Changing the ignition cylinder on a 2005 Volvo semi truck No voice comment nor caption due to lack of time Turn the key to accessory position and use a small screw driver to push the spring clip in to release the cylinder
Пікірлер: 8
@whoryder3 жыл бұрын
Didn't say a word....but actually made sense and helpful... THANKS
@marios1garage676 Жыл бұрын
Thanks for the help
@iLaundryApp3 жыл бұрын
Thank you so much it really saved me money and time, I just replaced it 👍
@PAT1114 жыл бұрын
To remove the key cylinder tumbler from old switch, turn the key to the accessory position. Use a pick or a small screw driver push into the hole on the flat part of the cylinder body. Not the hole on the ridge on the cylinder body. Push in onto the copper spring plate while pushing in the key at the same time. You should be able to feel spring tension as you push in the spring right though the hole. Pull lock cylinder from the switch as you are holding down the spring. This may take a few tries.
@bad_soup16433 жыл бұрын
What if I don’t have my key ? I lost my keys and I need to replace this idk where to find instructions
@michaeldore65073 жыл бұрын
Very helpful
@kurdballsisgone1127 Жыл бұрын
Mine didn’t work. 6 people at Volvo couldn’t get it out either. Thanks for sharing
@linuslarsson344211 ай бұрын
But wasnt that a Jeep/chrysler key? / A Key Maniac