***HOW TO MAKE CUSTOM OFF ROAD METAL REAR BUMPER(home made)🥇🎆🎇

This is how you can make MITSUBISHI PAJERO 2 REAR BUMPER! IT'S build by very simple steps, only big wish and hard work- enjoy :-)

[@TravisHollandMoto]

This is a video about a guy who started building a bumper with an angle grinder and then 4 hours in decided it was time to buy a plasma cutter.

[@VRAF]

1 hour in, on 4th to buy new mitchubishi....

[@themanthelegend7048]

Still cheaper then buying a bumper these days.

[@WakinyanHota]

Whats up with all the blurred out squares and all? Its not like we care about your trunks and license plates. Pretty distracting. Thumbs down.

[@VRAF]

someone care!

[@WakinyanHota]

Sure as hell ain’t me!!!!

[@FabbinAdventures]

"looks cool" but I wouldn`t rely on that thin of metal for anything but looks, no recovery points or nothin. ive built a few bumpers so I know the work that goes into it. so congrats on tackling the project!

[@m.camacho8925]

Darrrrrrrrnnnnn.... if I only had those toys 😂🤣😂 great work man! That quality control inspection was superb!

[@waynejakamarra6403]

Been here more than 10 times already, this is the only best video on diy bumper builds, KEEP IT UP😁👍

[@SchnebsGarage]

Metalwork in Flip flops...yer a brave young man.

[@G513-y3o]

From one perfectionist to another I can tell you take pride! Beautiful fit, looks nice

[@jackmasse8227]

I love how he is sensoring any shots showing him wearing short and sandals now lol

[@MGRDiesel]

Jack Masse yeah bad idea. But great job

[@mrmohamedhafez3621]

I would like make bumper for kia rio 2017 can you

[@adventureswithaustin]

I love the shorts and sandals man. I work the same way!

[@eddyguerra3120]

That's pretty & fragile

[@quiquemorales6099]

Wow, what a nice fab, you sir are a genius, I wish I could do stuff like that, but I was always bad a measurements, that bumper is awesome, ai could see it painted in Olive Drab in a Jeep.

[@lukeshoot]

i really want to see how you do the mounting on that bumper

[@cruzortiz6191]

Welding ok chassis

[@cruzortiz6191]

All welded around thé chassis, when plastic bumper off

[@themanthelegend7048]

Now you need a dimple press.

[@esequiaslinares6838]

Is it posible to send the plans?

[@malandro2023]

Awesome build! Planning to build one for my mk1 Paj as well. What gauge is that?

[@themanthelegend7048]

Sandals. We all see them.

[@themanthelegend7048]

Should have cut holes for the lights then welded plates behind the bumpers so they'd sit flush.

[@raykeane9345]

It's a good job in fairness but looks a bit light to me??? 5mm or 6mm at least,maybe 4mm with an extra bend on each lip??? if it's for off roading,towing or mounting a winch definitely need heavier wall..... imo.... looks great tho,easy on the eye.....

[@irwinjimenez]

What brand of plasma cutter is that? Is it for 120v? How much is it?

[@VRAF]

Chinese brand!() Hero()....perfect for the money....

[@irwinjimenez]

@@VRAF voltage?

[@VRAF]

@@irwinjimenez 220v

[@peeyoobikhunter2312]

You might have a quality control person BUT I'm the safety officer and you'll have stop work because your footwear is unacceptable.thanks.

[@aboamaar2066]

May God bless you, a job that is grateful for you شغل متعوب عليه الله يبارك فيك .وإلى الامام ممتاز

[@ozzygtz635]

Really GOOD JOB Pajero!!👍🏾👍🏾👍🏾👍🏾👍🏾

[@coltinhinchley4313]

How long did it take you and what size of steel?

[@1993Revhead]

Besides the random squares showing up on screen it wasn't bad

[@traianpetrascu]

Hello !!!! can you tell us in which applications you design the bumper

[@randyanderson6110]

Do you keep your licence plate covered when driving too, it's not like noone sees it.

[@pasquariello72]

At 9.55 his licence plate is exposed. We found Wally

[@francisguchie1973]

nice job. Kindly tell me the thinkness off the steel plate in milimeters

[@michaeldose2041]

Bumper? I wouldn't want to do anything more than the gentlest of bumps with a tin foil bumper.

[@MGRDiesel]

Great job 👍🏻+ new subscriber

[@MTXai]

Can you please send me the dimensions and measures for this? Thank You

[@dcmedia9607]

Blurred tag on truck but left visible in back of jeep 😮😅😂

[@justinbrown927]

Awsome flip flops. Looks like me in my shop...

[@brucewmclaughlin9072]

So I need a plasma cutter , welder, press brake , grinder, or I just go out and buy one that fits my 4x4 . Why is it that DIY people always seem to be far better equipped?

[@VRAF]

grinder and welder......

[@capitaldd5840]

Great video. Thanks for sharing. I need a bender, and a plasma cutter. They'd save a ton of time.

[@MrAcuta73]

Less than a minute in and that bill of materials was amazing....SO little waste, and scrap was usable? WOW!!

[@exhaustfumes927]

Think you did a killer job . Not sure if that was your first time or not but came out great

[@evgenyrskrsk82]

Hello!! Tell me what kind of program in which the bumper is drawn ???

[@MrJeffy46]

Dude,you do nice metal work but please put some boots on.😬

[@RektBySocr8sqq]

What is that tin foil?

[@joecotto2755]

How to make metal bumper an a Chevy pickup truck

[@toyT100]

What's your set up? 2 inch body lift and tires?

[@mikeestrada5694]

Can I do this with a hacksaw and a hammer?

[@sunnyfrank5391]

amazing workmanship! very inspirational.

[@samuelclark4525]

I really want to try to make my own bumper with my everlast welder. That is cool man.

[@normhowes2975]

Very nice build. Had it been mine, I would have preferred a heavier gauge unit .

[@adventureescape1929]

1/8 inch steel bumper? Hope you never get hit.

[@Adam12SD]

Actually a lot of the aftermarket off road bumpers are made from 1/8 inch. With proper bracing and gusseting it is much stronger than the factory bumper. Usually only the mounting supports are from 1/4 inch.

[@jedclampett6466]

It appeared to be 12ga. which is even thinner.

[@glenking3337]

Shoulda planned the bumper to have lockable compartments for the handyman jack tow chain and jumper cables.

[@allee6096]

The doors will need a real good seal.. mine leaks with water and dirt.. I figured a top lid type would leak, but end doors aren't much different.. drain holes made it worse LoL

[@wasimsuburban]

Great, you are an artist 👍

[@electronsmove]

it looks like thin material, was it strong enough for off road and towing?

[@VRAF]

Absolutely yes it is very strong, but is heavy...

[@TheMrhick92]

Looks to be like 1/8th inch

[@VRAF]

3mm thick and it's enough

[@electronsmove]

Oh ok, that seems like it is similar to a new truck bumper. I was thinking it needed to be 5mm in the center and maybe 3mm for the outer portion. Maybe it needs to be thicker for a winch mount. Nice job, looks fun. I need to make one for my truck soon. Good use of sketchup too.

[@ChasWG]

Most commercial available bumpers are made from 3/16" thick steal and any winch mount areas are made from 1/4" plate. 1/8" is fine for a looks only bumper, but I would not ever put any shackle lugs on that bumper. 3mm or 1/8" sheet is not enough for real hardcore off-roading or recover work. The frame tie-ins on this bumper were all the same, thin, 1/8" material. As a reference, both front and rear frame tie-ins are made from 1/4" plate attached to the actual frame rails. And the shackle lugs are made from 1/2" welded to the 1/4' plate as well as the rest of the surrounding 3/16" body. That as a true, solid off-road bumper. Both my front a nd rear bumpers were "weld-your-own" kits that I had to make the bends and then weld it all together.

[@GypsyPaz]

great build, great video. but the end made me skip the like button out of spite. lol

[@VRAF]

Because you don't have one?

[@mexrabcabrailov361]

👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍

[@NoodlesR6]

I would just scuff it and clear coat it

[@victormoran9520]

Grande maquina Saludos desde chile bro ❤️ greatins from Chile

[@amermbitar1]

Excellent workmanship, hat off.

[@constantinomanga9178]

je peut avoir les dimensions s'il vous plait.

[@HeathersHusband8387]

How much would you charge to build that exact same rear bumper but for my 2000 Chevrolet S10 blazer???? Without led lights

[@andrewn8788]

Flip flops in the shop = Pro

[@rstell3]

Flip flops and shorts while cutting and welding had me cringing.

[@Mr67chev]

Yeah not really. Put on some real shoes and pants

[@Compound_B_Fabrication]

Aussies

[@MrAcuta73]

Sunburned myself enough with welders when I was young to never do that again. 3rd degree to my shins/ankles at one point. Really a bad idea... Then he was running PlasmArc..../cringe

[@ДмитрийВознесенский-м4э]

Возьмиор по ходу событий россиянин ... хоть и стыдится этого спрятавшись за текст на чужом языке )))) или я не прав ? стоящая рядом жига и характерное для россиян рукоблудство навели меня на такие мысли

[@wayneshannon4465]

This isn't the first time I'm here,

[@imagineer8059]

1.5mm sheet metal bumper? Wont that collapse if u bump it into a tree.

[@VRAF]

2mm...no it's very strong because of folding

[@witosarlaw]

Mantap ini...makasi bang infonya 😊🙏👍

[@soundboydesign1373]

Canada here...nice!

[@Андрей-ц6г6ш]

Ваз-2106 рядом стоит

[@kojakkojak6117]

We cannot sea . You cover the cam

[@advancednutritioninc908]

Great Build !! Excellent Workmanship!! It reminds me I need a plasma cutter - i have pretty much everything else but that! Liked !!

[@vitorvelososousa7753]

Muito bom você e artista meu amigo.

[@metaldesign6589]

Prze chuj, a japonkach spawa 😁😁😁😁 obetnie ci paluszki u nóg to se już nie pojeździsz😁😁😁

[@cyrusyip5053]

I want to buy this rear bumper for pajero v46 Can you selling to Hong Kong

[@quiquemorales6099]

Who the hell are the 125 people who gave this awesome video thumbs down? Maybe Einstein's relatives. What is wrong with people?

[@JordanVidela]

tienes los planos?

[@AnhTuanTran77477]

Hi ad, could please advise me the device you use to cut metal, it is impressive. I would like to buy one

[@VRAF]

It's a plasma cutter. You can choose what ever you like it's enough 50Aamps for these job.

[@AnhTuanTran77477]

Thank you very much indeed!

[@zackkasey]

Nice work! I subscribed. Always looking to see how people build stuff. Taking notes for when i build stuff. Keep it up. :)

[@lupita5988]

Very good job, Edgardo SW4 2006 Buenos Aires , Argentina.

[@themanthelegend7048]

Awesome.

[@ahmadfaridzafari61]

wow!! Weldone you made it super nice!

[@vovkaromankiv237]

Просто бомба , лайк

[@Pikulev_Evgeniy]

Удивительно, дрель в руки ни разу не взял.Все плазморезом прожог.Даже крепления для фонарей

[@StereoSonic.]

Home made? У всех, конечно, есть такой же инструмент дома))

[@rubenrosales3545]

eso es un trabajo cochino la chapa se pliega en forma artesanal es una cagada lo que ases

[@samuelclark4525]

Wow that was a lot of grinder cutting. If you ever need to do that again you should maybe buy an everlast plasma cutter or at least rent one.

[@AaronCook83]

Are you taking your pants off while plasma cutting?

[@MussaKZN]

Good effort man!! But the heavy breathing at the end is disturbing!!

[@angusmacgyver3713]

Excellent work !

[@Goofy948]

Nice work shoes

[@charlie2king]

Looks good but can U weld? Or clean the welds up nicely?

[@donniebaynard8430]

Fucking show off! Come build me one!

[@VRAF]

No problem😊

[@sonyujohonluis]

Tienes los planos ?

[@dddddd7638]

Very beautifull!!!

[@mgpo87]

Hi what kind of cutting and wielding equipment are you using?

[@kudabesi3683]

Use cardboard or paper to cover your plate number

[@quiquemorales6099]

Gosh if I had the money i would pay this gentleman to build me the perfect Bug out jeep like a Road warrior type jeep

[@rediskusuma983]

Ityutrenya kurang ass depan... Deskripnya mobuikytu...

[@rediskusuma983]

Treutyutinya kuytureqewrtyu...

[@psy06]

good build without any fancy tools !

[@MussaKZN]

psy06 plasma cutter Mig welder Auto helmet Home made break press(I like it a lot) Grinder Computer with a 3D graphics program Nar no fancy tools hear!! LOL but I do get your point!!!

[@itsabuscus1619]

Dang that’s pretty. Low profile, strong and just woaw.

[@pajeronvrsk8896]

Очень круто !

[@AnhTuanTran77477]

Make it with stainless steel then paint in black gelcoat,

[@tarascookie1537]

супер супер

[@RigOmelo]

Great work

[@MuzafarTarar]

Great stuff waiting for ur more videos

[@dashcamspotted887]

Do a video building that in fiber glass

[@roddy46198]

Something missing in the middle... No not a hitch, a winch would look nice!

[@VRAF]

the winch is set forward on front buper.