VLOG#4- HOW TO CONDUCT ANNUAL FIRE HOSE TEST | How to be Third Mate Series | Show and Tell Shawntel

Hello everyone! Welcome to another video on my #HowToBeAThirdMateSeries 👩‍✈️🤟
VLOG # 4 - HOW TO CONDUCT ANNUAL FIRE HOSE TEST
Requirements for Annual Testing and Maintenance can be found in MSC.1/Circ 1432. 7.1 Fire mains, fire pumps, hydrants, hoses and nozzles
✅ Visually inspect all accessible components for proper condition;
✅ Flow test all fire pumps for proper pressure and capacity. Test emergency fire pump with isolation valves closed;
✅ test all hydrant valves for proper operation;
✅pressure test a sample of fire hoses at the maximum fire main pressure, so that all fire hoses are tested within five years;
✅ verify all fire pump relief valves, if provided, are properly set;
✅ examine all filters/strainers to verify they are free of debris and contamination; and
✅ nozzle size/type correct, maintained and working.
Note ‼️
It is not necessary to test all fire hoses onboard annually. The regulation states that you can test random fire hoses annually, just make sure to test all of them within five years. However, I did test all fore hoses during my annual for my own assurance and for everyone's safety.
Risk Assessment should be done prior conducting this job because there are risks when you take out the fire hoses from it's stowing position. Just make sure to return the fire hoses immediately on the day, so mitigate the risk imposed.

[@robnotrug5537]

You do not need to test all your fire hoses at working pressure every year only 20% and make a record so all of them are tested in a 5 year rotation .

[@chikaminute4903]

This is a great help! Really! I’m freshly promoted third officer so I had random thoughts on what or how things should be done first since I’m about to board a newly takeover vessel and I overthink to much. Thank you and more power to you and to all of us! ❤️😊

[@artursequeiros]

Dear Showandtel, Congratulations! You inspire. I would be proud with a daughter like you. God bless you!

[@Isaacnaime]

Your doing a great job, and you have the guts to make a video of your work on onboard. Great stuff. Watching all the way from Papua New Guinea. 🇵🇬

[@evrenmetecanvural6850]

Just a little advice, please open hydrants cover from little bit near of hydrant not opposite of it with "fire hydrant spanner" for protection any injures. Couse it can maybe thrown by pressure inside if any. (at 3:28 minutes) Have a nice watch :)

[@grouptwocanopus3030]

Searching for gmdss tests procedures and i found myself clicking each of your informative videos. Congrats 2nd!hoping to be 2nd someday.Cheers!

[@AnishKumar-si5ef]

Best videos very helpful

[@msporiumpaws8697]

The fact that you teach in English, you earn a new subscriber. Waiting for more informative contents like this

[@gilxavieryburgos7323]

Very informative. Thank you Ma'am. 🥳

[@ferhatdoganolmez1423]

It will help a lot. Million thanks goes both of you ❤

[@seafarerarafat5979]

Informative tutorial 🤗 Keep it up Sir regarding 3rd mate related more videos 🙏 💞 from 🇧🇩

[@nestleiancastro2525]

First subcribe mam,,von voyage god bless us..

[@jmsarron6238]

Good job🇮🇩👍

[@fidelpopa1582]

Hi maam,sobrang laking tulong po ito and very useful ma'am,salamat po and god bless you always and always healthy.❤️👍🙂

[@chifranzvlog7139]

Wow how nice im a 3rd officer too that pressure test is one of the heaviest physical job, but seems u knw ur rhythm to smooth that color orange fire hose u knw it madam. 😁

[@thegamingeye6619]

As a finishing touch, its also good to apply air in the hoses to remove/drain water from those hoses faster :)

[@fikretcaferov]

Hi. Thank you for the helpful video. I have one question about the drying procedures of the fire horses. Usually, I dry them in unfolded condition and hang them through railings. Is it enough to dry fire hoses under the sun in a folded condition?

[@seafarer786]

💕💕💕💕

[@brixmicaller2155]

WOW! sobrang laking tulong sa amin lalo na sa mga aspiring third officers. Thank you so much maam! #qualitycontent

[@ShowandtellShawntel]

Thank you sir. Buti naman at may nakakaappreciate din. 😅😅

[@TanNguyen-qv3do]

best videos and very helpful. i hope u will come back early and i can study more from u

[@caballerofamtv6720]

My suggestion is to do it evry 3 mons per department..accom,deck,engine and cargo holds..pra hindi mabigat pgkuha sa lahat ng hoses sa buong barko..pero ang galing nyu

[@chevaughnparker2654]

Nicely done 👍🏾👏🏾

[@ShowandtellShawntel]

Thank you! Cheers!

[@Rohaannagore]

👌🏻👌🏻👌🏻👌🏻👌🏻 great

[@ShowandtellShawntel]

Thank you for the support 👍👩‍✈️

[@samclairelim]

Grabe ka power 😍😍😍 Supporting you 💯 percent! Very informative. Can you make a video of the different fire extinguishing agents you have onboard? Fixed or Portable 😊

[@ShowandtellShawntel]

Sure thing mamsh. I'll do that on my next monthly. ☺ Thank you so much for the support 👩‍✈️

[@boholmaster807]

nice video ma'am. pwd request kog unsaon pag stencil sa survival crafts nga dali ra. pati sa lifebouys. hehehe salamat daan ma'am. :D

[@Clean-Oceans]

Thank you ...

[@unitedwudee4275]

Nice one I like ur video, tnks a lot. Please I need u to do a video on how to do annual inspection and maintenance of FM 200 system.

[@ianjesusgomez5280]

good job !

[@ShowandtellShawntel]

Thanks!

[@ramanbharati2932]

Hi, pls show how to do fire isolation valve testing on the fire main line and how to repair should any leaks be detected . thanks.!!! take care.

[@cileonard14]

Hi ma'am! Your content was really helpful to aspiring officers. It was demonstrated very well, ma'am. Content suggestion: Binding a new fire hose to a coupling. It might be simple to some, but it would be of great help for starters and refreshers. 🙂

[@ShowandtellShawntel]

I've been thinking of doing this sir. Hopefully on my next vlog 😊 Thanks for the sub.

[@hd_punjabi_records9139]

🔥🔥

[@ShowandtellShawntel]

🥰🥰

[@blessinbernard4500]

Mission Accomplished 🔥💥

[@ShowandtellShawntel]

Thank you so much 👩‍✈️

[@hocineboukerma9182]

Thank you showandtell shawntel

[@ShowandtellShawntel]

Thanks

[@rarelysoares8143]

Great lesson 3rd. See u in Okada for cheers!! Kkkk

[@ShowandtellShawntel]

Hahahhahahaha, thank you sir 😊

[@gerardpaulsentillas3452]

Galing magEnglish ng partner na Maam! Thumbs up to that guy! NakaEnglish accent pa! Nice!

[@ShowandtellShawntel]

Hahahahahha, makakarating sa kanya ang comment na to sir 🤣🤣🤣

[@antonreluya4147]

Kakamiss 😭😤

[@irenetalorete8995]

God Bless you always nhak❤️

[@ShowandtellShawntel]

Thank you nay 😘

[@irenetalorete8995]

@@ShowandtellShawntel you're always welcome nhak😘

[@jasonjabonillo3151]

nc third. thanks for ur vids. newly promoted po ako na 4th off need ko tlga neto mga diskarte salmaat sa video nyo mam

[@ShowandtellShawntel]

Salamat sa pag.appreciate sir. 😊

[@huangjingshun91]

Fantastic sharing, you got yourself a subscriber. Please continue creating such content! How about an inspection for lifeboat?

[@ShowandtellShawntel]

Great suggestion! Will keep that in mind on my next vid.

[@jord_sanoofficial6982]

Subscribed already Maam!🙂👌

[@ShowandtellShawntel]

All the best

[@uskusk7144]

Hello! I have a few questions for you. 1. I found out in some different youtube channels instructing how to pressurize test the fire hose, they do "shut off" the stream through nozzle and check the water pressure through a gauge indicator. In your video, such action as shutting streaming off through the nozzle have not been carried out. What is the difference? Do fire hoses have to maintain full fire main pressure when nozzle shut off or not? 2. In my internship term, we had carried out pressure test of fire hoses by just linking the fire hoses to the fire hydrants and inspected if the hoses leaking. But we had not a pressure gauge somehere or a digital pressure indicator just as you have in this video. I think our test sucked. But do you think our test we made during my internship term could pass the pressurize test criteria or not? 3. As I mentioned before, they shut off nozzle and read the pressure through a gauge. And that sound kind of weird to me because where all of those pressurized water go when they shut off the nozzle? It must be very dangerous for the fire main system.

[@ironmatic1]

No, they don't. Hoses loose pressure when flowing water due to friction.

[@rishikesh5187]

Hello ma'am, Great Video content. Can you please make a video on how to change the gasket of the fire Hose. Thanks 🙌

[@safety_news]

Have a great day

[@joytuchowdhury778]

Beauty with Brain

[@kennechaldas2670]

♥️♥️♥️♥️♥️♥️♥️♥️

[@ShowandtellShawntel]

Thank you for the support 👍👩‍✈️

[@anadaanurak9129]

In my final shipping company SMS we had lifeboat drills and fire drills once a week, I was alone, had no helpers on all safety-related tests, checks, and works, all firehouses test every 3 months, and all fire extinguishers maintenance had the same timeline, other safety equipment much less time, every 3 months a complete record of that to master to sign, any mistake found, expect a verbal scolding by C/O, NEVER AGAIN BACK TO SEA, bridge paperwork, continues chore. lookout useless.

[@raynoldfelix1201]

Hello, is it written in the rules that we have to connect each fire hoses for the pressure test? or is it only to make it effective to be done one time, if its in the rule or circular could you share to me? Thankyou, appreciate the video

[@johnroberttan5953]

Ma'am, hindi po ba standard iniistencil or mark sa hose yung rated pressure at date ng hydrostatic test?

[@jhunieltionson2282]

Pogi mo sir Reluya hahahaha

[@antonreluya4147]

Pag sure lagi! Hahaha mas pogi mo 😁

[@reginalagujar5743]

Pa shout out next video lods! Godbless!!

[@ShowandtellShawntel]

haha, cge kuya sunod. 😅

[@sagarsharma8960]

what about fresh water rinsing from inside??

[@pallavisingh7531]

Pl make video of isc

[@jomarvillareal2031]

Hi maam, how about hydrostatic test of firehose po?

[@robertojoaquin941]

who will be the one po to change the gasket?

[@mainestate727]

G2 Ocean? Charterer namin yan.

[@anjunserencio2630]

Thank you maam hope maam sa lifeboat na pod maam

[@ShowandtellShawntel]

Noted sir, I'll do that on my next vid.

[@shivamkumargupta5027]

hi i have one dought like after testing all fire hose do we have to rinse with fresh water and how to test fire line

[@kevinantony7173]

Drain SW then rinse with fw then drain fw and finally dry it faster with air and secure

[@deynmal]

Grt job... I would like to sail with you..

[@davegamido1636]

Mam why emergency fire pump is not located in engine room?

[@linuxranch]

Testing at full main pressure should probably be done with the nozzle shut off. Otherwise it is less than full pressure. Do you really take ALL of the hoses at once? What if there is a fire during the test? I'd probably do 1/2 on one day, half the next.. and not take all of the hoses in a given area.

[@VinothKumar-hi9kz]

Have you did the pressure test of the hoses???

[@ShowandtellShawntel]

Yes sir. 😊

[@candelariaracel248]

maam ❤⚓

[@ShowandtellShawntel]

Thank you for the support 👍👩‍✈️

[@jammonelsomail5902]

Please send my regards to my junior

[@antonreluya4147]

Hi sir!!! Ngayon ko lang nakita! Hahaha Kamusta po sir? 3rd na rin po ako ngayon awa ng Dios

[@yowe7706]

Gud day po di po ba sya kelangan na picturan nyo while hydro test for evidence na nag test kau, just asking lng po ty.

[@ShowandtellShawntel]

Yes yes, dapat picturean para sa gagawin mong annual report, kelangan may documentation.

[@golflima3696]

Very good explanation thanks 3 rd off ! More woman at sea

[@jeepits7775]

maam ano po agency nyo

[@pinuelajumar1805]

Every 6 months ba yung fire hose test maam?

[@ShowandtellShawntel]

Annual po yun acc to solas, pero baka may specific yung company ninyo po to do it more frequent. Check nyo nalang po sa QMS 😊

[@pinuelajumar1805]

@@ShowandtellShawntel Thanks po Maam😁