Our Wrecked 2022 C8 Corvette Finally Drives And We Prep it for paint!!!

[@davidthompson245]

I must say, having Jake with you is a great help and motivation!.

[@carloslopez5086]

so happy you got Jake to help you out. you needed that help hope he stays with you working you guys make a great team much respect to you

[@muskokamike127]

1:55 old timer tip: if you ever have to mask inside a groove like that, leave about 1/4" of tape "unstuck" over the gap. then go along with a dull pencil and that will fold the tape over into the groove nice and tight. I've done that many times and it works like a charm.

[@thechosenone2587]

A rebuilder should not be afraid of any damage or salvage vehicles. He is the master of his own work. The harder the build the more he shows off his skills. More power vTuned.

[@ronwatson4902]

You and that Jake make a super team. I hope yall stay together actually and you make everything look so easy.Thanks Tennessee!

[@mfc4591]

Just an observation. Normally follow manufacturers spec as to filling oil, overfilling can result in seals popping out, remember there is a bit of expansion with heat. You need to get a shop truck , its going to save your nice cars !

[@muskokamike127]

he has a dodge ram shop truck....isn't finished yet 😞

[@trainmanbob]

Great video Ben. So good to see you and Jake working together. This is going to look stunning when it is finished. Cheers from the UK, Bob

[@philtucker1224]

Wow Ben that background music is smoking! (Great base beat) more please! 👍

[@allanrickard2117]

congratulations just over 600000 subs and we are all enjoying your no-nonsense builds that don't muck around

[@alvaroalfaro8979]

Loving this build and your helper Jake is great, your energy as a duo will take this channel to higher places!!

[@tommytech55]

Jake is a great addition to your channel. Looks like you two work well together.

[@nickthegreek8717]

Love watching you guy's working together.👍👍👍👍👍👍

[@rjh7070]

I hope Jake will say around for a while! Great job on the Vette!..Looking forward to the next build...

[@reginaldbyrd8073]

I'm just happy to see you have a helper for safety reasons.

[@jimwiskus8862]

The car is coming just great! I can’t wait to see this one back on the road. Looking forward to the journey of the C7 freebie. See you in the next installment.

[@yuppiehi]

6:39 LOL, what Ben said triggered a Steve Martin quote from one of his movies when he was instructing the landscapers on installing grass: "Sod side facing up!!!!"

[@gibson5056]

Nice video! nice to see a channel that actually gets stuff done!

[@danielvaher]

It's nice to see that someone is helping you 👍👍👍👍

[@ronmiller1162]

i have seen some guys take and drill an 1/8 inch hole in two different inconspicuous places on the rocker panel in towards the weatherstrip while you have everything bolted on the car so after you paint you just need to get the rocker on and slide your two 1/8 inch rivets into predrilled hole's and bingo you got your panels lined up and if you messed up drilling the guide holes you can fill the holes with a paintable filler but like i said in the beginning inconspicuous is key

[@CJMediaOfficial]

Gunna be crusing it soon! Dang the slicked back hair at the beginning 😎 legendary

[@rickgalla3377]

Looking great, but think about leaving the factory rims, there very nice

[@disciple8857]

Tacos for rims, nice. Ben your right, those dark tints mess up nice cars.

[@df9834]

Great to see jake working with you mate. Two heads better than one they say! 🤣

[@rickbareman2263]

Hey make sure you keep the help happy and feed cars looking awesome great team work, can't wait to see the finished product. 👍👍

[@adrianowen6524]

Great video again Ben good job guys Jake seems to be a good bit of a hand for you in your garage mate good work keep it up fellas sure it's going to be a sick car when done I'm sure it won't be long now!. Piece..👊👊👍👍👍

[@therealbill45]

Love your 20min videos. You make things look so easy.

[@francois1608]

i like the little notch you did in the upper corner of the door to allow the tube of the compressor to come out of the room in the back 🤣🤣🤣🤣

[@taurota1554]

awesome as always.thanks for sharing and taking us along

[@b.hodgkiss3893]

Is Jack a friend or another brother. Perfect team.

[@Onlooker71]

5:50 I had a 2015 Jaguar F-type S coupe. It was beautiful and a head turner, but wasn’t great to drive. Even when active exhaust was off, there was always a buzz noise in the cabin that was annoying. Stereo was nice but couldn’t hear it well over the buzzing. Suspension was super stiff and rattled the interior every time you hit a bump. I got rid of it after 2 years.

[@mattbo2003]

If you have a 4 door F150 with a glass roof, you need a tinted windshield. The AC can’t cool it down in summer.

[@alanwhitehurst2576]

You guys seem to be getting more work done than the goonz! Keep it up dude 💪😎✌🏻🏴󠁧󠁢󠁥󠁮󠁧󠁿

[@Kee-Von]

You're putting out great content man. Really enjoying this Corvette build and the other one you just picked up for free.

[@cactusjack3187]

Your new Videos are so nice to watch 💪 great Content, great team

[@haroldboyer1174]

Awesome video guys, great job.

[@paulgunter1538]

You both make a good team, really like this build ! Can't wait to see it all re-assembled !

[@BassManBobBassCovers]

Super sick how fast it's coming together! If the paint booth was ready and shipping didn't take forever, it's would have been done already! 😯

[@davidwood1923]

I've been Very Impressed with the Videos that you Guy's Put Out... I almost feel like I have been Working Along Side of You on This Vette

[@kennethwhitaker5470]

Always genuine . enjoying the content. Always great content

[@bigkev10101]

Awesome work on an awesome car. I like that it is a 1LT and a non-Z51. Can hardly wait to see what you think of it compared to all the other cars you have driven.

[@michaelhibbs4717]

Yeah, I asked my favorite car. You guys are doing a bad ass job that’s looking really good.

[@rainerjaschke5216]

You're the cats behind when rebuilding cars Ben. You and Jake have to get together on all your builds! You two make a good team!

[@ScottSwisher]

We love your hard work an dedication

[@EricScheck]

Someone already mentioned it but you guys are a good team. Keep up the good work! Love the content!

[@JerryHenderson72]

I'm not a huge BMW fan , but the M2 definitely interests me . I like sports cars I've never really been into the luxury brands .

[@craigmorgan4676]

Tks for the vlog brother, love cing this content and so regular!👌🙏🦾🦾🦾👊

[@speedyd1971]

Would be cool at the end if you broke down how much you paid for the car and all the parts and how many hours you guys put in. 🤘

[@krzysiekpfs895]

What about Ram to carry stuff from workshop?

[@pcar928fan]

It was probably clear ceramic on the windshield. Really helps with the heat, but is not tinted at all.

[@franciscosorto2024]

Great work V tuned

[@alphawolf5666]

Good job guys.

[@darrylschmidt704]

Great build. Did the trans need more than 2 quarts to top it off? I saw an odd trans fluid name...so much for dexron 7.

[@markplaton84]

Keep up the great work 1 million subscribers will be soon :) thx for your time as always

[@puttydabear]

Lookin Sick bruv watchin from the UK luv watchin all the builds... Phat rides

[@dvlop0018]

V back on the fast track. Awesome build guys.

[@enyionyeobia5103]

Ben, what happened to the yellow shop truck? Would be great for running to the tire shop.

[@terrallputnam7979]

Y'all need a pickup truck for those massive tires and wheels. The c8 is going to be very cool.

[@bobmanzi7712]

Great stuff guys thanks

[@waynek921]

Great work V.T.. the final results are coming up.

[@levonne766]

Great work!👍

[@holdn1398]

Great video guys. You fellas need a truck to haul parts around.

[@joed154]

Hi vtuned. I know its probably a long shot but i would cool to see you do a wide body kit on this one. Not sure if it super expensive or not though. Still enjoy the content. Keep up the good work.

[@137_DeathValleyCAL]

Where's your Dodge? Thought that was your shop truck?

[@Subgunman]

That gonna be one sharp ride when it’s painted! Going back to the McLaren, what adhesive did you use to rebuild a couple of mounting flanges on I think the front fenders? Need to pick up some to rebuild a plastic part on a project. Something NAPA might have?

[@glennarnold3970]

the adhesive ben used was called panel bond you can get it in different curing times from 1 minute to eight hours with a full cure in 24 hours depending on temperature but be aware there are different types of panel bond some will do steel aluminum fibre glass carbon fibre others will only do steel aluminum but it will say on the packet make sure you get structural panel bond i know this as a cert 3 panel beater in australia cheers from down under

[@mvolford]

V you do great work cat .

[@BigBisalreadytaken]

The background music is great!

[@chrislambert2889]

What's the green arrows on driver side A piller. 🤔

[@repz0611]

Nice build 👍🏻

[@michelswerissen6544]

Liking the rapid content..........like.

[@01gsr510]

What radar detector do you have in the BMW?

[@TomasVarg]

Great video Ben 💙

[@Chocolate_paglah]

Congratulations for 600k 🎉

[@deopersad2915]

You guys are doing well 👍🏽

[@wethepeople7629]

BTW who’s the new guy helping you? Cousin? Brother?

[@darcan8970]

cousin

[@raynavarra]

Great stuff 2 words, shop truck. Much easier to haul parts and wheels.

[@lindsay0951]

Ben. If the engine is in the rear why do they have a crank handle to start the car at the front of the car like they had back in the 1920's. ?

[@Fortune4tune]

A lot of lights on that dash of the Beamer!! 🤔

[@terrallputnam7979]

You and the Goonzquad boys love to use Good to Go tire shop. They ought to give you a real deal on work for all the free advertising.

[@GTiGLiTN]

Why didn’t you use the Ram to move the wheels and tires? I thought you finally got it done.

[@ORin2002]

❤️❤️❤️ beautiful

[@jacktritten608]

Back on your game👍

[@karlkascha1261]

Another great video Ben. Compared to other stuff that you have worked on, this is an easy build. Lol

[@JayLang7]

3:35 holy shit , for a second I thought Damon Fryer was doing a cameo. 🥴

[@zaidvallie2552]

Thanks for making videos try to keep being consistent

[@jasonnovia1846]

Keep up the great work!!

[@farnorthstreetcarz6522]

Since your painting all those body parts it wouldnt be to much more work to do a custom color instead of white. Just an idea! Great job tho love the builds you guys do great work 👍

[@jeffomalley6015]

Awesome job

[@markstangsn9518]

Good stuff guys 👍🏻

[@bodydraggersautoclub]

when might you be getting back on the Mustang or s2000? i get having to wait on parts etc. but its like you may have gotten burned out on them both. I am not hating just curious is all.

[@daynerampersad8968]

where is your Ram did youi give up on it, haven't seen any updates on it since the last one

[@alexiscalderon5343]

Why wouldn't you use the ram to take the tires?

[@JohnGotts]

Glad you made good on the tacos.

[@bobbyserchion]

Good video dog very nice vette too 😊

[@levizurch9480]

Awesome video!

[@laylazezo8151]

Good work bro

[@donaldwilliams2270]

What happened to all your shop trucks ? ( yellow Ranger / gray Ram )

[@raydaggers5773]

I must have missed a video. Who's Jake? Another brother? Nice work on the Vette

[@darcan8970]

cousin

[@comcamera91]

Your homeboy hooked you up for six tacos....priceless!

[@nikkojones2784]

Dude you're a beast. Broke that car down to the bones with a pair of pliers, a screwdriver, & a russian army pocket knife. 😂 You make it look so effortless...you Rock youngblood.

[@williamkowalczyksr6419]

Ben your car is getting done fast.