Upgrading a VW Polo's air setup + Hidden Boot Display

[@thatguy_kai]

Sneaky boot display 👌🏼😁

[@Stancesociety6828]

Dope content my G love the polo🇩🇪🔥also building my Polo GT

[@iamozzy96]

Where did you purchase your air suspension ?

[@GERMANESE]

Airlux and Q beams

[@channin]

Hey I got a polo 6C, pretty much same setup with a bigger tank and 3p. Mine is already installed, I want to try and do a hidden boot build myself. What should I do first before disconnecting? Just drain the tank and then unplug the rest? If you can give me some advice on what to do before disconnecting would be great as I don't want to damage anything :D Good video though!

[@GERMANESE]

The main thing is make sure there is not pressure in the system, that’s the most dangerous part. A good way to get rid of the air would be to use the water trap if it has one to release the air. You can also just air out the front or rear and then disconnect that part of the system. When you try to air that part of the system up it will just release the air out of that now disconnected part.

[@channin]

@@GERMANESE perfect thanks. I need to install a water trap but have a release valve to remove the air from the tanker. Would you say it would be okay to just use that to remove the air from the tank down to 0 psi and then remove the connections? Because the bags will still have pressure in them but the tank itself will be 0 psi or would I need to air these out too? Thanks for the reply though appreciate it. I will try it once the weather gets better.

[@GERMANESE]

The safe way would be to air it out completely, so jack the car up and put it on jack stands then air it out

[@channin]

@@GERMANESE got ya, thanks for the advice 👍🏻

[@joshuajohn5746]

What switches did you use?

[@GERMANESE]

Just normal double rocker switches from Q beams in Cape Town

[@joshuajohn5746]

Thanks bro

[@hulk_6n_player]

What bags was installed in the car

[@GERMANESE]

Double bellows up front and sleeves in the back