Volkswagen Passat Error: ABS/stabilisation control (ESC)

Volkswagen Passat Error: ABS/stabilisation control (ESC)
Volkswagen
Passat
1.6 TDI CR BlueMotion
Engine code: CAYC
(3C2/3C5) (05-11)
77 kW (105hp) 4400 rpm
(2009-2011)
03841 left rear speed sensor, incorrect signal electrical problem in the circuit - intermittent
00290 abs wheel speed sensor, rear left - G46 not a plausible signal - intermittent
00290 abs wheel speed sensor - rear left - G46 malfunction - intermittent
00290 abs wheel speed sensor - rear left - G46 open circuit/short with power - was intermittent

[@kfitz]

Wow... great video! That is exactly what is happening to my passat... Thank you!

[@TallDudeSSj]

Great video! 👍

[@nickwillenbrink1606]

Also when removing old sensor I broke the head off the hex bolt. Not sure if that plays a role, also not sure how to get that out aside from penetrating oil and maybe a drill out.

[@MustangMotors]

Hi that's the way forward there are various methods to extract, you should try reverse drill bit extractor like this www.amazon.co.uk/Litensh-Extractors-Damaged-Extractor-Combination/dp/B08YPBT9MD/ref=sr_1_8?crid=7IYZ0APS1BUS&keywords=reverse+drill+bits&qid=1642280092&sprefix=reverse+drill%2Caps%2C52&sr=8-8

[@livinginthelie8409]

Did your multifunctional steering wheel stop working too?

[@1987tjscott]

I have this issue on my 61 plate cc, had it previously and have changed the sensor and its worked fine. However after changing the sensor twice I still have the issue shown. So changing the hub and bearings you think that'll fix it?

[@MustangMotors]

yes absolutely that's the way forward

[@dariuslucianstirbu4456]

Hello guys and thx for yout comments, but I was today to 2 different mechanics and 1 of them found the fault he replaced my new abs sensor with my old one and then he cleared all lights in the dashboard, but after I driven the car lights came back again,he advertised me to buy a genuine ATE ABS Sensor,he said that after market ones are not good at all so now I will order a new genuine ABS sensor and see if will fix my problem,will let you guys know.

[@1987tjscott]

@@MustangMotors I changed the bearing and that fixed it for me, the ring sensor had a part missing on the faulty part. Thanks for your help 👍

[@kaiminjsh2010]

Hello, i replaced a speed sersor on my passat 2013 and cleared the codes but straight away the faults codes come back ? Can you help please

[@MustangMotors]

Hi what fault codes did you get on obd2 scanner

[@VatruNaMatru]

I have the same problem with my passat b7 and today i changed the sensor but the lights go on when i start the motor. What else could i do? These are the fault codes: 03841 - RPM sensor rear left: incorrect signal - 012 - electrical fault in circuit - intermittent 00290 - ABS wheel speed sensor, rear left (G46) - 004 - no signal/communication - intermittent 00290 - ABS wheel speed sensor, rear left (G46) - 012 - electrical fault in circuit - intermittent

[@MustangMotors]

Hello try replacing the wheel bearing with ABS on rear left side of the vehicle

[@nickwillenbrink1606]

Hi I have a 2014 vw passat and have the same issue. My code is uo41500. Changed 2 brand new sensors. Ordered a new harness, pcm is under a year old and if the abs module was the problem I'd have more than one sensor issue. Last resort is this hub and bearing. I'm not sure if my year make and model have the ring that's been brought up a couple times which js why I didn't try the hub and bearing first. Any suggestion? Car seems to be running fine. No brake issues, or sliding issues or anything out of the ordinary. The vehicle has 65k miles. The code I get is invalid data from abs control module.

[@MustangMotors]

hi Nick did you manage to check the hub? If you haven't you should check that because there is high chance of dirt or debris on the magnetic pick up causing faults in ABS

[@Jojo-lf3dy]

I have vw passat. I just had my Sparkplugs changed. Im so confused. I feel like my bf tightened them way to much. I know I have a bad wheel bearing that needs to be changed. I just went to start my car and it clicks, wont start, all the dash lights come on and it says error: Stabilization control (esc). Help please

[@MustangMotors]

Hi there, It’s probably a battery or starter motor, have you tried jump starting your car.

[@Jojo-lf3dy]

@@MustangMotors I had it jump started and was able to move it someplace safe. My bf is a mechanic and said I need a new battery. He also wants to check the alternator...ugh one thing after another. Thanks

[@richyyLR]

Jill, what all ended up happening? I'm having the same issue on the same car. Thanks!

[@Jojo-lf3dy]

@@richyyLR well my battery died lol

[@Swavo23]

Hey did you ever find out what was the problem? My battery tests good.

[@crossrazr]

a mi me salieron los errores de abs, derrape y dirección durante 2 meses, era problema de la bobina.

[@dariuslucianstirbu4456]

Hi guys I have the same problem,I had already changed the ABS sensor and wheel bearing but the fault and all those light still On,error code is 01316 is saying ABS control unit,check fault codes,permanent this error code after 2 different mechanics said to replace ABS SENSOR AND WHEEL BEARING,if you can help me with this problem please,right here,thx

[@MustangMotors]

hi the fault code 01316 within ABS control module. Check your abs fuse, if not check the wiring to the abs pump and check the abs pump wiring harness I have seen few with electrical oxidation and bad connection. wiki.ross-tech.com/wiki/index.php/01316

[@travellman2502]

P00287,3842 ,I changed abs senser rear right but still the fault is there what happend pls help me,vehile is passat,voltage, continuity is ok

[@MustangMotors]

Hi have you checked the wheel hub bearing with the magnetic pick up. You need to check this for damage or dirt.

[@travellman2502]

@@MustangMotors I swaped the wheel hub but still the dtc not goes on

[@travellman2502]

Before I changed a abs sensor but it's not genuine.part,after i ordered a genuine parts today or tomorrow it will come,after change I will massage you ❤️

[@gauravchaudhary7779]

From where u r ?

[@MustangMotors]

United Kingdom

[@fabianpopa910]

Where you based ?

[@MustangMotors]

Folkestone, kent, England

[@fabianpopa910]

@@MustangMotors can I have you’re number and post code mate ? I’ve got the same problem after fixing exactly what you’ve just fixt

[@MustangMotors]

@@fabianpopa910 hi there did you scan the fault code? did you have the same side as mine. there are wheel speed sensors on each wheels.

[@imranasghar5225]

but steering wheel light still on.

[@MustangMotors]

It normally goes out when driving, can you try that.

[@civokjaf7809]

I have a stabilization error, but my car won't start, and I can't push down on the brakes the radio and light all work.

[@MustangMotors]

Can you get the fault codes from the obd2 scanner

[@civokjaf7809]

@@MustangMotors it was the battery car had same battery since its release 5 years ago.

[@sarp7528]

Aynı sorun direksiyonda

[@travellman2502]

Pls help me broi

[@simplysimon966]

why do people put dumb music in these videos