..
@toastyrides10 ай бұрын
Thanks, how did you like them? Apparently they’re quite aggressive on rims, but will be interesting to hear from people using Koolstop salmons pads (as they’re nicer on rims with other brakes, too).
@noelsmith185210 ай бұрын
Had them paired with ceramic coated Crossmax rims. Quite a combo.
@toastyrides10 ай бұрын
@@noelsmith1852that sounds awesome, love Crossmax’s
@byejason10 ай бұрын
Looked like a nice day in Vegas
@ferdinandmelchor424210 ай бұрын
sweet build!😍
@bikingviking668810 ай бұрын
Nice rim tape hack 👌
@nicholasdavidson568310 ай бұрын
Another toasty rides video :)
@toastyrides10 ай бұрын
Thanks for stopping by 😄🤙
@dylanwang345210 ай бұрын
New challenge
@toastyrides10 ай бұрын
Challenge accepted Parts broken Fun was had 👌 Will get it rebuilt and try to wrangle it some more, a dropper post would really help it on trails 😅 I suck at riding with the seatpost up all the time
@ashpunting10 ай бұрын
Where did you find this gem full suspension dream build? I love the colours you chose it's brilliant 👏🏽
@toastyrides10 ай бұрын
Just found it on Trademe, our local auction site. Was in my city, just got lucky and offered the seller a fair price. Thanks! Happened to have a green chainring around and the brown parts suited it so well too 😍
@DopeEd10 ай бұрын
who doesnt like a stumpjumper?!
@toastyrides10 ай бұрын
Crazy people 🥴 haha, love em. Didn’t know how it would ride but surprisingly stoked with it!
@kins8884 ай бұрын
Nice build - how about a Ging?
@Marcothefirstman10 ай бұрын
Ok bike look is very good. Only one thing: uniposca is not good for paint metal part, you can use Edding paint marker for better works.
@toastyrides10 ай бұрын
Thanks for the tip! Yeah it’s just what I had around haha, they work well on painted things though. Will pick some up 😄🤙
@trouble732010 ай бұрын
Cool. I wanna see some old roadie repair😅
@toastyrides10 ай бұрын
Oo I have a couple road projects! Just didn’t show them as they’re hanging up so a bit harder to show off 😅 a Raleigh dynatech (ti & chromoly frame), a Trek 1220 and a couple steel frames too. 😎👍 I want to do the Trek soon!
@trouble732010 ай бұрын
@@toastyrides ahh, it'll be beautiful, thanks you) I made fixie from low price roadie recently "hvz" and that something else, I wanna say)) it's big pleasure ride it. heavy, but that simpleness and comfortability make it best option for every day aesthetic ride ❤️❤️
@toastyrides10 ай бұрын
@@trouble7320 ooh a love a fixie conversion! So simple and beautiful looking bikes 👌 will have to do a Singlespeed one soon I think 😄🤙
@trouble732010 ай бұрын
@@toastyrides great, wish you luck 👍👍👍👍👍🔥🔥
@yzhang764710 ай бұрын
where can i find this kind of treasure
@toastyrides10 ай бұрын
Keep an eye out, you’ll find it 😎 🤞good luck!
@b.online10 ай бұрын
Awesome rebuild, such a cool bike! What kind of grease do you use?
@toastyrides10 ай бұрын
Thank you and thanks for checking the build out! I use Penrite wheel bearing grease, from Supercheap auto. But there are other wheel bearing greases that would be suitable too, Gulf Western wheel bearing grease I know is the same viscosity and works great.
@SquaredCircle77710 ай бұрын
What stem and bars are these?
@toastyrides10 ай бұрын
Hey! This is a Wethepeople supreme bmx stem, with a Surly Sunrise handlebar 👍
@brentmonastra932910 ай бұрын
Hi there, love your channel. I am in Auckland and am looking for a really nice rigid 26 inch 1 1/8 fork with V brake mounts. I am restoring a 1996 Bianchi mtb. Do you know of anyone that has a nice fork to sell. I am not on facebook
@TheMrtylerita10 ай бұрын
what kind of allen keys are those?
@joggingkuo10 ай бұрын
where is this trail?
@techjunkie68smusicandtech5610 ай бұрын
what handlebars and stem combo is that you have fitted?
@toastyrides10 ай бұрын
Hey, using a WeThePeople Supreme bmx stem and Surly Sunrise handlebars 👍 really like them
@sisdavid11 күн бұрын
Where did you get the handlebars?
@toastyrides10 күн бұрын
These are surly sunrise bars, bought locally 👌
@nicholasdavidson568310 ай бұрын
audio double over at 12.22 :p
@toastyrides10 ай бұрын
😆
@oreocarlton334310 ай бұрын
yikes at that RD cable shortness!
@toastyrides10 ай бұрын
Thanks for checking the video out! Feel free to put more comments down 😄🤙
@oreocarlton334310 ай бұрын
@@toastyrides I have to roast you somehow, great build, keep up the great work!
@toastyrides10 ай бұрын
@@oreocarlton3343 haha yep fair, thank you! see you in the next one 😄🤙