If you put a piece of painter’s tape in the canter of each vertical measuring sticks I bet that would be a pretty good reference point for horizontal sticker alignment as well. Thank you for your amazing pointers!!!
@TammyJewelry5 жыл бұрын
Wow ,,excellent tip,, I struggle with centering vinyl on balloons.. thank you for sharing this ..
@Balloonpro4 жыл бұрын
My absolute pleasure! Thanks for watching.
@kwlist71752 жыл бұрын
thanks for sharing this great video! what printer did you use for the decal?
@Balloonpro2 жыл бұрын
Hey! My pleasure. I have used a few different types of machines over the years. For this video it was the KNK Zing.
@Falzah2 жыл бұрын
Amazing. Can u guide what company vinyl for Balloons is better. And do u use permanent or removable vinyl
@MINI_TRYQWZ3 жыл бұрын
Hey can the permanent vinyl be used or it's a special type vinyl that is being used on latex and Bobo balloons?
@tararobson76802 жыл бұрын
Hi Chris, great vid! Just wondering, what did you call the thing you are securing the balloon with? Do you purchase it somewhere or make it yourself?
@Balloonpro2 жыл бұрын
Hi Tara. It's called a 'slide n size', most quality balloon distributors will offer it
@tonka2shoes04057 жыл бұрын
Oh my goodness. Can you please tell me how hard the machine is to use? I am so, SO happy to have found your video. Any help/advice you can give me would be so very much appreciated! I want this bad. Can you also tell me where you buy your vinyl and the transfer tape you use. Thanks again
@ambershore48433 жыл бұрын
Hi Chris, what are you using to hold the balloon down whilst you apply the vinyl?
@chrisadamo73 жыл бұрын
Hey Amber! This is called a 'size n slide', its for measuring balloon widths
@loriarias9176 жыл бұрын
Hi Chris, do you ever use balloon shine on your balloons? Can we use balloon shine on a balloon and then apply vinyl? Thank you so much for your very helpful tutorials. God bless!
@Balloonpro5 жыл бұрын
Hi Lori I do use balloon shine if they require it. I certainly wouldn't use balloon shine before applying vinyl... it will reduce the ability to stick
@Volunteerballoons8 жыл бұрын
Thank you for sharing - learning good tips from you!
@Balloonpro8 жыл бұрын
Our pleasure! thanks for the feedback.
@dfrancachela7 жыл бұрын
Hi Chris, I have been inflating some balloons using the vinyl and the Hi float, but I´m having some issues that I hope you can help me with: 1. With clear balloons the hi float leaves little bubbles so it doesn´t look smoth and completely clear, how can I fix that? 2. When applying the vinyl it looks nice but after a couple of hours starts to came off and have wrinkles on the vinyl, like if the balloon is losing the helium even with the hi float. 3.what kind of vinyl do you use? do you use a special brand? 4. Clear bubble balloons from qualatex can be treated with hi float? 5. When I apply the tissue paper confetti after the hi float, the color from the paper start kinda transfer to the latex, do you leave it to dry for how long before apply the confetti? Thank you so much for any help you can provide. Diana.
@Balloonpro7 жыл бұрын
Hi Diana Hopefully I can help: 1. With clear balloons the hi float leaves little bubbles so it doesn´t look smoth and completely clear, how can I fix that? After a few days, especially in heat the hi-float will start to look cloudy but you say bubbles? Perhaps you are using too much hi-float, in Sydney Australia we use about half the recomended amount and still get the same result. Its a balancing act between making sure you use enough hi-float to be effective (properly coated) and not using too much so it clumps and looks messy. 2. When applying the vinyl it looks nice but after a couple of hours starts to came off and have wrinkles on the vinyl, like if the balloon is losing the helium even with the hi float. Try applying the vinyl after the hi-float has set and the balloon has made its first initial reduction. (say 4 to 5 hours). Vinyl can also be significantly affected by fluctuations in heat... so if its cold overnight, the balloon will shrink and the vinyl won't shrink at the same rate. When it heats up the next day, the balloon will expand back to its original position but the vinyl won't stretch at the same pace... bubbles will form. 3.what kind of vinyl do you use? do you use a special brand? We use 'Avery 500' found here (from our local supplier): www.gamart.com.au/Products/SignageFilm/Avery500MatteMonomericCalendered.aspx 4. Clear bubble balloons from qualatex can be treated with hi float? I have tried this but with not much luck. The hi-float cannot breathe through the deco bubble material like it would with latex (more porous), so it doesn't dry as fast. Also you don't need hi-float in a deco bubble for longevity.... I tried it so I can get confetti to stick, the problem I found was the neck of the bubble is so small that it was difficult to get confetti in quickly so it can be evenly distributed and neat. 5. When I apply the tissue paper confetti after the hi float, the color from the paper start kinda transfer to the latex, do you leave it to dry for how long before apply the confetti? I apply the confetti directly after the balloon has been inflated (using this: kzbin.info/www/bejne/aXScmIluYspkeck). The hi-float should stretch with the balloon and thin to a very small concentration by now. I think if the ink is running you are using too much hi-float, there is excess liquid. Good luck!
@abbiehorsman15484 жыл бұрын
Hi Chris, I made one of these large latex balloons with vinyl for my daughters birthday last week and I found that after about 24 hours or so the vinyl went a bit bubbly so had to shift it around . Is this normal ? I added a pump of ultra high float too . It also started to drop a bit but I did have a tassel garland on it . Many thanks 😊
@Balloonpro4 жыл бұрын
Hey! Unfortunately latex and vinyl is a tough combination. Latex starts shrinking so quickly. We guarantee only 12 hours with vinyl (after hi float). My advice would be to pre inflate with hi float and then let settle for 24 hours. This sets the high float and passes the initial larger helium loss
@abbiehorsman15484 жыл бұрын
Ahh that’s a good idea! Thanks so much . I will give that a go
@jasminegrullon79787 жыл бұрын
Hey there Chris! Awesome tutorial videos! Where do you get the vinyl stickers from? I have been looking around and can't seem to find them. My clients are looking to add "HAPPY BIRTHDAY NAME" to their balloons. Thank you for your help in advance.
@Balloonpro7 жыл бұрын
Hi Jasmine. Thankyou! We custom cut our vinyl using a cutter called: 'KNK Zing'
@breakingnews32797 жыл бұрын
Hi all, great video. I need some help please. I'm new to this and have done a few balloons with vinyl lettering, unfortunately sometimes the lettering starts to crease and peel away from the surface of the balloon. This is not due to the adhesive loosing its stickiness. I assume this is due to the balloon expanding and contracting due to ambient temperature changes and as the vinyl does not expand/ contract in the same manner its starts to peel away from the balloon. Have any of you experienced this? How do you deal with it any tips? Many thanks
@Balloonpro7 жыл бұрын
Hey! You are right, the most common cause of vinyl creases is the balloon is decreasing in surface area and the vinyl doesn't compress at the same rate. My only advice is to apply the vinyl on the day on location. Also hi-float your balloon in advance and let it sit for 24 hours before applying the vinyl. Chris
@victoriarobles59126 жыл бұрын
Are you using regular vinyl for lettering? Also, What kind of transfer are you using? Thank you for the tutorial, very helpful.
@Balloonpro6 жыл бұрын
Hi Victoria. Yes regular vinyl (the stuff we use is called 'Avery 500'). The transfer tape is medium tac clear.
@emmanuelyt98296 жыл бұрын
Hi! What type or brand i can use for balloons? where to ordered online??? i try some other vinyl and it pop the balloon. HELP PLEASE! thx,
@melissashannon46997 жыл бұрын
can u recommend where I can purchase the vinyl you are using with the machine please... I can't seem to find the write one to use with the k n kut machine. thank you 😀
@Balloonpro7 жыл бұрын
Hi Melissa. Sorry I may not be able to help with that question. In Australia we use the 'Avery 500 Monomeric' range, seen here: www.gamart.com.au/Avery500Gloss3yr/tabid/835/language/en-AU/Default.aspx. It will vary from country to country and brand to brand. Try calling some local printing companies for a list of wholesalers.
@reynarenee2 жыл бұрын
Hi Chris, where can I find that transfer tape?
@farshadmc27 жыл бұрын
Hi. Thanks for your video. how does this label produce? I mean this Vinyl layer..
@Balloonpro7 жыл бұрын
Hi Farshad. We pre-cut the vinyl using a machine called a 'Klic N Kut ZING'
@dananaz124 жыл бұрын
That’s so fly Chris . I’m seeing that especially laughing a new company lol 😂 or a grand opening 🥰
@Mr200901426 жыл бұрын
Hi can you do a tutorial to make a stand to hold the balloon like yours?
@cinister20047 жыл бұрын
How well does this hold up if the ballon is deflated then re-inflated?
@lariiac71677 жыл бұрын
Hi can you do a tutorial to make a stand to hold the balloon like yours? Awesome video
@Balloonpro7 жыл бұрын
hehehe, the stand is just a balloon 'slide n size' with a clamp on it. You can buy them from any Qualatex or other good balloon wholesaler :)
@deityjoyceracho96384 жыл бұрын
Hello. What type of vinyl are you using?
@Thoseguardboiz6 жыл бұрын
How many times have the balloons popped on you while taking off the transfer tape???
@Balloonpro5 жыл бұрын
Zero. Just make sure you use low or medium tac transfer tape
@claudiaenriquezcastillo81628 жыл бұрын
Thank you to share with us your great tips, Do you know, another uses to the Vinyl transfer you use? I can't find it, I'm from Mexico.
@Balloonpro8 жыл бұрын
Hi Claudia, thanks for the feedback! You can find some small videos on transferring to qualatex bubbles plus our tipto transfer onto flat (uninflated foils) on our youtube channel.
@claudiaenriquezcastillo81628 жыл бұрын
Balloons Online so thanksful to your answer!!!!
@irama69647 жыл бұрын
Gorgeous that job! I would love to work with you and your team balloons, even if it was volunteer work! I love balloons and all that! Too bad I'm so far away. I live in Brazil. Congrats on sharing the video!
@Balloonpro7 жыл бұрын
Hi Iram! Thanks for your kind words. Next time you are in Australia drop us a line :)
@irama69647 жыл бұрын
Balloons Online Thank you so much, guys! ;D
@sweetnessesj6 жыл бұрын
Hi! What vinyl machine cutter do you recommend for me to buy? I want to print on 36" balloons. Thanks
@Balloonpro6 жыл бұрын
Hi Janet. Unfortunately I haven't tested enough machines to be able to answer that question. We use the KNK Zing and its fantastic.
@sweetnessesj6 жыл бұрын
oh okay. Which one do you recommend for confetti balloons? Clear latex balloons or Bubble balloon? Will the Confetti stick if I use bubble balloon?
@Balloonpro6 жыл бұрын
Both work great. You can stick confetti to both using static, latex balloons can also use hi-float to help stick the confetti.
@mixinmagic59958 жыл бұрын
Thanks for this. Ive just purchased a Silhouette portrait that i will be using to make transfers for my large stuffing balloons. Cheers.Mick
@Mr200901426 жыл бұрын
I've bought Silhouette portrait too :D
@dananaz123 жыл бұрын
I’m sorry I love your tips . People scare me away from the vinyl on a balloon. Remarks as it’s too hard a pain to work with . Lol 😂so I haven’t tried it .
@ruthjjones7 жыл бұрын
Do you have any issues with the 3ft round or heart balloons shrinking after a while and therefore the vinyl coming loose, or does hi-float combat this?
@Balloonpro7 жыл бұрын
Hi Ruth That will happen, there is nothing you can do about it. Helium will escape from latex even with hi-float... the challenge is to determine exactly how long you want to guarantee the longevity to your client. In Sydney Australia we guarantee 3 days looking perfect.... it can last 2+ weeks but I don't want a customer calling me on the 13th day upset that it didn't last the full term
@ruthjjones7 жыл бұрын
I guess the environment the client puts the balloons in also effects it too. Good to know 3 days is your guarantee - thank you!
@Maryann831057 жыл бұрын
What kind of equipment do you use to make the Vinil letters?
@Balloonpro5 жыл бұрын
Hi Mariana. We use a KNK Zing
@CesareVesdani5 жыл бұрын
If you are not careful, you can pop the balloon.
@JakiJade7 жыл бұрын
thank you for sharing
@Balloonpro7 жыл бұрын
My pleasure :)
@ilinadhirah78307 жыл бұрын
hi there, ive been doing that on 36inch latex balloon but by time i peel off the sticker, the balloon explode :( but this didnt happen when i did to 12inch & 18inch latex balloon. -malaysia-
@Balloonpro7 жыл бұрын
Hi Ili All I can suggest is that you use a low tac tape and the very best quality balloons you can find. We only use Qualatex brand balloons.
@ezdis53177 жыл бұрын
ili nadhirah hi ili , can i have your email ? Im from malaysia too and got something to ask you . Thank you :)
@Balloonpro7 жыл бұрын
Yeah sure. Its chris@balloons.com.au
@terryw55005 жыл бұрын
What type of binyl what type of rramsfer tape
@MultiFresd5 жыл бұрын
Showww, não fica bolha no vinil?
@zuhz1956 жыл бұрын
what for paper is that paper with text?
@Balloonpro5 жыл бұрын
Hi Zuh. This is vinyl.
@daliaduran30727 жыл бұрын
Hello, when I tried to take off the transfer, the balloon popped, what can I do to avoid that?
@Balloonpro7 жыл бұрын
Hey Dalia. Use low tac transfer tape :)
@CADAEventos17 жыл бұрын
Boa tarde!!! Que máquina preciso para fazer esse tipo de adesivo??