Thanks for showing how to remove the shift knob. This worked on my 2012 XC60.
@billshoff4 жыл бұрын
The beige gear shift knob on our '08 V70 was badly worn so I bought a used black knob from Erie VoVo and it took less than 5 min to install thanks to your video. I even used dental picks like in the video. Thanks!
@JeffersonMartinSynfluent5 жыл бұрын
Looked like you twisted the collar clockwise; not counterclockwise.
@ednaayala27054 ай бұрын
Awesome love the way you work with directions and you’re talking clearly in the video I’ll give you 100% on that you are very good
@misiomisio2335 Жыл бұрын
Yuri, I just bought few days ago 2008 Volvo xc70 3.2L only osiemdiesiat thousands km. Toronto Area excellent shaped. I'm glad watching your Videos, harosha robota, spasiba !!!
@keithbainbridge4964 Жыл бұрын
Very good but you turned the lock ring CLOCK WISE to remove it & NOT anti clock wise 👌👍
@sporttruck51034 жыл бұрын
This video was helpful when I changed my shifter knob. Thanks.
@msw6008 жыл бұрын
Also knob I believe has to be pressed when removing it too. You showed it has to be pressed the knob when installing, but also when being removed from what I read elsewhere with a diagram online. I read that screwdrivers can be used to remove tabs off indentation to release knob before pulling it off. Here you used picks that look similar to dental picks. I guess either is fine. Nice video.
@volvotoyota48504 жыл бұрын
By the way I think prices went up like 25 percent from what I paid if not more. I replaced my gear shifter on my 2012 s80 like in 2014 or 2015. I think I paid like 75 U.S. dollars for it. I'll try to check my records. Now i see they are going for well over a 100 dollars.
@erzenishijaks5044 Жыл бұрын
How to repair the inner handle right rear door.does not open from the inside
@ladam23562 жыл бұрын
Have a video how to change all set gear volvo s80?
@antonzhloba69294 жыл бұрын
Another great manual! I wonder if you can reupholster the shift knob? Have anyone done that?
@donnikolas41803 жыл бұрын
Is this the same procedure to remove gear selector for 2016 V60?
@Kursk776910 ай бұрын
Why you removed?
@mer30azto3 жыл бұрын
Thank you for good video, How a bout S80 1.6 manual please? it's circular.
@mal4ik_bobby8428 жыл бұрын
добрый день. выложите видеоинструкцию как сбрасывать уведомление о сервисе)
@lanetaeschida6 жыл бұрын
Thanks for your video! I have a volvo xc60 2011 and have been trying to buy a gear shift knob that fits my vehicle but none of the ones I've seen look like mine. Coincidentally, yours looks like mine. Do you mind telling me the part number please?
@bostjanreseta30464 жыл бұрын
If I were to buy and install a new gear lever, is this plug & play, are there any modifications (center console, electronics ...)? From xc70 MY12 to MY15
@donstevens7847 Жыл бұрын
This video was very helpful, thank you! However, my "button" is stuck in the in position internally, even though the button itself is stuck in the out position, so I therefore have no lockout of reverse or park. Is it just not pushed down enough, or is something internal not right? Thanks!
@donstevens784711 ай бұрын
*bump* anyone have this issue?
@mcmediaandfilm9 ай бұрын
I love yourrchannel do you have a video showing how to replace the bulbs on the gearshift on the p3 park and neutral are not lit up on mine
@volvosweden9 ай бұрын
It’s led. Don’t think you can easily change
@mcmediaandfilm9 ай бұрын
@@volvosweden damn that's a bummer
@theowessman35348 жыл бұрын
can ypu please make a video of how to change the reverse light to led
@DavidxLinkan7 жыл бұрын
Can you fit the new Gearknobs on these old VOLVO V70's?
@huugthechav61614 жыл бұрын
Is there someone who can help me,how i have to remove the shiftknob from mij Volvo V70 2013/14 model?
@jno58 жыл бұрын
I really like the new style gear shifter and have been wondering if it can be retro fitted.....how much did the complete unit cost and did you make a video?
@brycedykes64067 жыл бұрын
jno5 have a look on some forums that's what I did,
@msw6008 жыл бұрын
I used two screw drivers instead of picks used in video. It works just as well.
@volvosweden8 жыл бұрын
What ever works for you. Good.
@msw6008 жыл бұрын
Yes, thank you. Nice video.
@eddm32378 жыл бұрын
Are you planning to replace whole gear shift with housing for dacelift model ? it is possible to replace for facelift one. i think it is much more nicer. it is just plug n play. =) i want to replace it because from poland it is very cheap only about 80€ fits from v40 xc40 v60 xc60 xc70 s80 v70 ;)
@volvosweden8 жыл бұрын
In my opinion the newer style shifter does not fit the cars design. I have no plans on do it that update. It is though a direct fit.
@rebelaris6 жыл бұрын
Hey Juri wanted to ask you since that is a long time question and I write on google and I dont get clear answers. But my question is , why did you choose an automatic transmission ? Are they better for the engine ??? I mean if you want to rich with a diesel car up to 700.000km its better an automatic transmission ? I just want to know if its the automatic better for the engine to last long or it doesnt matter if its automatic or manual. Im an owner of the V70 MY08 manual transimission I want to change my car to XC70 and most of them in the market are automatic.... I dont get it
@volvosweden6 жыл бұрын
+rebelaris Hey. Most cars are automatic today. Not many people plan on keeping their with high milage. Also not many people know how to drive manual including my wife. So I can't keep manual car in my family. Even semi trucks are more and more automatic today.
@andrei.ljapunov4 жыл бұрын
Спасибо! Полезно!
@gregoryhuntington79546 жыл бұрын
I see the polestar logo on the center console but not on the rear hatch or the grille? Is it different in Canada than the USA?
@volvosweden6 жыл бұрын
+Gregory Huntington Its just me. I plan on Polestar.
@mal4ik_bobby8428 жыл бұрын
и еще один вопрос, решил поменять масло в гидроуселителе руля, подскажите какого диаметра трубку взять, что бы масло сливать?
@volvosweden8 жыл бұрын
Если не ошибаюсь 3/8.
@mal4ik_bobby8428 жыл бұрын
+volvosweden а в миллиметрах?
@volvosweden8 жыл бұрын
+Виталий Махамед inch.
@mal4ik_bobby8428 жыл бұрын
+volvosweden ну если эта трубка у вас осталась, может померяете, как время будет. в беларуси все в миллиметрах.
@mal4ik_bobby8428 жыл бұрын
+volvosweden все, в интернете посмотрел. спасибо. 9.5 мм
@stefannylund34268 жыл бұрын
You can easy fit the newer gear shifter, everything is bolt on. I did it in my XC70 T6. www.forumbilder.se/F8T49/image.jpeg
@martinrickmanrickman78958 жыл бұрын
+Stefan Nylund It actually looks really cool! I have a manual, but I guess its pretty much the same Idea.
@volvosweden8 жыл бұрын
Great info.Thx. In my opinion the new style is not so great.
@cloatza898 жыл бұрын
hi, can you tel me, please, how much dose the knob cost where you live, because here in Spain it's like 170€ and I saw it in USA for like 53$. the bad thing is that to ship it they charge 70$. it's cheaper the EU but still... and do you know if they sell only the top/central part of knob. I saw it can be removed easily thanks
@volvosweden8 жыл бұрын
I checked and its around 150 USD $. Where did you see it at that price.
@cloatza898 жыл бұрын
+volvosweden I hope the link works www.tascaparts.com/oe-volvo/30756901
@cloatza898 жыл бұрын
www.tascaparts.com/oe-volvo/30756901
@cloatza898 жыл бұрын
www.tascaparts.com/oe-volvo/30756901
@volvosweden8 жыл бұрын
+cloatza89 Looks like the wood one is expensive. The aluminum is cheaper.
@rudyormowiec9177 жыл бұрын
and how in the manual?
@volvosweden7 жыл бұрын
+Rudy Ormowiec No idea.
@stefannylund34268 жыл бұрын
You have to get the complete set from a -13 or newer, these are dirt cheap to buy. www.forumbilder.se/F8SKJ/volvo-v70-2016-vaxelspak.jpg
@cloatza898 жыл бұрын
hi, do you have a part number for the gear shifter?