VW GOLF 5 Headliner removing and repairing. HOW TO VIDEO.
Пікірлер: 135
@waynekhumalo7860 Жыл бұрын
This is honestly the best one I have seen by far👌
@VDEdition1 Жыл бұрын
Thank you very much.
@odjeljenjezajavnusigurnost48202 ай бұрын
kzbin.info/www/bejne/Y2i9apdugK-JeK8 That one is even better
@bobh.54237 ай бұрын
Is foam pad required under new liner? Looks like large amounts of thick adhesive was removed. Thanks for posting.
@VDEdition17 ай бұрын
It is not necessary to glue the canvas with foam, but since that is the case in the original, I used that canvas. Some ordinary canvas can also be glued, but the foam gives it a nicer final look. And it must be cleaned all the way to the shell, otherwise the glue will not be able to stick the new material. Good luck with the works. Greeting.
@shaagealgareb91892 жыл бұрын
very very good...thank you
@VDEdition13 ай бұрын
Thanks for the comment.
@DavidRabbani8 ай бұрын
Hello, I see you used dedicated dunlop headliner glue, was that used for both the paint brush application and the air gun? That's the only adhesive used for everything right? Did you just use the air brush to save time? Can I just manually brush all parts? Awesome video, thank you!
@VDEdition18 ай бұрын
Thanks for the comment. Yes that is the glue that was used. It can also be applied with a brush, and I use an air gun for larger areas because it goes faster that way. Greetings.
@DavidRabbani7 ай бұрын
I got contact cement because I couldn't find the glue you used anywhere, you think that would hold up fine? Awesome thank you so much!@@VDEdition1
@DavidRabbani7 ай бұрын
I wasn't able to find that glue you're using, but I bought some weldwood contact cement to brush on, do you think that would be okay to use?@@VDEdition1
@danielplumley2649 Жыл бұрын
I tried this with my mkv gti headliner and failed miserably 😂😂😂 I’m taking it to an upholstery guy this is not my kinda work. You did an impressive job!
@Sam-np4oc Жыл бұрын
What was the hardest part of it? Ive been quoted £600 for mine which I'm not really prepared to pay so gonna give it a go myself. Any help appreciated!
@EastDallasKicks Жыл бұрын
@@Sam-np4ochow’s it going?
@Sam-np4oc Жыл бұрын
haha ended up finding someone to do it much cheaper so went with them. @@EastDallasKicks
@VDEdition13 ай бұрын
Thank you for your comment.
@Scramblerkidd3 ай бұрын
I have done a few headlines over the years. First and foremost DON’T skimp on adhesive. Stay away from spray can adhesive. They don’t last.
@semmirs69208 ай бұрын
Pozdrav. Ako biste mi mogli odgovoriti na sljedece pitanje. Imam istog golfa, međutim kod mene je platno samo prljavo (prethodni vlasnik je pušio u autu, pa požutilo malo). Da li ima neka tečnost sa čime bih mogao oprati to bez da skidam sve? Koliko će to oštetiti samu podlugu? Hvala unaprijed.
@VDEdition18 ай бұрын
Pozdrav. Svako čišćenje krovnog tapacirunga na kraju vodi ka odljepljivanju istog. Mnogi se pitaju zašto?! Zato što ispod platna, odnosno mrežice krovnog tapacirunga ima sloj spužve koja mu daje mekani, luksuzniji izgled, kada je sve novo. Vremenom ta ista spužvica propadne, izgori, izgubi svoju formu.. Korištenjem sredstava za čišćenje koji su ugl. hemijska baza tu spužvicu dodatno ošteti, a i samo trljanje krpom ili spužvom razdvaja platno od spužvice i u nekim slučajevima se odlijepi odmah a u nekim za neki određeni period. Dubinsko pranje će pogotovo oštetiti spužvicu i sve će se odlijepiti. Nadam se da ste dobili željeni odgovor. Pozdrav
@ArturLaas-b7e Жыл бұрын
what material did you use and where did you buy it? thx
@VDEdition1 Жыл бұрын
I get the materials from a local supplier of equipment for the auto industry and this is a material intended for headliners with 2-3mm sponge behind. You have the same ones on Ebay.."headliner fabric with foam". Good luck with the works.
@rsgarage3529 Жыл бұрын
do i need to aplly the adhesive only on the headliner or is it required to aplly also on the textile material ?
@VDEdition1 Жыл бұрын
I apply glue on both sides, it's much better and safer.
@ernie4513 сағат бұрын
Where are you based so I can have this done
@ganjatokes3476 Жыл бұрын
Thanks homie🫡🙏🏼
@ganjatokes3476 Жыл бұрын
What kind of glue? And do you suggest mainly working from the inside out?
@VDEdition17 ай бұрын
Glue is Dunlop LP. You do everything as in the video and it's the correct procedure.
@jocedrummer1571 Жыл бұрын
Nemam nista protiv .. ali ti se brate mucis ..pisi mi u privatnu poraku da ti kazem neke dobronamerne savjete da sredis to za 2 3 sata .
@VDEdition1 Жыл бұрын
Ovako sam 100% siguran da se neće odlijepiti i do sada nije bilo nikakvih reklamacija. Prihvatam svaku kritiku, a i savjet je uvijek dobro došao. Ne mogu da nađem opciju da te direktno kontaktiram pa ću ti ostaviti svoj broj pa se možemo čuti preko viber-a ili WhatsApp-a 00387 61 323 351.
@_________Rema____________2 жыл бұрын
Pozdrav kakav ti je to nastavak na busilici i gde ima da se kupi ? I da li moze da se nanese lepak cetkom na celo nebo tvoje neko misljenje i iskustvo hvala !
@VDEdition12 жыл бұрын
Pozdrav. Nastavak za bušilicu imaš kupiti u svim većim prodavnicama koje prodaju alat. Što se tiče nanošenja ljepila četkom može i tako samo da ideš na što kraće etape jer ako ljepilo brzo suši onda moraš tako. Namažeš traku širine 10cm pa zalijepiš štof i sve tako dok ne dođeš do kraja. I nanosiš tanak sloj da nebi protopilo ljepilo kroz štof. Sretno
@_________Rema____________2 жыл бұрын
@@VDEdition1 Hvala ! :)
@ricardosachz49152 жыл бұрын
Your approach for this job is actually great !
@VDEdition13 ай бұрын
Thanks for the comment.
@heybridgelock8 ай бұрын
Dude, this video will have helped so many people and it'll definately help me. Nice one, all the best.
@VDEdition18 ай бұрын
I'm glad the video was helpful. Thanks for the comment.
@patrickwarden2933 Жыл бұрын
this is the Best video ever showing great techniques around overhead console where heights are way different and so tedious. His techniques are the only way and Great! Wish it was slower through that area process
@VDEdition1 Жыл бұрын
Thanks a lot. I'm glad the video will be helpful to someone. You can slow down the video in the video playback options. Greetings
@4ndy65 Жыл бұрын
great video very professional Im playing it safe with 3M non woven pads instead of the drill and brush attachment
@VDEdition17 ай бұрын
I'm glad the video was helpful.
@andreitoma93372 жыл бұрын
Hi, what kind of material are you using for the headliner? Is it the one with the foam on the back?
@VDEdition12 жыл бұрын
Yes, i used a fabric with 3mm foam.
@V_I_S_IАй бұрын
hey there what kind of wheel are you using to clean that old foam and adhesive off? looks like it works well
@VDEdition1Ай бұрын
I used a regular round steel brush.
@kbrick8821Ай бұрын
What is the size of the fabric you used if you remember? I know it is 3mm but the dimensions of it. Thanks
@VDEdition1Ай бұрын
You need 2 meters in length and a minimum width of 140 cm.
@filipmensak9783Ай бұрын
Hi, please can u tell me what kind of adhesive did u use on the edges, I mean that one from can u used to with brush, thanx
@VDEdition1Ай бұрын
I used Dunlop GP, although you can use any glue for the edges as long as it is heat resistant.
@stefanciprian428013 күн бұрын
Cum se dă ruloul jos de la trapa?
@VDEdition112 күн бұрын
Nu am inteles intrebarea?!
@stefanciprian428011 күн бұрын
@@VDEdition1 vreiam sa spun cum se demontează plafonul la trapa? Ala mic de umbra
@BrennanTrojan-me4qu Жыл бұрын
Very well done! What did you use to take the old glue off the headliner?
@VDEdition1 Жыл бұрын
Steel brush and sandpaper
@tiptopenterijerbrcko2626 Жыл бұрын
Odličan posao radiš. Radiš jako oprezno, savjesno. Jedan savjet, kada radiš oko plafonjere, uzmi industrijski fen inzagrij jako odozdo i laganije odozgo tj. materijal onda pritisni i istrljaj. Neces morati stavljati peškire, posude i utege.. Svidja mi se taj trokut sto zalijepis kada radiš oko plafonjere 17:25. To nisam radio, a sutra cu probati. I kakvo je to ljepilo?
@VDEdition13 ай бұрын
Hvala na savjetu.
@kerem_958 ай бұрын
If I do this, I need 1 week for this shit 😂👌🏼 who can do this on my golf 5??😂
@VDEdition18 ай бұрын
If you haven't done this before, it will take a few days to get everything back to how it was. I manage to finish everything in one day. Good luck with the works.
@rollsroycessАй бұрын
Sir, what kind of adhesive you use? The adhesive for the pistol compressor i speak ok? Thank you
@VDEdition1Ай бұрын
I used Dunlop GP glue.
@rollsroycessАй бұрын
@@VDEdition1 Thank you sir.Regards
@kantzler Жыл бұрын
Hello very good video. I will have the same journey ahead 😂 I am from Germany and I can’t find the Dunlop lp adhesive anywhere. Do you have an option where to get it?
@VDEdition1 Жыл бұрын
Thanks a lot. I don't know how to get Dulnop glue in Germany. Try to find this product, it should be available in Germany.. "3M Headliner & Fabric Adhesive" great option also comes in a spray. Two sprays can be to finish the headliner. Good luck with the works.
@jesusbenitezruiz128 ай бұрын
Do you disconnect the battery before doing this? I am scared of popping airbags.
@VDEdition17 ай бұрын
I do not disconnect the battery because there is no possibility to activate the airbags during disassembly. You can disconnect it if that makes you more comfortable. Greetings
@El_Pertita Жыл бұрын
Can i use the old fabric or do i have to replace it ? Amazing video btw.
@VDEdition1 Жыл бұрын
It is a canvas with a sponge behind it. Over time, that sponge burns and decays, and that's why the canvas hangs. To be able to glue anything, you have to clean the old sponge from the shell, and the canvas that is left is so thin that any glue you use will melt and be ugly. It is best to use a new canvas with a sponge. Good luck and thank you.
@El_Pertita Жыл бұрын
@@VDEdition1 thanks for the quick response
@El_Pertita Жыл бұрын
@@VDEdition1 one more question plz. I bought a fabric with 0,1cm thickness is it enough ? Thanks
@VDEdition1 Жыл бұрын
@@El_Pertita I think it's enough, just be careful with the application of the glue. Apply evenly and thinly and make sure that there is not too much glue in some places, which will eventually leak through the canvas.
@El_Pertita Жыл бұрын
@@VDEdition1 thank you so much man
@bogdanstanisavljevic8662 ай бұрын
It looks so easy when you do it. thanks for the educational content!! 💪
@VDEdition12 ай бұрын
Thank you. I'm glad the video was helpful.
@carlosarredondobosch41811 ай бұрын
All Golfs, Jettas and Passats have the same defect. The headliner falling down. What does the VW factory say?
@VDEdition111 ай бұрын
This is a problem with all cars that use the same type of material, headliner material with sponge. After some time, the sponge burns and then the canvas starts to separate from it. I did repairs on Peugeot, Renault, Citroen, BMW, Mercedes, Lancia, Opel, Škoda, Seat, Volvo, Alfa Romeo, Toyota, Land Rover, Audi, VW, etc. My channel has videos from almost all of these brands listed.
@carlosarredondobosch41811 ай бұрын
@@VDEdition1 I repaired my Jetta by removing the headliner plastic completely leaving the carton base celan, then I painted all the carton with vinilic paint exactly with the same light gray color.
@chchernobur1149 күн бұрын
Клей то какой
@VDEdition19 күн бұрын
Dunlop LP
@papichulo47228 ай бұрын
Bro does mk6 headliner fit into mk5 with all A, B, C pillar trim
@VDEdition18 ай бұрын
No, it doesn't fit. Although at first everything looks similar, believe me it's not.
@ricosnel886 Жыл бұрын
Als ik alles verwijderd hebt blijft het altijd nog iets of wat plakken Moet ik dat ook weg schrobben Of maakt dat kleverige niet uit Hij is verder wel netjes schoon
@VDEdition17 ай бұрын
Everything must be cleaned. If it cannot be scraped off then it is best to use nitro thinner to wash off the old glue.
@lloydsands6147Ай бұрын
Hi is the headliner shown in this video out of a mk6 golf? Just curious as it doesn’t have the cut out for an interior monitoring sensor
@VDEdition1Ай бұрын
The headliner in this video is the original headliner from this vehicle, the golf mk5.
@lloydsands6147Ай бұрын
@@VDEdition1 okay thank you
@lloydsands6147Ай бұрын
@@VDEdition1 do you know if a mk6 headliner would fit?
@Olchann2 күн бұрын
@@lloydsands6147 i believe it the mk6 will fit in mk5, only the mk5+ won't.
@DarkS0Ke10 ай бұрын
Lovely job! How much will it cost to do mine as well?
@VDEdition110 ай бұрын
Thank you. I think you'll have to find someone near you to do it. :D
@jeffelsliger727610 ай бұрын
What’s the actual colour of the headliner? I want to buy it but not sure.
@VDEdition110 ай бұрын
This is an original VW fabric. I don't know the exact name of the shade.
@jeffelsliger727610 ай бұрын
Ok Txs. I ended up buying a piece but it was slightly off.
@lavleo9053 Жыл бұрын
Meni uradili nebo i kad je mračno vide se 2 linije na sredini poprijeko, a kad je na svjetlosti sve izgleda ravno, znaš li šta može dovesti do toga, u čemu je fora? Pozdrav
@VDEdition1 Жыл бұрын
Pozdrav. Tokom ljepljenja su prevraćali materijal da nanesu ljepilo i na tim mjestima se spužvica "slomila" i ostali su kanali. Tu ne možeš ništa uraditi. Najbolje je ne dirati ništa. Pozz
@lavleo9053 Жыл бұрын
@@VDEdition1 Dobro sam im platio da mi odrade profesionalno, bez ikakvih vidljivih linija i bilo cega. Da li to mogu smatrati nekom njihovom greškom ili se ti tragovi smatraju nebitnim iako su vidljivi? Koliko je teško odraditi a da se ništa ne vidi? Hvala na odgovoru
@dejanstjepanovic50902 жыл бұрын
Koju diznu koristiš za nanošenje lepka i koji pritisak ti je potreban za špricu? Svaka čast.
@VDEdition12 жыл бұрын
Hvala. Kompresor koji koristim puni do 8 bara, a za diznu nisam siguran, morat ću provjeriti.
@evdbz11 ай бұрын
Hi, do you blow hot or cold air on it ? Thanks
@VDEdition111 ай бұрын
Hot air.
@poteznybyczek6816 Жыл бұрын
Kurwa jak zdjąć ta listwę z szyberdachu
@VDEdition17 ай бұрын
Jaki zespół konkretnie masz na myśli?
@ixx_5 Жыл бұрын
I opened it and couldn't get it back
@VDEdition13 ай бұрын
How is that possible?!
@TheOutlaw187 Жыл бұрын
Gutes video aber der sound bzw mal da mal weg nervt
@VDEdition111 ай бұрын
Danke für den Kommentar. Mir war nicht einmal bewusst, dass einige Teile des Tons entfernt wurden, wahrscheinlich aus Urheberrechtsgründen. Ich werde das beheben. Danke noch einmal.
@wanmohdfarid1834 Жыл бұрын
Hi, what type of glue that you put in air sprayer?
@VDEdition1 Жыл бұрын
Dunlop adhesive
@nilatac1152 жыл бұрын
Amazing work, what kind of glue are you using ?
@VDEdition12 жыл бұрын
Thanks. I used a dedicated dunlop headliner glue, resistant to high temperatures.
@Lehnhardt16 Жыл бұрын
Whats the adhesive product you used?
@VDEdition1 Жыл бұрын
Dunlop LP
@waldosaur2 жыл бұрын
did you disconnect the battery?
@VDEdition12 жыл бұрын
No need to disconnect the battery.
@ixx_5 Жыл бұрын
Please what type of glue
@VDEdition1 Жыл бұрын
Dunlop LP
@saturnmorning2 жыл бұрын
You are the master! Thank you!
@VDEdition13 ай бұрын
Thanks for the comment.
@oliv2760 Жыл бұрын
bonjour tu la acheter ou ton tissu ??
@VDEdition1 Жыл бұрын
I buy a new fabric with a sponge and install it.
@maxproduction76534 ай бұрын
Imaš li link od ljepila?
@VDEdition14 ай бұрын
Dunlop LP
@maxproduction76534 ай бұрын
@@VDEdition1gde ga mozes kupiti... Dali bi bio pattex universal classic dobar ili ne za taj posal...
@Ralee-gp8rk Жыл бұрын
koj lepak koristis
@VDEdition1 Жыл бұрын
Dunlop adhesive
@bionikl3311 ай бұрын
the best.
@VDEdition111 ай бұрын
Thanks a lot.
@Scramblerkidd Жыл бұрын
Very very nice!
@VDEdition17 ай бұрын
Thx! 👍
@Saulcardoso Жыл бұрын
Great work!
@VDEdition1 Жыл бұрын
Thank you. I'm glad if the video was helpful.
@lpautomotive4007 Жыл бұрын
Awesome work
@VDEdition1 Жыл бұрын
thank you
@andreachiappa633410 ай бұрын
La musica stressante che hai messo rompe proprio le scatole e sminuisce il tuo bellissino lavoro