Vinyl Wrap on Mini Cooper Mirrors Caps

Instructional video on how to vinyl wrap a mini cooper mirror caps.

[@KamilSmuga]

Great work!

[@aarongranger]

I didn't stretch quite as hard, but this technique did the first 2/3rs of my caps done very nicely. Thank you!

[@uniquecovering8095]

thanks for the help

[@x3cerwin]

You pulled that wrap like it was endless.

[@deathtotaxes]

3M - Many finished graphic constructions can be stretched up to 150% (i.e., a 10 inch [25 cm] piece of film can stretch to 15 inches [38 cm]) without primer or relief cuts and maintain lift resistance;

[@COBRACUSTOMS]

they use Avery

[@jarradmcdonald2895]

That's gonna fail 😅. Please, anyone watching, don't do this 😅. Should have pre stretched the vinyl, applied to the tip of the cone and then use heat to shrink the vinyl back to the edges. You want minimal tension on the edges while you can have tension in the centre. The technique down will give you the complete opposite result!

[@rahilshaik6872]

Yeah bro for sure 😂😂

[@E11evens]

You used the heat temp gauge when heating?? This isn't a true reading

[@COBRACUSTOMS]

I think the vinyl will turn back course the strach is to high

[@shelbyweinstein4223]

That's what happened to me after 2 1/2 days - It started peeling back over the edges.

[@CaptainSteen]

I thought you weren't supposed to stretch that much? Because the color underneath will come through and it will also make it weak. At least that is what most experts in other videos say.

[@COBRACUSTOMS]

you have to vinyl it in 2 parts

[@tylaferguson7078]

waaaay too much stretch... i give that a week absolute maximum....

[@braxtonbrown1333]

Coming from someone who has been installing wraps for years, This will 100% fail. Stretching vinyl that much will not last overtime. Also, if you are using color vinyl, you will see major discoloration.