VW CRAFTER 2010 - Schlüssel verloren - all keys lost - VVDI prog + VVDI2 key transponder programming

[@olivercheruiyot]

I dont know what vw and mercedes were doing here but it very straight forward job. Did one about 3 years ago. never come across another yet.

[@PauliusR93]

Wow. Super good. Doing everything by one hand. Bravo!

[@anassa6809]

Did the same job couple of weeks ago. At the end realised the eis (ignition) doesn't have wafers inside. So with the right transponder and empty blade the car starts 😂. Good job as always!

[@schluesseldienst_muzler_de4067]

Thank you 👍. Uncutted key definitely looks cool 😂😂😂

[@filipmoney]

Couldnt you just immo-off and turn with any blank then? Or does the EIS stop this?

[@Geraskov-o6m]

Красавчик!!! Молодец!!! Круто!!! Восхищаюсь опытом и умением этого мастера!!! Здоровья, удачи и процветания вам!!!

[@schluesseldienst_muzler_de4067]

Большое спасибо, мой друг 👍

[@hogiegilchrist5307]

As usual excellent video and informative. Just done AKL on a Crafter 2014 and your Video helped. Many thanks.

[@nelsonocampo2721]

Amigo saludos quiero felicitarte exelente vídeo m ha servido de ayuda y x otro lado está genial tu sitio de trabajo muy organizado y con toda esa maquinaria exelente

[@namanibrahim7139]

Good. Elaborate and wonderful work 👍👍

[@namanibrahim7139]

Good. Elaborate and wonderful work

[@AAKEYS]

Good, I learn the remote control with autel 😊

[@schluesseldienst_muzler_de4067]

Thanks. Good to know 👍. I always use VCDS on this cars

[@emregulseren314]

thank you very much, Take care and keep making videos :D

[@schluesseldienst_muzler_de4067]

Thank you Emre 👍

[@gyorgylesko3318]

Is the XT27 super chip not work well on these? Better to use original ID48 and write back the EEPROM? Thank you

[@stein-arnefalchpedersen2222]

Good job as usual!

[@schluesseldienst_muzler_de4067]

Thank you Arne 👍

[@nobistech2398]

Super good 👍👍👍

[@saadandoura-xd1yl]

Good job 👏

[@GentritHyseni]

Keep it going bratee 🔥💪🏻

[@schluesseldienst_muzler_de4067]

Hocu Brate 👍

[@АндрейМуратов-ь9щ]

Здавствуйте, спасибо большое за обзорное видео.Не подскажите Volvo s80 в слот вставляется китайский ключ можно прописать?

[@schluesseldienst_muzler_de4067]

Спасибо мой друг. У меня никогда не было S80. Но ключ должен работать так же, как и на других Volvo. Мои тоже из Китая.

[@dominikpfeiffer9820]

Hey was würde den sowas Kosten habe das gleiche Problem gleiches Auto. mfg Super Arbeit 😁

[@autoschluessel_hamburg]

Aber Du kannst es doch mit dem XH Adapter auslesen, schneller und sauberer. Nix mit Löten. ST12 ( Sprinter ) Zum Schluss in die Immo schreiben, anhand eines "Test Hardware" testen ob der ID48 geht. Kostet zuviel Zeit...

[@schluesseldienst_muzler_de4067]

Hallo. Es gibt hier verschiedene Platinen. Die passen da nicht alle auf die Adapter. Am Besten von unten nachsehen ob die Pins alle richtig sitzen.

[@russia1593]

🎉🎉🎉good

[@schluesseldienst_muzler_de4067]

THANK YOU 👍👍👍

[@adolfpipetkin]

How I can contact with you?

[@schluesseldienst_muzler_de4067]

www.schluesseldienst-muzler.de

[@CydoRaveloson]

👍👍👍🙏 No comment

[@Ali-hr4de]

türkiyeye gelirsen sana 1 bira ısmarlamak isterim king

[@FG_BSS]

Kann ich die Adresse haben?

[@schluesseldienst_muzler_de4067]

www.schluesseldienst-muzler.de

[@АлександрАндронов-ы5и]

👌👍🔥

[@schluesseldienst_muzler_de4067]

THANK YOU 👍👍👍

[@Ali-hr4de]

👍👍👍

[@Roman_Malov]

👍🔥🤘

[@schluesseldienst_muzler_de4067]

THANK YOU 👍👍👍