VL & EARLY COMMODORE FRONT & REAR WINDOW SILL RUST REPAIRS COMPLETE HOW TO! PLUS THE GIVEAWAY WINNER

[@shaggy271073]

I love how you call it as it is Jake, "it's fucked ,it's dogshit" brutally honest straight to the point, love ya work.

[@danielryan1026]

There is some good KZbin channels out there, but I must say this is by far the best one yet. Never change bro keep on smashing it out the park like you do best!! Super proud of you

[@bccev770]

Spot on!

[@towking_]

Just shows how much goes into doing things the right way. Thanks legend!

[@wesleygoullet3909]

I’m another one to comment that 6:21 is so relatable 😂😂😂 that was the best

[@Exitwounds666]

You're a master craftman jake! 😁 Great job and amazing attention to detail in showing how it's all done. I'd definitely weld up the seams to prevent future water pooling causing rust in the seams. Plus a nice clean seamless look 👌This VL will turn out so nice when done 🤘😜 Proud of ya brother!

[@ozzylambo8793]

Learned more from 2 of your vl episodes then I ever learned in school & trade school put together.

[@JWOLDING]

Top job Jake. Yes, every VL I have owned over the past 20 years has had needed attention in those areas, no matter how clean or loved they are.

[@chrishall8142]

Having done a million of these I was swearing at you for the first 15 minutes because of how you cut the plenum off but then you put the old one back on and only used what you needed from the new panel 👍saves so much trial fitting .. put some blankets over your floor pan and boot areas all those sparks will be rust tomorrow .. great video 👍

[@JAStheACE]

Well done Jake, those Adelaide cars can have some good rust issues from top down, yet the floor can be near perfect.

[@TAVOTravsDIYGarage]

Nice work mate, done the same repairs on my VK 2 years ago.

[@ADayInTheLifeOfJames]

6:21 every word out of me, 30mins into working on my VL’s 😂 Another ripper vid Jake; loving the content mate 🎥 🔥

[@wesleygoullet3909]

So true, so relatable 😂😂

[@craighuggins7133]

One of your best videos so far, great content and entertainment.

[@benjohnson7170]

Nice one matey. This whole welding cars malarkey used to freak me out. As the years go by,it gets easier. And you make it look easy as.

[@nawkaz0151]

Not as bad as my dads car I love holdens but when seeing them like that it breaks my heart I would so love to restore my dads one but I don’t have the money but watching your video has made me want to restore it even more

[@WarrenArmstrong69]

Great work Jake, another very informative video. One of the coolest channels around that actually shows how to do repairs. Thanks for sharing your experience.

[@darylmelville3687]

Nice one Jake, are you gunna show us how to fix the speaker holes? My car failed a rwc cause the speaker holes were cut out in parcel shelf 😞

[@piffiiiiiiit]

The Homer scream at 8:08 😂😂😂

[@gogemi]

Legit count down the hours to the next video every week. Keep it up man, loving it!

[@6Doublesix]

So that's how it's done, thanks for the vid.

[@jasonmeier7512]

Awesome work mate I had a winner with my vl not much rust Awesome tricks for the vl or vk as the next project I wouldn't mind video with dash loom install

[@johnnym3387]

Great episode, really enjoyed it

[@nathanobrien6875]

Great stuff Jake! I’ll probably never own a VL but seeing how you work and go about things is gold.

[@adamtabbit]

Jake straight out your a sick C*** very knowledgeable taught me some tricks, good job brother!!!

[@wooooodsy1]

Got started on mine today, man you make it look easy lol

[@michaelharris3036]

Mate your eye for detail is incredible 🎉 doing fantastic how to vids bruv 💯🏅

[@rodneysutton783]

Thank u for explaining the rust panel that's what I been waiting for

[@mickholgate3347]

Good job Jake!

[@johnapps6119]

Another awesome video Jake, thanks for the good tips.

[@ashleygray3848]

Great video as always Jake. I love watching all your stuff. Some excellent tips for doing my car.

[@JT-152]

Far out Jake, is there anything ya can’t do? Haha fkn champion!!! 💯👑🙌🏽

[@67wogval]

Your channel is becoming really good mate, editing also is looking very professional, don't know how u do it as well as work on all the cars. Think the vl u painted yellow u should of kept 😂 had a much better body. But looks like your sorting it out 👌👍

[@jasonmeier7512]

Awesome job mate handy ideas

[@jakeyy_wakeyy7682]

Loving the channel mate.!

[@mj_aussie_coaster_travels8310]

People that complain about the cost and time of rust repairs or about panel shops not wanting to do rust repairs need to watch this video…

[@RagdollRacingInc]

Got a 50 cent rust spot on the rear window drivers side of our VL the only rust in the whole car I have a section from another VL to patch it cheers for the vid my only other problem is the fuse panel under the bonnet has cooked a fuse so changing that

[@burnoutkings183]

I joy you videos mate they help me lot with my build keep up the good work looking forward to the next hour video

[@stevenbullock9274]

Good work Jake learning heaps from you

[@gezalinko7437]

Sound all good on my end

[@benarnold7087]

Great vid as always man keep it up

[@BreakerBros689]

best video yet jake👌🤙👍

[@bigmuz_pilot]

Excellent vid, cheers man

[@WhiteD88]

Good old strategic whack always works wonders, keep doing you mate and keep up the good shit 👍 🍻

[@thecap3189]

Hey mate love the videos! Do you do any sort of repairs on other people's cars at the shop or just your own projects? Looking into a VL that needs front and rear window repairs and wondering what something like that would set me back? Cheers bloke

[@168Rob]

Great video. Thankyou

[@craiglee1274]

Great video, Jake. It's very informative. What is your mig wire preference .6/.8/.9 when welding cars

[@richardtravers2436]

Nice work, love the videos. 👍

[@nickbest573]

My vl definitely needs this. Good info tho

[@SHOCKcustoms]

Awesome! Thank you for the terrific vids and your hard work

[@honestpat7789]

With all the neat fab work in the boot, I’m surprised at all the rust.

[@holyhecka7476]

Can't get to much VL content brotha

[@rolandclemson8422]

Great video!

[@justinnovosel4783]

Awesome video as usual, keep em coming 🤙 mans got talent

[@drifterdrifter9558]

Was so scared of the kinger in behind the vl 😮

[@billyrapley7224]

Just casually watching this video for the 10th time waiting for a new episode to drop

[@Aussiepride88]

I'm getting this done this month on my vk front n rear windscreen how much u reckon to do this labour so I know a ball park n aunt getting rip off

[@andrewhilder5068]

You not worries about the hot grinding sparks melting into your engine and boot paint mate?

[@geolabz1507]

Funny enough i set my dash and ecu on fire today.... literally from welding the cowl. If only I'd watched this sooner

[@cpzmelbs]

Sweet vid. Pinchwelds on my vr are dissapearing before my eyes lol. I don't have the tools or knowledge or money to get it fixed and not aware of anyone making replacements like this It'd be nice if their quality across the range increased as well. Surely they can afford to refine the same janky shit they've been serving up for a few years now

[@capri440]

Absolute legend

[@jamescooke3058]

Quality work mate

[@vernonliddell3149]

Do you have plans to show the car at summer Nat or just skid/drive it. It all ways be a show I want to get to. I just noticed are you left handed

[@LS8585]

Nice work mate. Is that Venetian or cardinal red?

[@scott.t1714]

Nice work man

[@thef71]

Smart moves

[@Ricks408]

Fuck yeh man, those repair panel tips are nice! They'll come up solid and clean as. I'll be looking for a paint panel shop to check out my super clean survivor 78" TC gemi and 67" XR falcon paint and panel repairs in the coming year, ill have to look your shop up someday as your in my area, i should bring one of em to your next BBQ and Show day but that's not the time for that talk sometimes haha. Keep up the great content mate it's sick 👊

[@sik66]

Sweet!

[@martinanscombe5997]

Jake your a fkn legend bro awesome work mad content 👌love the channel 👍

[@jamesbenbow1984]

How much to do this to front and rear windows on a VH Jake? Cheers

[@andrewkirk8687]

10hrs in it so I’d say 1000-1200 plus materials.

[@_kc_was_here]

Did a cut with nothing removed, but hey, hilux

[@Rob_hsv]

You need to do a “manipulating” shirt with a rubber mallet logo😂😂😂😂😂 fk the technical shit

[@traviswilliams1360]

I can see this chanel thriving as the ol "Iron Empire " slowly goes to shit unfortunately..Keep these type of videos coming please.

[@kosmokramer8389]

Boom!

[@jameshohmann535]

Your a fkn weapon mate. Love your content

[@bccev770]

He reminds me of Kurtis from Cutting Edge Engineering, why because he doesn't f#%k around.

[@jamieanderson7856]

Is it just me or no sound ??

[@towking_]

Sound is working for me just fine.

[@SMW747]

No sound

[@towking_]

Working perfect for me

[@jamieanderson7856]

Yea na deffas no sound for me re loaded the vid 5 times now

[@towking_]

Working perfect for me

[@jamieanderson7856]

@towking4485 it just needed a 8th reload come right

[@spotto4l564]

☝️☝️☝️👌

[@craigm9722]

Well it's nothing new to know that the Rare Spares panels are shithouse...but the rest was informative & yay me lurned knew stuff bout stuff...nah good shit bro...interesting & I like how ya don't fuck around and dribble on

[@theskorpiqn3789]

Early commodores, bro battery trays that are actually a part of the frame and not removable 😆

[@quaide3847]

Is it just me or what. No sound only video

[@towking_]

Working perfect for me

[@RagdollRacingInc]

Rare Spares looks more like Who Cares Spares

[@bobmarshall3700]

Why must there always be some clown doing a burnout?