VxLAN Basics & Configuration on MikroTik

[@ishmeetbhatia3038]

Nicely explained!!

[@MankomalSingh]

Thank you! 🙂

[@umiseaz]

great keep in on

[@MankomalSingh]

Thanks umiseaz for your feedback!!!

[@johnchapman1395]

bro you're doing the lord's work. much appreciate these videos

[@MankomalSingh]

I appreciate that

[@Gamefire712]

It was really a great lecture and really impressive work.!

[@MankomalSingh]

Thanks for your feedback!!

[@fernandopaucar5362]

Need help what ip should I assign in virtual pc and what is the gateway in ether2?

[@mkurniafahari8457]

greatest explained🔥

[@MankomalSingh]

Thank you Fahari, appreciate your feedback

[@JD-em3hg]

Great video! If I needed to determine the max number of remote VTEP supported by a Mikrotik router and the MAC table size associated to each remote VTEP, Where can I find the information?

[@MankomalSingh]

Hello, Sorry havent dived so deep into it will love to but just havent found the application to put that to a wide usage to be honest

[@mrhutchinsonmn]

I am only familiar with Aruba VxLAN, where vlans are configured as virtual networks and the vni contains the vlan ID as well as the destination IP. Am I understanding your Mikrotik example, that if port 2 were connected to a vlan trunk port of a switch with many vlans that all of the vlans would traverse the tunnel without also being configured on the Mikrotik devices?

[@MankomalSingh]

They will have to be configured then only they will traverse

[@mrhutchinsonmn]

@@MankomalSingh Thanks for the reply. Shortly after my comment, I found that my understanding was correct. I have 2 tunnels working perfectly right now. I appreciate the tutorial!

[@MankomalSingh]

Glad it was helpful.

[@Problembaer4]

As far as I understand, each VXLAN segment can handel 4094 VLANs. How can I configure that VLAN1x1 belongs to VNI1 and VLAN1x2 belings to VNI2?

[@MankomalSingh]

Haven't tried this but you could try to add multiple VTEPS to same IP and see what happens. Again I have not tried this I have explored this from the surface so may be some trial and error will help.

[@tsv1991]

What about EVPN? Without EVPN this is the useless feature.

[@MankomalSingh]

Yea, that is not yet a feature AFAIK.