VW T5.1 Rear bumper removal and repair - Transporter, Multivan, Caravelle ....

[@andrewrobinson9453]

Great help to me thankyou

[@YoucandoitwithJules]

Pleasure. You can do it 👍

[@jamesharris9029]

Very good, well done.

[@YoucandoitwithJules]

Thanks for the feedback. You can do it 👍

[@bradfordgoerss3242]

although I may not be the first comment....hahaha....well done again mate.

[@YoucandoitwithJules]

Thanks for the first genuine comment on this video . You can do it 👍

[@vojty92]

Thanks, I just have one little problem. Those plastics screws (time 2:18) are impossible to unscrew, because they're old and dirty. Is there any trick for it?

[@YoucandoitwithJules]

You can get a flat screw driver and jam in the hole and twist it like that. You’ll need new ones to replace. Hope this help. Let’s us know how you get on. You can’t do it 👍

[@davejewitt4231]

Another option is to wind in a woodscrew about 2/3 turns and pull the screw with molegrips and the whole plastic fitting pops right out in a one-r@@YoucandoitwithJules

[@Graeme-hn6ic]

How do I get the reinforcement beam underneath the bumper off? I've bent it - a bit! G

[@YoucandoitwithJules]

That's a tough one without seeing it. You have to get to the 4 bolts holding to the body. You can do it 💪

[@marynajacobs7538]

Amazing how crappy the design of cars are these days. Not strong at all. One bump and all has to be replaced. Those clips can break so easilly.

[@YoucandoitwithJules]

Yes totally agree. It's all crap design these days, made to fail. You can do it 👍

[@mitchellmayo2578]

🙈 ᵖʳᵒᵐᵒˢᵐ

[@pascoi8641]

Thanks for that mate, gonna help loads with fitting a new tow bar 👍🏻

[@YoucandoitwithJules]

Thanks for the feedback. You can do it.

[@pascoi8641]

@@YoucandoitwithJules haha all sorted buddy, new tow bar and electrics sorted! Piece of cake 😜👍🏻

[@YoucandoitwithJules]

@@pascoi8641 It’s lovely when it all goes to plan. You can do it 👍

[@mattketteringham7006]

Thanks for this bud. Just a couple of notes (and these might be model specific - I’m running a t5.1 Caravelle LWB); under the wheel arch liners I found another T20 screw each side, about 30mm higher than the top arch liner screw. Got to it easy enough by bending the wheel arch out of the way a bit. Thinking they might have been missing from yours as they screw into the bit of black plastic that leapt for freedom as the bumper came away on the passenger side. Also, my van had two additional plastic screw thingies hidden under the small plastic rear corner panel. Easy enough to spot, but they weren’t there on your van so I thought I’d let you (others?) know. Thanks again for taking the time for the video, and all the others! Makes my life soooo much easier 😂

[@YoucandoitwithJules]

Thanks for the fededback. You can do it :)

[@toy578]

yes thanks, l can do it!

[@YoucandoitwithJules]

Thanks, Let us know how it goes. You can do it. ;)

[@davejewitt4231]

Spot on, thank you

[@YoucandoitwithJules]

Thanks for the feedback. Keep us posted. You can do it :)