Voltage Dividers

[@kingpixel]

I’ve known about voltage dividers forever, but this is the first time I’ve actually understood them. You have a very intuitive way of explaining things.

[@alkharusi1717]

You are the best Mr. Bob 👏👍

[@danielsau7599]

Great video as always!

[@mikiemark]

Awesome. Thanks Bob.

[@tinkerman5220]

That's definitely a different way of looking at the math. I have been practicing the actual formula, but I will try this method also. Thank you

[@loveyouamma7321]

Great video sir....Tq very much

[@Sctronic209]

Great video.

[@tokin420nchokin]

I have a resistor divider in a game gear that's not working. 5v in is present, ground is present but at the point it should be 2.5v its 5v. I took the resistors out of the circuit and they both measure their respective 10k resistance. I am a little stumped as to what could be the fault here. I notice if i measure the top resistor on the board it acts like a short. Under the resistor there is a trace that goes from the ground up, do you think I am somehow shorted there and its allowing all 5v to pass through? I am kind of stumped.

[@tokin420nchokin]

I fixed it! Your video really helped me visualize what should be happening. Turns out that I had a short on the capacitor that is on circuit. I assume thats why I had the 5v present, but no 2.5 at the other side, it didnt have the current? Does that sound correct or am I still misunderstanding what was causing this issue? Either way removing the capacitor and cleaning the pad resolved it!

[@JustFun-iz9rf]

Thank you

[@ionationat3570]

Thanks teacher.

[@aryan9296]

How to use VDR when one terminal is positive and the other is negative.

[@manojkumarchavda65]

Please show with the load

[@Carlos504-l4q]

thank you