This is most common case of steering lock defective message in dashboard on vw passat b6. However also known is that steering lock control unit is prone to fail to, this unit known as convenience control unit. So a diagnostic check with an scanner is require to understand the exact cause of message being displayed. To be noted that control unit usually fails due to a faulty steering lock, and in this situation both have to be replaced. As for steering lock we always advise to have a new unit convenience unit can be replaced with an used one as long as there are no internal faults registered in its memory.
@killiangoliath29797 ай бұрын
What is the part number
@johnwickbitch12983 жыл бұрын
Should have showed us how to take the steering column out
@SorinLeucuta2 жыл бұрын
Hello. What would we need in order to reprogram a unit (equipment and knowledge) if we don't know anyone that can do it for us? 3:05
@Lexx19945 ай бұрын
Hello, thx for the video, well explained. I think I have the same problem, only it's not that worse. Sometimes my engine cranks for some seconds but it eventually starts, sometimes it starts right away with no problem, sometimes it starts and I get yellow spring with engine problem, visit workshop or steering column lock defective and it turns off immediately, but 2nd time it starts. Lately it starts but shuts down right after, but if I clear the codes with an obd reader it starts and run with no problem. The faults I'm getting are electronic steering column lock control module j764, electronic steering column lock check sum error and steering column lock enabling for electronic ignition lock. Could it be some bad wiring since sometimes it runs with no problem and sometimes it gives this errors but still runs?
@jamesthuku93704 жыл бұрын
Hello can I reprogramme a used steering lock to another car?
@s-jettatggg59232 ай бұрын
Можно
@denisakarchnakova433 жыл бұрын
Hi I Hot a B6 it’s says on dash steering wheel column but I start car fine but like every two months drains my battery could be issues with steering wheel column?
@dashtyATG3 жыл бұрын
Hy that's a good video I'll checking 2018 blad key 2mo i guess it's gonna be the exact same issue. And specific code before i scan it
@salvadormurillo90195 жыл бұрын
hello if ireplace the stering colum for a used or new do ineed to reprogram it
@dattakale64056 жыл бұрын
Hi I Got 2010 vw pasat 2.0l diesel, evertime when I stopped engine after 30sec.I get massage on dashboard saying Steering column lock!visit workshop!,what could be the issue is?
@krishnademonteverde61593 жыл бұрын
how much is the cost to repair with the same issue.Thanks
@antonantonius49962 жыл бұрын
hi , you still working ?
@tundebadmus82582 жыл бұрын
can I programming the steering lock
@nioo23174 жыл бұрын
Hi What is price repair steering lock defective VW Passat B6
@killiangoliath29797 ай бұрын
Whats the part number of the efc
@xxxl1055 жыл бұрын
Hi, I have a question, if after replacing this electric steering lock you connected the computer to code. Greetings
@ubreakitirepairit3569 Жыл бұрын
Clearly this uploader doesn't respond to any of it's commentators.
@alext66755 жыл бұрын
what is the specific name of the unit? in english..i have problem finding .
@jcoburn35905 жыл бұрын
If you still need it, Part Number 3C0905861J. Good luck! 😉
@slinbi7 жыл бұрын
In my car is intermittent, just need to remove key and fine
@bsamsungsamsung14454 жыл бұрын
Why you are not telling about first key and the problem if YOU DON 'T FOLLOW STRCT STEPS.??????????? Is a procedure who need strict steps to follow....DISLIKE.
@mostafarezk14317 жыл бұрын
this message appear in my car please tell me how to solve this proplem