KONYK rear suspension for m365 unboxing and the first look

Hello,
this time I have a rear suspension KONYK for the xiaomi M365.
The key highlight for this suspension is of course air shock.
Where to buy? The buying process was a bit weird and took a bit of time. I had to find the seller's contact on his youtube page: / @1exist and then reach out to him on Telegram @Xilston. Telegram group: t.me/m365suspe...
The seller has replied after a while and I have paid him through the TransferGo app as he did not accept PayPal. Shipping to Denmark took about 2 weeks or a bit less.
*The rear light cable snapped not because I hit it somewhere, but because the rear fender is moving with the suspension. I will need to figure out some more creative way to run the cable to the tail light.
Thank you all for watching! :)

[@FlavioBozzoli]

I bought a suspension very similar to this one. It has a visible black spring and not this Konyk one, but it can change. I have to say, you do job very well, of course it's also adjustable. I cut the piece of the fender with the three screw holes that they used to use to stare at it.

[@VRMinde]

Someone already told me there were similar suspensions on aliexpress. I will probably 3d print a shorter fender, but need to find time for it somewhere :))

[@bigpete8567]

You need to upgrade the front to Monorim and buy separate the same air shock on it that you have on the back, I have this on mine and it is great! I have ordered the Chinese rear suspension off eBay here in U.K. which looks identical to this for around 55euros and it does come with a brake cable extension piece, rear light extension cable. I have the same rear air shock ready to fit to it. In total cost me about 99euros delivered.

[@VRMinde]

I am considering the monorim 👍🏻 It would be interesting to see how many differences there are compared to the chinese rear one 🙄

[@emptydynamix2840]

That with the battery extension underneath would be perfect

[@themanonwheels5988]

it looks like part of the effect of the rear suspension comes from the low pressure of the rear tire. would be great to see what realy happens when the tire has a proper pressure.

[@VRMinde]

I need to inflate it of course :) I do not think it will impact the work of the suspension a lot. I might film a follow-up at some point if it ever stops raining here like crazy

[@Until_It_Is_Done]

@Terrance Alex wow! That's sad. Nothing better to do?

[@fuckfannyfiddlefart]

With compostable packaging there really is no excuse for single use plastic, LIKE for pointing that out!

[@VRMinde]

Thanks for the support mate!

[@ElJony-kun]

El que venden en Aliexpress trae extensión de cable de freno y de luz, pero este tiene mejor altura y que sea de aire lo hace muy buena opción.

[@Bergwacht]

Unfortunately, the mudguard is fixed in the same way as with the china suspension, it will start to rattle while driving. That's a real damper, not a useless spring👍 you will have fun with this suspension 🛴

[@VRMinde]

If that happens I will have to find a fix. Harmte rattling :D

[@Full_Throttle_no_Brakes]

Not only for this part but more like a DIY general advice. For Any 2 pieces of metal rattling, just put a piece of rubber or plastic between the screws, get longer screws if you need to. Problem solved

[@Bergwacht]

@@Full_Throttle_no_Brakes I even have a mudguard bracket on the German model but still everything rattles ^^ Think I'll buy ohne of these half mud guards and put the license plate on the side. i.postimg.cc/X7pGvyg4/Unbenannt.jpg

[@icebreaka1969]

wow, with all those upgrades, pretty much you are paying for a price that can buy a Zero 10X or something nicer. you made the common M365 completely Un-Common. You just made me Miss my M365 that I have sold a while ago.

[@VRMinde]

Yeah I know man :) I am getting some channel monetisation money and putting into these upgrades so people can see what works and what doesn’t. I am not sure if buying a acooter with all the upgrades already is not a better solution :)

[@icebreaka1969]

@@VRMinde that's true, Because I am doing the same thing you did in the video to my brother's M365, lol thanks for your video and info, keep up the good work, thanks.

[@nigelorion]

Nice! Looks awesome. You should try the monorim v2 for front suspension

[@VRMinde]

I am considering it for sure

[@buzzhd1078]

Believe me 365 made for not having suspension my exp without is much better and smoother

[@VRMinde]

@@buzzhd1078 well I have both with and without and even on my test-ride day I tried everything on both scooters. I do prefer one with the suspension :)

[@michaelbmw1931]

@@VRMinde which is best suspension company for xiaomi

[@VRMinde]

@@michaelbmw1931 I like the monorim v2 in front. And konyk at the back. That does bot mean they are “the best”, plus have in mind that I am using air shocks both at front and the back that makes those suspensions work well

[@joosepvall6370]

I noticed that you are driving with the battery lid open. That is quite risky, because water could get inside the system and completely ruin the scooter. I wouldn't recommend doing that.

[@VRMinde]

I know man, fortunately in my last 2 years of riding scooters (a lot in the rain) the water never got in there. I simply hate that plug, it is not easy to close :)

[@qg786]

The front suspension is only noticeable if you have semi solid tyres on the front wheel.

[@VRMinde]

I will try monorim I guess :)

[@qg786]

@@VRMinde Now that I watched the whole video. I realised that the front suspension on mine could be a lot better as I have a spring rather than a air shock absorber. It still works but having the option to fine tune it would be great. If only they made the side plates out of carbon fibre as it's light and strong. My scooter is starting to get heavy with these additions.

[@VRMinde]

Suspension needs to dampen both ways to work :) I think carbon parts would be possible to do. Then not the weight of the scooter is the biggest problem, but the lost weight in the wallet :D

[@qg786]

@@VRMinde Not unless you buy the carbon fibre cloth and resin and make it your self and then cut out the shape. 😏

[@tomszyb7834]

You can get a extendable kick stand

[@RoyMcAvoy]

Nice. I wish this is easily available in my country as the monorim.

[@VRMinde]

True. I hope that the guy will establish some eshop with global shipping or something like that :)

[@TheVallety]

Nice review!! Keep doing them!! is the rear shock absorber 150mm or 165mm? Scooter looks really flat taking into account that front suspension is higher than stock one.

[@VRMinde]

The rear tire is 10” and the front one 8.5” :) I think it is 150 but don’t quote me on that :D

[@donovanavi8608]

Instablaster

[@cihanlost]

Wow, great test again! Thank you for sharing your infos. I was also curious on that part. It has its benefits. For me the worst thing is the price 😄 compared with the total price of the scooter. The idea to try this with solid tyres sounds interesting though 👍

[@VRMinde]

Yep, if I would sum up all the upgrades with the stock price of the m365 I could buy another (better) scooter for all that money :D Fortunately I am using the monetization money from this channel to try out all these "toys". Thanks man for your support!

[@cihanlost]

@@VRMinde thank you for testing all this stuff. I like it that you don't promote things, you just show if its useful or not so that everyone can think about. For me the best channel so far and it is a joy to watch the cool clips, with slomo, sound and all the action 👏

[@VRMinde]

@@cihanlost thanks man. Very kind of you! I am very happy to be able to do what I love and be helpful to the others at the same time

[@austieoutdoors9763]

if you buy the monorim suspension you get the plastic bit for the stand and you get the extra cable aswell so that should solve your problem or just cut a piece of outer of a other cable for your,s hope this will help you abit. and no don,t put them horrible hard tyres back on i have just put mine soft tyres on mine and i love them and i have got some anty puncture tape on mine so im hoping i won,t get a flat lol

[@VRMinde]

The rear monorim? I really despise how it looks mate :)

[@austieoutdoors9763]

@@VRMinde the one you had is but there is another one budd and its well better the one with the little mudguard on the back ill post u a pic bro

[@egg-...]

@@VRMinde me too, why does it have to cover the whole rear tire

[@thamirislungaretti6140]

Man, those bolts that hold the stop mud in the back is my scooter got broken... so to me is kind of impossible to install the suspension. Have u ever saw something like this? Because I see is essential to attach this part and it's very hard when u have only one bolt available

[@VRMinde]

Well, if you have at least one - you can always find some bolts for replacement :) if they are not “generic” ones that you can buy by measuring the size, then you will find them on aliexpress somewhere I am 99% sure

[@thamirislungaretti6140]

@@VRMinde thank u so much for your answer! I have them for replacement :) just the problem is the previous ones got broken inside the component... this was like a curse hahaha

[@VRMinde]

@@thamirislungaretti6140 take a drill (smaller drillbit than the bolt) and carefully drill it out :) it is possible :) CAREFULLY is the key word here :D

[@thamirislungaretti6140]

@@VRMinde thank you so so so much! I'll do it asap and than I'll tell u if worked hahaha I hope not lose my fingers on it hahaha

[@mickeypadge6811]

Now unavailable, big shame really, I would buy this...

[@aldisgarais]

I also ordered this rear Suspension but now I hear some sqeaks from the spring. Should I change it?

[@VRMinde]

You got one with the spring? Can’t really advice on the spring man.. can some oil on contact spot help?

[@aldisgarais]

@@VRMinde ok I will try

[@channajayampathi]

for 10 inch tires they provide suspention kits like this? please can you tell me

[@jinjinpyo28]

Curious if you can have a pneumatic front and solid rear tire setup with full suspensions. Since study says 90% of flats happen on the rear tire. To see if rear suspension can compensate the ride quality of rear solid tire. But at the same time your still have pneumatic front to balance ride comfort.

[@VRMinde]

I think you could, but honestly almost any pther tire but the stock one lasts forever without punctures. I have other scoots on solid tires and I do not like theor grip, do not trust them on corners... For now I am keeping the 10” air tire at the back and just installed the 4th gen CST 8.5” on the front.

[@perpe2ual143]

Nice video 👍🏼👍🏼 I’m not a fan of modding the m365 too much. Would rather get a second off road scooter built with suspension etc. At some point all that added weight has got to start being a negative. Still tempting though 😀

[@VRMinde]

I do not feel the weight while riding, but you have a point here :) I would say money-wise it makes more sense to buy a more expensive scooter with suspension, more power and bigger battery :) at the same time it is fun to explore :)

[@blv4770]

Salut, très bon système déjà monté sur nos models custom depuis plusieurs mois. Juste que nous avons contactés que le A5 fonctionne mieux dans l'autre sens. Sinon c'est top. Nice job 👍

[@kriss1313]

The way metal bends at 2:43 is not good. Put a broad washer there. Also the brake housing is too tight and straight, tha cable causing excessive friction and wear.

[@ItsAllGoodGames]

Thanks for video

[@VRMinde]

Cheers man!

[@joelcerqueiraafonso7078]

Hey mate! Really nice Video! I was thinking to get one rear suspension as well but I can't decide whether monorim oder this one. Did u try both? Which one is better?

[@VRMinde]

Hi, no mate. This is the only one rear m365 suspension I have tried. I did not like the looks of the monorim split fender :)

[@bboytyby]

Put front motor in the back. Grip and wheelie

[@VRMinde]

Oh it is there now already for some time :)

[@joakimbrandin7115]

i have same froont suspension and bouiught back to from china 75 euro for both they are amazxzing the friont its super for the price bnnothing can beat it! btw if u bought frioom kina u get fre kickstand haha just waitoing for my 10 inch tuires comes this weak and have 135mm and xtech brakes goonna make it a rocket

[@BarbeRodzTV]

Wowww amazing setup like a blade 10😯👌❤️

[@VRMinde]

It works :D :)

[@AireDeZapatos]

hello VRMinde, now 1 year passed, would you still recommend that Konyk rear suspension ?

[@VRMinde]

Hi, still use it, not a single issue yet :) very happy user

[@AireDeZapatos]

@@VRMinde thank you

[@anonymousk9229]

6.53 Umm nope the stand does work you have just mounted it the wrong way.

[@VRMinde]

What way should I mount it? It is way too short after 10” tyres + double suspension, does not matter which way you will mount it. It needs to be like 5-6cm longer

[@martystarkb.n.e307]

Great video👍 also not much in the way of diy on the scooter just moving bits every other one I’ve seen needs some new hole or something cut off. Quick question for back inner tube valve...can you fit a straight valve inner tube Ordovician need a curved valve?

[@VRMinde]

I do not know why some comments are not "flagged" to me by YT. For the back wheel straight one works just fine :)

[@danielmayer3490]

Hi I m from Argentina and I can’t buy it because we can’t import this like that but y want to make my own mine, can you help me with the measurements? Really thank you!!

[@VRMinde]

Hi man, I literally have no time to disassemble and measure it. I have like 5-6 ongoing projects and one last week of summer holidays :) I hope you can understand. I can only take rough dimensions without disassembling it some day

[@Sergey_S-314]

The tires are empty

[@VRMinde]

Yeah, I noticed when I was already out :)

[@abati666]

Hello Sir, just a quick one, does this suspension work on xiaomi m365 pro version or just the m365? thanks in advance for your vids.

[@VRMinde]

As far as I know only m365, but he has a version for the pro coming out soon. Better reach out to him, I did not ask about the pro model. Thanks mate!

[@reaper7427]

Hey it's me again, what would you recommend adding to the M365? since I have a M365 and want to make it more comfortable and just like a project car but it's a scooter

[@VRMinde]

I use monorim mate, I think it is the best of what is on the market now. I use it with dual air shock, the double shock is not great for lightweight riders. I have not tried the one that comes with monorim. I made a vid about my suspension here kzbin.info/www/bejne/mHzLdKx3m9yYa7s

[@soumynonareverse7807]

Is there a front suspension which you do recommend? I might actually buy the Xioami with this.

[@VRMinde]

So I have not tried, but everyone talks positively about the Monorim V2. Apparently, you can fit it with the same shock absorber as this one on the rear. I cannot fully confirm it as I have not tried it myself

[@crashdummy4983]

monorim is the way to go. i would recommend the one with the exposed spring (model t0-s) because you can adjust it to your preferences. the monorim with the enclosed spring looks better but has only two options (2 different springs) for adjustment

[@soumynonareverse7807]

@@crashdummy4983 nice, do you recommend a mud guard for that? If so, does it exist and where can I find it?

[@crashdummy4983]

@@soumynonareverse7807depends, if you go in wet/muddy roads then obviously yes you need one. you can use the original xiaomi mudguard, but if you meant the mudguard holder there is also a monorim fender adapter. looks crap but does the job. if you wish a good looking one you can print a 3d model. there a few free models to download at thingyverse

[@oliverbode9257]

what did you pay DKK in total for that thing? mmight go with it instead of monorim MR1 btw thanks for the video didn't even know this suspension existed

[@VRMinde]

If I remember correctly now it was around 150 eur with the air shock, so somewhere around 1100DKK or so. Thanks for the comment mate!

[@Shkiper41Rus]

Подскажи пожалуйста на счёт переднего амортизатора,ты сказал что смысла в нем мало было

[@VRMinde]

Да говно там не покупай переднего. Лучше копить деньги на Monorim

[@Shkiper41Rus]

Благодарю)

[@jayhennessy8317]

Nice video again how have you found the konyk shock for last few months thanks for sharing

[@VRMinde]

I saw some chats on the telegram group that it was hard to get it. But if you need one try reaching out to @Xilston on Telegram

[@ToptuningTV]

On the order sheet says for m365 and another for the Pro, if I have a Pro will it work? How about weight limit?

[@VRMinde]

For the pro they are different. I do not know about the weight limit, but my shock absorber is pumped to a very low level, compared to mtb or what the pump can do 🙄 and I am like 85kg

[@paulotarso2928]

what to use to lubricate the air suspension of the A5-RE exa form?

[@VRMinde]

Never lubricated it yet. Maybe someone else will have a good advice

[@gmnn88]

There is no need for any external lubrication. Instead those shocks require periodical air spring service as well as damper service. Search youtube for videos explaining air spring service of any generic mountain bike shock (rockshox monarch, fox float). Same applies for this one as it looks like the same and it is produced by Kind Shock, company known to manufacture some mtb components. As for service intervals they are roughly 25 hours for air spring and 100 hours for damper. Could be more depending on seals used. Also based on my experience servicing mtb suspension (like 12 years) I would recommend servicing it before use because sometimes factories assemble those shocks with little to no internal lubrication(a common problem back in a day, rarely encountered for few years, but given how easy it is to check - I always prefer to make sure the unit will last).

[@jameslost7371]

Hi, thanks for the video. It is very informative. I was thinking about monorim rear suspension but I really dont wanna get extra hole on my scooter but referred by many users. And, according to this video this also seems very reliable. Do you have any opinion about it? Thanks.

[@VRMinde]

Hi man, thanks for the comment. I did not like how monorim looked. Reminded me of toyota prius 😂 this suspension still works fine after a lot of abuse, I am happy with it. I have installed the motor in the rear as well, still works fine.

[@jameslost7371]

@@VRMinde totally agree with you... Yes, I have also installed it and I am very happy with it. Thanks for reply... 🙂

[@VRMinde]

@@jameslost7371 glad it works well mate!

[@HristosInAfrica]

Monorim is worst. Don't buy monorim. Many problems with it.

[@VRMinde]

@@HristosInAfrica I am using monorim now for more than a year, jumping in pumptracks, riding all types of roads and I did not have a single problem with it. What problems do you have with Monorim?

[@Shkiper41Rus]

Replace kickstand to near motor wheel it will better

[@VRMinde]

That is one of the things on my “to do when I have time list” :D Now with front and rear suspension, even the longer kickstand + 3dprinted extension is too short anyways!

[@Shkiper41Rus]

@@VRMinde y, it’s better

[@justinhancock595]

How does this one compare to the aliexpress rear kit? Is the shock 150mm?

[@VRMinde]

The rear shock is 150. I cannot compare the aliexpress one as I did not have it :) From the looks they look rather similar, I do not know if there is any difference in the bushings and steel itself 🙄 I was very unhappy with the quality of the front one from aliexpress and did not want to try the rear one :)

[@christopherbate6248]

Is this 10” wheels ? 10” tyre on 8.5” wheels ? I’m confused 🫤

[@VRMinde]

10” tyre on stock rims

[@JRMD]

Installed mine both the 165mm at front and 125mm at the rear. May i know whats your psi on the rear main chmber and negative chambers? Thanks!

[@VRMinde]

I barely use the negative chamber on scooters. And my rear one is a single chamber one :)

[@edgardobarnuevotv5439]

where"s the hook when folding the scooter?

[@VRMinde]

There is a 3d printed hook you can install on one of the top horizontal shock absorber spacers (red ones). But I assume it would rattle when riding and did not install it.

[@Re0xHVH]

that looks so cool wtf

[@VRMinde]

Ukrainian product mate!

[@giuseppecannetta4626]

👌!!! Measure of suspension bro?

[@VRMinde]

all specs here man kzbin.info/www/bejne/eKOZcqSYjsqBaZo

[@droboch]

Konyk - Конык from Ukrainian it's a grasshopper OR Коник - a small or baby horse. Something jumping other words. The channel of the developer kzbin.info/door/kH4EzKq-2BuM1bXEVti9qw

[@droboch]

Comparison of Ali and Konyk - on russian but with photos electro.club/forum/amortizator_dlya_m_365?page=25

[@VRMinde]

Спасибо за информацию! I can read Russian and I will try to look up that comparison when I have a bit more time. Thanks man!

[@VandKoala]

Так насколько я вижу разница в качестве и в количестве металла. Ну и конник более подходит для апгрейдов.

[@eletronicaservmaq]

does this damper have the oil damping return?

[@VRMinde]

Well, by the feel it definitely does, but I did not disassemble it (and I am not going to unless it will start to leak one day) :)

[@escooterlife]

They make duel air shocks too

[@VRMinde]

I saw someone making those. I am not sure if it's necessary though. My MTB has single rear air shock and it gets so much more impact on drops :D

[@escooterlife]

@@VRMinde ok,nice setup! But I’m more interested in your ski hat where did you get this from because I’m from London?

[@VRMinde]

@@escooterlife I think I got it in Italy while skiing if I am not mistaking :)

[@neunmalelf]

Very informative! 👍 Do you have a link for the pump?

[@VRMinde]

Thanks! No man, I do not. I bought it like 3 years ago or so. It is a fox pump I believe. Every bike store should have one :)

[@Shkiper41Rus]

Друг,спасибо) буду себе тоже заказывать

[@eletronicaservmaq]

does it have suspension with safe oil return?

[@rowess1]

How long is your rear shock absorber, 165mm?

[@VRMinde]

No, the rear is 150 I think, front one 165

[@ediwowcubao1272]

the suspension in front is compatible to xiaomi pro 2?

[@VRMinde]

In front I have monirim. Should be compatible to all m365 models. Check the monirim web to be sure

[@ediwowcubao1272]

@@VRMinde where to buy? thanks mate

[@VRMinde]

@@ediwowcubao1272 i bought mine on www.monorim.store 🙄 probably 🙄🤔

[@JRMD]

Is that a 125mm double air chamber suspension you used?

[@VRMinde]

I believe its 150 and it is definitely single chamber

[@OGNovemberSix]

Just curious, what air pressure do you have in your tires? When you jumped the rear tire almost looked like it had to little air in it? 🤔 Do you have that for some good backthought for that? i personally got the monorim v3 front suspension and will get my konyk next week. Also have air shocks back and front, but im still experimenting with air pressure in shocks and tires to get a really smooth ride. Thats why i asked! 🙂

[@VRMinde]

Hi mate, I just had the tire on a bit of low pressure on the day of filming :) I do not play that much on my scooter tire pressures - just inflate them to the max recommended and (as you can see) forget to pump it up sometimes 😂 I change the suspension pressure a bit now and then depending where I am going to ride.

[@paulamartin.99]

Hi,what size is the a5-re? Ty

[@VRMinde]

Dam I had it out yesterday and did not measure 🙄 it is a bit shorter than my 165 front one. I am pretty sure it is 150mm

[@cj37373]

What sealant are you using?

[@VRMinde]

Good question. Some sort of generic silicone-based black sealant from local hardware store.

[@baghdade]

nice build, how much did the rear suspension cost?

[@VRMinde]

With air shock and shipping it was around 150 eur

[@baghdade]

@@VRMinde tanks for the reply, hope u can do a comparison with the 40$ aliexpress one.

[@VRMinde]

@@baghdade I did not order it yet, I have monorim waiting to be installed, Kugoo Kirin S1 to be reviewed and another product from other industry for other channel :) So I am a bit busy, therefore, if I will do comparison it will not be sooner than about 2 months I think...

[@user-ud8uj6fv5o]

Hello guys. Can somebody help me with buying Konyk rear suspension for xiaomi pro2 please. On official website it says that already sold out.

[@VRMinde]

I have no “unofficial” channels, maybe someone else will help 🤷🏻‍♂️

[@user-ud8uj6fv5o]

@@VRMinde please, can you add me there???

[@VRMinde]

@@user-ud8uj6fv5o you read something wrong - I do not have any unofficial channels man :) try Telegram group t.me/m365suspension

[@lifeofsam3279]

me to ..wanted to get one... i checked the source ..they are from Ukraine... sad to hear...

[@lion555ify]

@@lifeofsam3279 just ask the guy on email they do front, back suspension for xiaomi, now they started front g30 and g2 i think

[@BarbeRodzTV]

Where can buy that one sir?... I'm here in Croatia Europe

[@VRMinde]

I don’t think it will be easy as it used to be made in Ukraine and ordered through a Telegram channel

[@proxyhx2075]

@@VRMinde Bought the newer V2 version today! The guys are back in business after a long pause due to the war. I can't wait to see how it rides!

[@VRMinde]

@@proxyhx2075 well, you will not regret it, I think. They were doing it well and they ride hard themselves so they tested the parts. Happy to hear they are back in business!

[@SeeDaRipper...]

@@proxyhx2075 How about a link to the business mate?

[@abrahampuertas9036]

Get ones xuancheng tires

[@VRMinde]

I will check them out, thanks

[@d_javed1440]

Nice! How about the price :?

[@VRMinde]

It was 145 eur with air shock and shipping from Ukraine

[@hpiproceed97pcp20]

Will this work on the aovo pro ?

[@VRMinde]

No idea, need to mesure

[@jojo1533]

It’s it’s AOVO m365 pro then yeah it will work I got it

[@chemistclips]

græshoppe = коник he's on the box!

[@VRMinde]

Ok, I thought that was one of them :) Makes sense, creative. I like it :)

[@777phatman]

Is this available for ninebot max?

[@VRMinde]

I guess the only way is to reach out to the guys on Telegram and ask. You can maybe ask @lexist there

[@777phatman]

@@VRMinde thank you

[@nallo3244]

Is ur wheel pumped

[@VRMinde]

It was a bit soft :) now it is pumped :) kzbin.info/www/bejne/mHzLdKx3m9yYa7s

[@ZsanPortilla]

how to do no hands?

[@VRMinde]

Wear a helmet. Be ready to fall. Do it pn your own risk - it is dangerous. Stand sideways on the scooter so you can steer with your body weight, find a nice even road and set cruise control. The faster you go - the scarrier :D but also the more stable. Balance body weight on both feet evenly and start letting the hands off the bars for a very short time. That will make a start.

[@ZsanPortilla]

@@VRMinde thank you very much will try it. 😁

[@markvalenzuela9811]

can you help me to buy this?

[@VRMinde]

You need to try and contact the guy on this telegram group t.me/m365suspension If I am not mistaking you can try and tag him with @lexistore there and ask to buy it.. i know it is a mess, but that’s the process man

[@remfpage]

What PSI did you put on the rear?

[@VRMinde]

Hey mate, I adjusted it many times, depending where I ride. If I go jumping on pumptrack I inflate more, if I ride in city - less. I don’t remember exact number now

[@remfpage]

@@VRMinde any range? 50 to 70 or more.?

[@VRMinde]

@@remfpage I can check tomorrow :)

[@remfpage]

@@VRMinde thanks. Ill wait for it

[@VRMinde]

@@remfpage it is 40psi now mate

[@ElectricVRoom]

those were hard times

[@Ibragul]

what do u mean

[@mirror019]

What about weight now?)

[@VRMinde]

The rear suspension is not heavy, to be honest. I did not try to weigh it in but there are weights of all the parts in one of the konyk videos. I am probably going to go with monorim v2 on the front fork. Then I am still looking for the inserts to make the m365 2WD and then I want to move my external battery with Rita on the black scooter. Then I will check the final weight of the scoot with all the modifications :) It is not very concerning for me as it is parked on the ground floor and stays on the ground floor 99% of its' life :)

[@mirror019]

@@VRMinde Thnks, I'II wait:)

[@monsieurk1448]

Bonjour Où je peut la trouver cette suspension arrière ? Merci 👍

[@VRMinde]

I think it is a bit postponed now because of the pandemic. All the purchases through Telegram group t.me/m365suspension Or Telegram user @Xilston

[@Farhan-ob9ii]

How bout the quality, it's good or poor?

[@VRMinde]

I have no complaints. All looks well made, it is twice more metal than on the aliexpress version as well.

[@Farhan-ob9ii]

@@VRMinde you still can folded the scoter like before right?

[@VRMinde]

@@Farhan-ob9ii kind of 🙄 there is a hook for folding, I did not install it 🙄 good point actually - it is not perfect. I thunk it might rattle a bit

[@Farhan-ob9ii]

@@VRMinde yeah.. I saw at thumbnail there is no hook, btw thanks reply my comments nice review👍👍

[@VRMinde]

@@Farhan-ob9ii thank you mate

[@jimmiereese193]

Front suspension is bottoming out really bad. Horrible front suspension! Get yourself the new Shark Set Suspension!! Back suspension is ok. But you need suspension with coils/ springs on outside and adjustable if you want.

[@VRMinde]

Yep, front one is in the bin already. It is a complete crap! I got monorim v2 with 165mm double chamber air shock. That made the world of difference! kzbin.info/www/bejne/mHzLdKx3m9yYa7s

[@r22e2]

the suspension you bougt is 200/55 or 190/50 ?

[@VRMinde]

I have no idea what are these numbers mate

[@r22e2]

@@VRMinde these are option of suspension from link u left.

[@VRMinde]

@@r22e2 i have no idea which one is mine. At the time I was buying there was only one model :)

[@VRMinde]

@@r22e2 i have no idea which one is mine. At the time I was buying there was only one model :)

[@ngbc5342]

It's pronounced Chronic I believe?

[@VRMinde]

Nop it is not :D

[@lion555ify]

its wrote in english, where you see chronic ? btw, konyk in ukranian means grasshopper

[@fubene5495]

No bearings??? Well, still crap, it will come loose really fast,

[@VRMinde]

Do you have any experience with bushings/dry bearings like these? I only had them once on a garden device and they lived longer than the device itself. But I am not an “educated mechanic”, nor do I have a lot of experience with them 🙄 I really hope you are wrong man. 😂

[@michaelsharipsangki4767]

How to avail that one if from Dubai?

[@VRMinde]

Only by contacting the seller on Telegram, I guess...

[@Superior-Studios]

Bro refuses getting the monorim Suspension kit

[@VRMinde]

I really really really don't like how it looks :D

[@wallenbergphoto]

Those innertubes must have died fast ... To low psi hehe.

[@VRMinde]

Still on them :)

[@mudho100]

how much this cost

[@-COBRA]

yes

[@mudho100]

@@-COBRA how much cash is this

[@VRMinde]

I think around 90 eur with a spring shock and 150 with the air one 🙄

[@Luchek_chesnochek]

JUST BUY LIKE A EMOVE TOURING OR SOMETHING, TOO DIFFICULT

[@VRMinde]

Everyone has a choice :)

[@fleebleflam]

Should have bought the monorim rear suspension, Much better!

[@VRMinde]

Can I ask why is it much better? One thing for sure - I do not like their fender design 🙄

[@fleebleflam]

@@VRMinde If you look at some of the clone zero 10 X scooter designs, you will see they are based on the monorim rear suspension design. I do agree, at first it looked a little off-putting, but once you get it installed, you get used to it. It is also a far superior build to any other rear suspension out there. V2.0 will be out sometime in June i believe.🛴😊👍

[@VRMinde]

@@fleebleflam I hear you say it is way superior, but I do not understand what specifically is better compared to f.e. Konyk one. Can you please elaborate more?

[@fleebleflam]

@@VRMinde It's build is FAR superior, i.e Much Much stronger! The Konyk one doesn't look very strong, and is only connected by the original rear axel. Monorim is drilled to the frame itself, making it (imho) a far superior build. But like i say, it's just my mho. It still looks ok, i do like the fact that it has a proper air piston shock, & not a spring. That is my only plus with this suspension😊

[@VRMinde]

@@fleebleflam well, as you say we might have different opinions :)

[@carbeastsm]

I will just get a faster and bigger e scooter like the kugoo m4 pro

[@VRMinde]

Good for you man!

[@jangunnarjohansen2934]

Hvor kjøper man den er den tygg bruke

[@VRMinde]

I am not sure I completely understand mate

[@piciu256]

You really need to work on your bunny hop technique ;) You're supposed to lean back, not just jump up.

[@VRMinde]

Sure mate, waiting for a tutorial from you!

[@piciu256]

@@VRMinde there are many tutorials out there, its really just like riding a bike, i have the basic b-hop skill, and when I jumped on a m365 it felt like home.

[@VRMinde]

@@piciu256 I can bhop all of my mtbs, including the electrical one weighing 25+kgs. On the scooter though is another storry :) I agree with you - I need to work on it. Have not seen any videos on bhop technique on escooters yet

[@piciu256]

@@VRMinde actually, I checked and there appears to be no videos at all about how to jump an electric scooter specifically, so I'll make one, dont expect it to be of amazing quality or anything, but I think it'll give a good idea what to do. Tomorrow will be the day, since today there is not enough light.

[@VRMinde]

@@piciu256 yay! Good idea mate, looking forwards!

[@nerk234]

..the cost its almost more than buy a once....its no sense...buy another kinda. .

[@VRMinde]

There is not much financial benefit in upgrading the scooter. This one at least works, on the contrary to the cheap Chinese front one :)

[@crashdummy4983]

@nerk23 do you mean that someone should buy a scooter with integrated suspensions so it would be cheaper than buying the xiaomi and modding it with suspensions?

[@nerk234]

@@crashdummy4983 evryone can do anything prefer,but i think that this model just made x be essensial and basic, so some mod dont gonna be expensive and change the Real soul of this model...the praticity....and simplicity. .or you choice another kinda os scootrr/model ,with comfort susoension ,ecc,ecc....but this is my personal idea.....hoping you understand me ??. .

[@crashdummy4983]

@@nerk234 i my opinion it lacks the front suspension to make it practical. by installing one you remarkebly lower the risk in getting a flat tire. and changing the front tire is horrible. the solution might be solid tires but they lack the grip that pneumatic tires have.

[@Bergwacht]

Hello G30D but not goodbye m365 ;=)

[@VRMinde]

I wonder what is the next m365 :)

[@Bergwacht]

@@VRMinde it will be not the g30. The g30 cannot compensate for what has made the m365 an all-rounder - the price. Actually it was a very expensive downgrade for me at 800 € considering what my m365 can do now. The m365 has grown too dear to my heart, i have already ordered aluminum electrodes to weld the frame back together. The 20 kmh from the g30 quickly become annoying when I consider that my m365 simply drives 45 kmh.^^

[@VRMinde]

@@Bergwacht M365 for me is like the VW golf 2 :D it will have it's legacy :)

[@mihaiilie8808]

@@Bergwacht Be carefull when you solder with those aluminum electrodes because they are made from softer aluminum and the frame will not be as strong as original. I reccomend before you solder it ,to drill a small hole in the end of each crack to stop the crack go further.Then solder it and then reinforce it with somme steel . Better its to buy another new board.

[@Sergey_S-314]

КОНЬЯК! ))))

[@VRMinde]

Suspension products are somehow related with alcohol drinks, I can see :D

[@Dr32167]

Якконь

[@user-ut1gh2mi8y]

You are so green, wait for the traffic lights, let us go free.

[@sebastiankot1626]

kurde ale maniana a nie robota na siłę linka wyciągnięta płyta gdzie przewód musi być szczelna przed wodą a tam takie coś ;(

[@myurbanscoot]

Hello!! Check your instagram! 🙌🏻

[@VRMinde]

I deleted it on my phone, I am not sure if I can check it on the pc? I will see :)

[@eletronicaservmaq]

Veja esse bike aí kzbin.info/www/bejne/a6vCaoudbLOmeK8

[@user-zf8fl4ju4c]

hello. I want to do such a thing myself. you can take off the dimensions or make a template.? thanks

[@VRMinde]

If you want to steel someone else’s design - at least buy one. People put a lot of work in it. Or design your own from scratch. I would never help you steal someones’ work.

[@bryantponferrada]

@@VRMinde great answer!!! very well said

[@officeworldwide4842]

You can take some ideas compare suspension from other scooters and make your own best one, better innovate than replicate.. damn’ kids :))) and society:)) probably someone is looking for the meaning of “innovate” :))

[@egg-...]

@@VRMinde not to be rude or make your English sound bad but it's steal, steel is a type of metal

[@VRMinde]

@@egg-... thanks man, you are right.

[@DopeFiend]

Lil pricy.

[@VRMinde]

It is.. but it works at least :))

[@lion555ify]

pfff, cheaper than shitorim from china