W25Q FLASH Memory || Part 9 || External Loader in SPI Mode

[@amilcarcarranza9580]

Hello!, thanks for your videos, I found in my workshop old boards with tft, stm32f103 and w25q16vsiq. I'm actually learning to use LVGL, and it works fine, but with ram at 95%, so I'm waiting for your new video. It's the first time I use this memory, and found your videos very useful for that.

[@mohammadalinajafi1791]

Hello I executed your method from the same ic W25W16 and the stldr file was executed according to your example. But when I want to program the bin code, I get the following error. What is the cause? 17:22:58 : File download complete 17:22:58 : Time elapsed during download operation: 00:00:01.321 17:22:58 : Verifying ... 17:22:58 : Read progress: 17:22:59 : Error: Data mismatch found at address 0x90000000 (byte = 0xFF instead of 0x32) 17:22:59 : Error: Download verification failed

[@hareeshs86]

Hello. I am creating an external loader following your tutorial for the STM32U599 and W25Q32 flash IC. I am able to read and erase the external flash using cube programmer, but whenever I try to write to flash (Fill Memory), I get the following error 15:51:42 : Error: Failed to download data! If it's a Flash memory, it may be not erased or protected 15:51:42 : Error: Failed to fill memory with the given pattern Similarly, when I try to program a bin file to flash I get the following error 15:55:36 : Error: failed to download Segment[0] 15:55:36 : Error: failed to download the File 15:55:36 : RUNNING Program ... 15:55:36 : Address: : 0x90000000 15:55:36 : Warning: The core is locked up 15:55:36 : Start operation achieved successfully

[@dantonpereiradasilvajunior9743]

I follow the previous vídeos about W25Q but there was no gpio.c and spi.c (same for .h files). Where did they come from?

[@ControllersTech]

Its the same project, just the files are generated separately. Check 2:13

[@ricardo-rector]

Hello!! This videos really help, so now i has Flash loader on IDE, but i dont know if si possible boot program from External Loader on SPI.

[@ControllersTech]

You can give it a try. I don't think it will work because of limited speed but it worth a shot.

[@medvidekkrupicka1404]

Hello! How do you create the voice.over in your videos? I really like the sound of the TTS engine. How is it called? Any link, please? Neverheless, I really like your videos. Mant thanks!

[@ControllersTech]

Its amazon polly.

[@medvidekkrupicka1404]

@@ControllersTechMany thanks for letting me know!

[@HasanHarati-g4w]

please tuterial create .flm file for spi 😟