Volvo XC90 D5 injector and nozzle repair + lid gasket replacement.

Pulling out the injectors for the nozzle repair and refit onto the car.
If you like the video, please dont forget to leave a like and of course a subscribe! Thank you!

[@davidchadderton5904]

Great detail. Thank you. Now I know how to reassemble my XC90 injectors and top end. Thats the job that my local garage workshop have been incapable of doing after 6 weeks of lying to me and not doing any real work. To be fair, they did manage to remove the parts and clean them before abandoning the job and pushing the car out onto the grass verge for me to have trailered home by breakdown truck.

[@ViorelaCioban]

Good job! 👏🏻

[@izyfication]

Great vidéo Thank you very much 👍🏻

[@Patrick-xb4pw]

인젝터 홀 청소는 전동드릴 끝에 작은 복스알 6~9미리 복스알을 꽂아서 거기에 호스를 인젝터 길이만큼 잘라서 꽂은 후에 끝에 헝겁,천, 목장갑 손가락을 잘라서 끼우고 인잭터 홀에 넣어 전동드릴을 돌리면 최고의 세척기가 됩니다. 한국 정비사의 아이디어를 공유해 드립니다.

[@StuWNZ]

Very helpful video. My injectors are stuck and I can get them out.

[@pintiliedaniela3598]

👍👍👍👍

[@vioricacioban485]

👍

[@josealbertogarcia1095]

How about Leon's Garage, could you tell me with how many kms did you do this maintenance? Thank you very much in advance

[@johnmcguinness7116]

Injector lines are they self bleeding after reconnect

[@paulablaga3]

👍👍🙋‍♀️

[@bartoszri]

do a fuel steel pipes have a gasket (o-ring) ?

[@user-kh3yw7rc1w]

Hola saludos parese ser que saves mucho sobre los carros volvo y te quiero preguntar en donde tienen el sensor et este tipo de auto en el que estas trabajando pir favor si me puedes ayudar con la informacion gracias

[@ciobanflorin9832]

Beton!

[@Sergiu_Cioban]

Ezoz

[@kuba1515]

What about egr vavle. Did you clean it as well?

[@leonsgarage9085]

I dont't remember cleaning the Egr valve 🎀

[@kuba1515]

@LEON’S GARAGE If in cylinder head ports was so much dirt that means the egr vavle is clogged as well. This vavle is main reason of this mess in intake system. I spended 3 days on cleaning this. You achevied very good results in cleaning the cylinder head ports, I had the problem with cleaning the intake vavles itself because they are to far from the enter of the ports.

[@leonsgarage9085]

I have cleaned it before.

[@kuba1515]

@@leonsgarage9085 did you use something else than rags, brushes and vacuum cleaner?

[@gabitapre5766]

Buna treaba... ar ajuta mai mult sa si vorbiti(explicati) ce lucrati... Sper sa nu supar cu sfatul... multa sanatate

[@leonsgarage9085]

Buna ziua, orice Intrebare aveti, va raspund cu Mare Placere

[@inmuque]

@@leonsgarage9085 hola muy buenas tengo un problema con un volvo xc90 d5 2.4 163cv tiene un ruido en el motor tipo , así po po.. po..po..po, podrías ayudarme??

[@leonsgarage9085]

@@inmuque si si

[@inmuque]

@@leonsgarage9085 te puedo mandar video?

[@BlueSky-bx5tf]

Right after you have put everything back together, the motor started right away? Didn't you prime the diesel out of the lines?

[@TheEdudo]

in sprinters it is self purged system, the air is sent to the return line and also they have a electric priming pump

[@Parknest]

You just have to cycle the ignition a few times. That what I did when I changed the fuel filter on my own XC90.

[@bravio9928]

Sie müssen zeigen wie drehen Injector draus.

[@johnmcguinness7116]

Do new injectors need coding

[@ludviksletta3585]

Brand new: yes. Used: no

[@gasgiant7122]

Another “no speaky” video

[@emilianmatei9443]

👍