#104

  Рет қаралды 136,584

w2aew

w2aew

Күн бұрын

Пікірлер: 420
@clarencegreen3071
@clarencegreen3071 7 жыл бұрын
I taught basic electronics for 33 years and I tip my hat to you - you are an excellent teacher!
@w2aew
@w2aew 7 жыл бұрын
Thank you, that means a lot to me.
@VoidHalo
@VoidHalo 5 жыл бұрын
I got into electronics less than 2 years ago, though I'm in my 30's, but I was thinking how fortunate I am to have such an abundance of wonderful resources like this to make learning it so much easier. Especially given that I can't read anything more than a couple of paragraphs without a great deal of difficulty. And I can't follow written descriptions of how circuits work for the life of me. But it's hard to find a channel that doesn't dumb down or omit content or keep their videos short so people won't be scared away. I honestly don't think I could have learned about EE without people like this guy.
@denisvallecilloosorno7355
@denisvallecilloosorno7355 4 жыл бұрын
Vaya Lástima que no viene traducido al español
@olinfeil2784
@olinfeil2784 4 жыл бұрын
Clarence Green the best results that ive ever had was by following the Gregs Electro Blog (just google it) definately the most incredible info i've followed.
@KCLIBURN-mj9qx
@KCLIBURN-mj9qx 5 күн бұрын
I love watching when EE's get bored and play around........Such simple yet functional application, I've never seen a sawtooth gen. with adjustable pos. and neg. slope. Thanks again Alan for demonstrating your talents and teaching skills.
@zainulabidin1507
@zainulabidin1507 5 жыл бұрын
When you break electronic circuits down in different blocks like you did. Then life becomes a lot easier. You are an excellent teacher.
@ses4068
@ses4068 4 жыл бұрын
One day you will discover that you can apply this to ANY problem you face in life...
@sanjayd411
@sanjayd411 3 жыл бұрын
I have an MSEE degree from a university in the city of Chicago and have been an engineer for the past 30 yrs. I can tell you that none of my professors taught circuit design like you do on this channel. Kudos to you. Please keep up the great work. I’m still learning from your channel. Many thanks to you sir! 👍
@w2aew
@w2aew 3 жыл бұрын
I think the problem is that many professors have never, or have forgotten how to design and build actual operating circuits on the bench - where the process is often a mix of known building blocks, intuition and rough order-of-magnitude design - rather than the rigid theoretical / mathematical approach.
@sanjayd411
@sanjayd411 3 жыл бұрын
@@w2aew I completely agree. I learned more about designing and building circuits in the job while working than what I learned while in school. Btw, I too am a HAM…de KG9FA. Very pleased to meet you. 73!
@w2aew
@w2aew 3 жыл бұрын
@@sanjayd411 Nice to meet you too - hope to catch you on the air one day!
@jonahansen
@jonahansen Жыл бұрын
Great exposition using the minimum needed configuration without all the embellishments to improve accuracy and independent variability of frequency and slopes, etc. Fantastic - I always had trouble with diode bridge switching...
@erikisberg3886
@erikisberg3886 Жыл бұрын
My sincere compliments for Your ability to teach! Was a joy to watch, from an old EE.
@mardav1545
@mardav1545 3 жыл бұрын
I am retired from carpentry and decided to try and learn about electronics. Out of all the videos I've watched, you explain things in a way that I can understand. Thanks and keep up the good work.
@chuckjls
@chuckjls 2 жыл бұрын
These simple, fundamental analog circuits are all miniaturized and etched into ICs. It's so great that you are explaining these circuits and how they function. I recommended these videos to a lot of my new interns and junior engineers. Application notes from IC vendors and mfg. leave out a lot explanation due to proprietary restrictions. You are doing a great service to future engineers and some of us old timers who need a refresher. Cool test bench. Our lab custodian at work freaks out when we leave a probe out.
@patprop74
@patprop74 7 жыл бұрын
I feel like I should be paying you for the teaching! you really explain in a way that fun and easy to learn. Thank you
@adrianwong26
@adrianwong26 3 жыл бұрын
I also feel the same. Will w2aew have a course one day?
@roladun
@roladun 5 жыл бұрын
I felt compel to say you simplify things to the point that it makes me feel lazy brain-wise. How I wish that switching circuit 5:24 is a puzzle for us to decode before you explained how actually it operates. I feel like I am cheating getting answers easily. This is one of the rare KZbin channels that even if one knows nothing about electronics you can still watch and enjoy learning something and feel accomplish for the day. Thank you so much for your teaching.
@larrybud
@larrybud Жыл бұрын
Fantastic! Dang I love how you break down circuits.
@ZeedijkMike
@ZeedijkMike 7 жыл бұрын
I have watched this video 4 or 5 times and find it facinating every time. Simplicity and versatility in the same circuit.
@Daniel456324
@Daniel456324 2 жыл бұрын
Long time ago I bought some Signetics NE566N function generator, has built in sawtooth and squarewave output with dc offset. This video sheds light on how it operates. thank you
@KCLIBURN-mj9qx
@KCLIBURN-mj9qx 5 күн бұрын
You can do a LOT of things with the venerable ole' 555 / 556. Genius design.
@MC-fk4vb
@MC-fk4vb 6 жыл бұрын
Best teacher on youtube! I've been enjoying and rewatching a lot of you're videos for a while now. They're great. Thanks for taking the effort of making them!
@yasirfaizahmed2003
@yasirfaizahmed2003 5 жыл бұрын
This channel is so underrated, Deserves a 1B subs!!
@TheLucky066
@TheLucky066 4 жыл бұрын
So true
@hadibq
@hadibq 2 жыл бұрын
It's already exceeding that... A viewer interested in electronics of this level is worth 10k its equivalent of a purring cat video viewers 😀
@kevinkrieg99
@kevinkrieg99 4 жыл бұрын
Alan, your videos are amazing. Thank you. I built this circuit in a night and even modified it slightly to replace the current source and sink diodes with green LEDs so I could see when it was on. Running off a 9V battery and works like a charm with an opamp I had on hand. I had a lot of fun adjusting it, learning what each component is responsible for, and the limits.
@w2aew
@w2aew 4 жыл бұрын
Perfect! I am so happy to hear that my video inspired you to build, test, learn!
@tomaszwota1465
@tomaszwota1465 3 жыл бұрын
I've watched these videos (this and the previous one) a couple of times now, I'm new to the hobby and it took a while to get it. Thank you, they are so beautifully crafted, best teaching material I've seen in a while. The different versions of the schematic, high-level to component-level, that was great and it opened a door in my mind I never knew were even there! It's starting to look like hardware programming (I'm not new to programming), and I guess that's a good thing, because I'm not afraid of programming and was very much daunted by circuit design! Still am, but your videos are helping so much! Thank you for going so deep into this circuit which is by no doubt pretty much trivial to you. I appreciate every minute of it, always to the point, no unnecessary padding, distilled essence of what needs to be said.
@DigitalbearDan
@DigitalbearDan 11 жыл бұрын
At the risk of become yet another echo among the legions, I cannot resist expressing my gratitude for this selfless sharing of your most impressive knowledge. Your mind is not only acutely versed in electronics theory and practice, but possessed of a powerful gift for transmitting that knowledge to others with an equal degree of skill. I learned at great cost, after even greater frustrations, that I am a solidly visual-kinesthetic learner. Such labels proved to be of little value
@DigitalbearDan
@DigitalbearDan 11 жыл бұрын
in the classroom, however, it DID allow me to seek those learning modes and materials of most benefit. My point being, you not only present what you are discussing visually, via this you-tube channel, but your words (though an obviously auditory element!) paint powerful images, regardless of intention. For this I thank you. I take learning VERY seriously. So your gift is golden to me! -Dan in Chicago
@electron_
@electron_ 3 жыл бұрын
You are a database of electronic knowledge on the entire YT. Your amazing project rewind me back in the days when you could see such great ideas only in the HUM RAdio magazines. Respect! Thanks!
@rish1459
@rish1459 6 жыл бұрын
I am so glad you walked through that in the manner you did. That is exactly how engineers think when designing circuits. Basic fundamentals to Functional blocks (usually add specs) to tools in the toolkit to Proof Of Concept. Then the fun of debugging those parasitic and/or unintentional effects (e.g., the diodes don't all switch at the same time, temperature drifts, etc. etc.) You should do one on using a transistor's PN junction as a fast (low charge) diode.
@emcgon
@emcgon 11 жыл бұрын
I don't know if you are a teacher by profession but if not you missed your calling: you really have a gift for explaining things in a clear and interesting way. I love the format your videos: a little bit of theory followed by a practical demonstration. Thanks (again) for taking the time to make these videos - I am always looking forward to the next one and I always learn something or take away a new idea from them.
@VoidHalo
@VoidHalo 5 жыл бұрын
I know I've already commented, but I just wanted to say how much I appreciate you taking the time and effort to make these videos. I have a really hard time reading and can't follow written descriptions of how circuits work for the life of me, so channels like yours end up being a huge help. I really don't think I could have learned electronics without people like you putting up these sorts of videos. I spent 20 years trying to find my niche and thanks to people like you, I've been able to find it. Cheers.
@erflb
@erflb 4 жыл бұрын
I've been studying and working with Electronics for almost thirty years and I never thought of something so great and at the same time, simple. Thank you very much!
@argonman1
@argonman1 6 жыл бұрын
Well, you just got another subscriber. I'm currently trouble shooting a Wavetek 186 phase lock generator from 1980 and you have described their block diagram design almost perfectly. Very helpful, thank you!
@fer_fdi
@fer_fdi Жыл бұрын
Very cool circuit beautifully explained, thank you!
@sylvainduteau9780
@sylvainduteau9780 10 жыл бұрын
Very good tutorial. Simple basic analog circuit yet but used in most electronic integrated circuit. Analog circuit can do any kind of mathematical operations; sum, substraction, log, square root, etc... As we know, digital calculation is much easier to excecute, but analog worl makes it so much insformative as you demonstrated it!! Keep going your nice work Sylvain
@stevegrande1698
@stevegrande1698 4 жыл бұрын
I have been a technician for over 40 years and never worked on a circuit where a bridge is used as a switch. Excellent description of voltage drops and current sources. It is great to see that students today have this medium to use as a reference to understand the work they are doing in the lab.
@carlranson9160
@carlranson9160 9 жыл бұрын
Fantastically clear description. thank you. I never quite got the hysteresis thing until you mentioned that the feedback resistor is effectively in parallel with one of the other two. The light bulb is now on!
@w2aew
@w2aew 9 жыл бұрын
Carl Ranson I love those ah-ha! moments when the light bulb goes on! Thanks for sharing!
@PORRFNK
@PORRFNK 9 жыл бұрын
***** Thank you so much for this, I have been looking to find good explanations for how to diy something like this for fun. Do you have other oscillator designs? How do I add linear voltage control to the frequency?
@w2aew
@w2aew 9 жыл бұрын
A. Bob You can design a simple circuit that varies the current source values as a function of voltage. Maybe my video on current sources will help. I have some other videos on oscillators, here's a simple search URL: kzbin.infosearch?query=oscillator
@PORRFNK
@PORRFNK 9 жыл бұрын
Hi, I was thinking of other designs like quadrature oscillators etc.? Thanks, I will take a look at the other video :)
@LordPhobos6502
@LordPhobos6502 3 жыл бұрын
A long while ago, back when we had to walk 15 miles to goto school (and it was uphill both ways), I was told of a motor control circuit. Instead of just basic PWM, where the mark to space is changed for a constant frequency, it had a constant mark, but variable space, to ensure the motor did not draw too much current while building up speed. This can be used as a constant mark (or constant space) driver! Thankyou for this video, I learned a lot of new things, and I'm going to have fun playing with this in the workshop 😁
@louco2
@louco2 7 ай бұрын
Love your ability to explain complex stuff in such a short time Alan, amazing little circuit condenses a lot like yourself!! hihihihi
@duperdude25
@duperdude25 11 жыл бұрын
You have a gift for teaching. Please keep it up. I'm doing schematics but mostly on digital interfaces, very little analog, and I really enjoy your channel, brings memories back.
@maxsnts
@maxsnts 11 жыл бұрын
This brigs back memories... You remind me of the best analog teacher that i had! Simple and concise circuits that present the fundamentals! Very very cool.
@landus94
@landus94 11 жыл бұрын
Amazing job you've done here Sir! I, as a beginner really appreciate these kind of explanations for simple building blocks in electronics. It would be great to see videos like that more often, but I understand it takes time. Thank you again!
@emcgon
@emcgon 7 жыл бұрын
What an elegant and beautiful circuit. I would never have thought of using the diodes as a switch in that way.
@ele4853
@ele4853 4 жыл бұрын
Great job! Very well explained together with the hand write notes. Clean, well organized and easy to understand. Thank you!
@Jez4prez
@Jez4prez 11 жыл бұрын
I'm studying electronics myself and your videos are invaluable to me :-) You explain more applicable applications that my teachers never seem to cover. Most of my teachers are so bogged down in maths and the theoretical I often think they do it purposely to confuse us students. I think they've all been stuck in the Academia world for far too long haha.
@TerminalJack505
@TerminalJack505 11 жыл бұрын
Brilliant. I forgot about the diodes-as-a-switch trick. It was something I learned from a lecture but never used or saw demonstrated.
@ruijacinto8225
@ruijacinto8225 6 жыл бұрын
You made me nostalgic I was a young engineer at fifths decade when the electronic was so beautiful and we assisted the first steps of solid state; congratulations you are a very good communicator I enjoyed to review matter almost lost by the gadgets era
@ernestb.2377
@ernestb.2377 Жыл бұрын
Really nice these small but interesting and educational circuits, and you do a tremendous great job of explaining the working principles. Keep it coming 🙂 and we will build and play..
@Hovvman
@Hovvman 3 жыл бұрын
This video brings back fond memories of my first circuits lab in college where we breadboarded a simple pong game played on an oscilloscope in XY mode using a similar technique and some analog multiplexers for sequencing between the ball and the paddles. Thanks!
@educationdz202
@educationdz202 9 жыл бұрын
This is actually a really nice way to introduce proper easy and useful circuit design .. many thanks
@vertamps
@vertamps 10 жыл бұрын
I love everything about this circuit, multiple basic building blocks with good working theory throughout there use. After recent peering of IC designs i have decided people who design analog IC's are some of the smartest people in the world, microprocessor designers a distant second.
@w2aew
@w2aew 10 жыл бұрын
Thanks - glad you liked it!
@vertamps
@vertamps 10 жыл бұрын
***** I threw together an LTspice simulation of your circuit. Here is the download link if anyone finds it useful to play with. www.filedropper.com/sawtoothgen
@gotbread2
@gotbread2 9 жыл бұрын
I never thought about using the diode bridge as a switch. Simple but brilliant! Will use this in the future instead of shuting off the current sources
@cugoman
@cugoman 11 жыл бұрын
I watch your videos when ever I feel like I need to learn something new ..
@chrisengland5523
@chrisengland5523 2 жыл бұрын
Wow! I loved the bridge rectifier switch. I graduated in electronics umpteen decades ago (now retired) but somehow never came across that simple, yet brilliant idea. (You're never too old to learn.) And of course, extremely well described as usual.
@darlingtonpear940
@darlingtonpear940 11 жыл бұрын
Great take on a relaxation oscillator (sans 555) and a very clean triangle! You've got me thinking about how to vary the frequency and amplitude now, too. Excellent explanation, Thanks!
@equalcrimeequaltime
@equalcrimeequaltime 2 жыл бұрын
Your videos are great! I was getting a headache trying to figure out how to calculate the the linear charge of capacitor which I've figured out is t =VC/I, where frequency is the reciprocal of t (1/t), because I wanted to get the frequency of a PWM thing I'm doing. BTW, most of what I've learned about current sources and generating waveforms was from these videos. You're a great teacher!
@kcbanner
@kcbanner 4 жыл бұрын
Thanks for the explanation of the schmitt trigger behavior - it hadn't clicked with me that those resistors become effectively parallel with ground/vcc, cheers!
@DtMN3RD
@DtMN3RD 4 жыл бұрын
Something has to be SERIOUSLY wrong with you to see a tutorial of this high clarity/quality and still give a "thumbs down". Really.
@charliesumrell7590
@charliesumrell7590 4 жыл бұрын
Excellent explanation of three basic useful circuits.
@monolito8556
@monolito8556 7 жыл бұрын
Man I swear this must be the only vid that explains the basics of capacitor on constant current source , and the whole design for a variable ramp wave generator , really grateful for the sharing, one question, how would you solve the problem without the diode bridge, which I also learned in this vid, thanks again
@w2aew
@w2aew 7 жыл бұрын
If you didn't want to use a diode bridge, you could add some circuitry to directly turn on/off the current sources.
@Avrora707
@Avrora707 2 жыл бұрын
Thank you so much! Very interesting. I found that video because I am trying to find how works generator for horizontal deflection in oscilloscope. Regards from Ukraine!
@w2aew
@w2aew 2 жыл бұрын
Yes, many horizontal sweep generator circuits use the same principle of a constant current source into a capacitor to make a linear voltage ramp.
@Avrora707
@Avrora707 2 жыл бұрын
@@w2aew Thank you for your answer! Yes, I know the main principle, but I have a lot of trouble with synchronization, because generator should start its voltage ramp with the input signal and it is difficult for me to design. I want to make simple oscilloscope using B13S6 CRT. Now I design DC power supply and next will be horizontal generator
@w2aew
@w2aew 2 жыл бұрын
@@Avrora707 This is the function of the Trigger circuit. Keep the timing cap shorted (via a bipolar or FET) until the trigger condition is met, then turn off the shorting transistor and let it ramp. At the end of the ramp, short it again then wait for the next trigger event...
@Avrora707
@Avrora707 2 жыл бұрын
@@w2aew yeah, you accepted my thoughts about it👍 and now I am sure what I need to achive. For current moment I have designed simple schematic to try. I see two difficult tasks: it is need to have two modes - auto and wait, and second it is need to have good waveform on frequencies up to 1 Mhz. Ok. For that moment I have enough information, so I need to try it. Thank you so much for your help🙂
@forbearcali
@forbearcali 11 жыл бұрын
Phenomenal tutorial! Inspiring and informative. I hope youtube pays you one day
@Edgarbopp
@Edgarbopp 2 жыл бұрын
This was fascinating and well explained. Thanks!!
@arenotdiy
@arenotdiy 4 жыл бұрын
You are awesome for putting this out! Beautifully explained and simple, gives me great ideas for my DIY synthesizer. Gracias!
@ke9tv
@ke9tv 10 ай бұрын
Nice explanation. I might have added a speedup capacitor on the comparator, particularly if I'm going to use the square wave output (this is a nice variable-duty square wave circuit as well as a triangle generator). 47 pF in parallel with that 3.9k feedback resistor should tame any glitches at the transitions.
@espennyhaug2716
@espennyhaug2716 2 жыл бұрын
Very good video. Keep up the good work.
@bhavani1089shankar
@bhavani1089shankar 8 жыл бұрын
i found the same circuit (not as detailed as this) but in an abstract form i.e with two constant current sources (one is sink) and with hysteresis in Design with operational amplifiers and analog integrated circuits by Sergio Franco and thank you W2AEW for making me understand Franco better
@w2aew
@w2aew 8 жыл бұрын
Yes, this is (was) a very common basis for analog function generators years ago. It makes a very good example for the application of current sources, diode switching, and schmitt trigger (comparator with hysteresis).
@MsMammeta
@MsMammeta 6 жыл бұрын
I've never saw a more interesting channel on youtube. :)
@YoungPebble
@YoungPebble 7 жыл бұрын
Please keep making these kind of tutorials. I love them.
@octavmandru9219
@octavmandru9219 7 жыл бұрын
Thank you again for this nice circuit. I build it last night straight on a perforated board and it works perfect. I used sockets for capacitor so i can have some flexibility in the range and an SMD rectifier bridge. Sometimes I feel the confirmation of the breadboard is needed, but thanks to your clear explanation I didn't have to. Great addition for my beginner's lab! (Well, I have a Chinese scope with built in DDS but this is small and battery operated)
@GaryMcKinnonUFO
@GaryMcKinnonUFO Жыл бұрын
Great teacher, liked and subbed :)
@yeetshea
@yeetshea 11 жыл бұрын
Thank you so much! I have been wondering how to create a variable frequency sawtooth generator for audio applications for a while now. Thanks for being awesome!
@MilanKarakas
@MilanKarakas 11 жыл бұрын
Brilliant! Simple and effective. Thank you for sharing your knowledge with us.
@GiNodrog
@GiNodrog 2 жыл бұрын
Hi , nice to see a detaild information about cct's . Just for information and possibly a lazy approch ! Ive built saw tooth generators with Shmit triggers . I.e recently used CD4096 quad two input Nand . (Resitor in feedback and cap to ground ) the wave form accros the C is roughly triangle (but as you know can be controlled with diodes in the feed back to alter the mark space ratio) . With the 4096 the input impedence is high , so use a FET to sample the capacitor's wave. Yes I see your way would give better liniarity, but I just needed to control sound effects.
@billywallace1360
@billywallace1360 4 жыл бұрын
I've been looking at an NE566 I found in my parts box. After watching this video, the block diagrams of that chip showing current sources, a schmitt trigger and square and triangle outputs suddenly make a lot more sense.
@cbuser1000
@cbuser1000 5 жыл бұрын
Superb video , I've watched most of your videos and all are Top notch , Both in quality and understanding 👌👌👌 ... Thankyou .
@einball
@einball 11 жыл бұрын
Your videos are so simple yet so awesome! Keep up the awesome work! :)
@PapasDino
@PapasDino 11 жыл бұрын
Yep...just thought it would be easier for a viewer to take print your page and then make their own notes around the circuit as you discuss them. TNX again...learn a lot from all your videos. 73 - Dino KL0S
@jj74qformerlyjailbreak3
@jj74qformerlyjailbreak3 2 жыл бұрын
Sir. You earned a new Sub today. Please celebrate by watching the virtual premier 2kmules tonight @8pm EST. Think of it as Virtual Ground the way we set up Hystireeeeesis between major platforms and MSM. Great lessons here. With your video. Great lessons in the one mentioned above as well. God Bless.
@indigoskywalker
@indigoskywalker 6 жыл бұрын
Love watching your tutorials, excellent delivery as always!
@acluster3411
@acluster3411 3 жыл бұрын
You are a great teacher, very well done.
@321reh
@321reh 11 жыл бұрын
Circuit Fun??? Could Be The Start Of A New Series!!! A Incredible Design From A Incredible Engineer!!! Very Good Explanation,,,,Thanks Alan,,,Best Regards RICK
@markbell9742
@markbell9742 11 жыл бұрын
Hi Alan: Thanks, I like your step-by-step approach as you isolate and describe (verbally, visually and mathematically) each functional section of a circuit. I plan to give this one a build. Could you provide a tutorial on: ‘rail-to-rail’. I do not have a good understanding of what the implications are for circuits and components. Cheers, Mark
@Zootalaws
@Zootalaws 10 жыл бұрын
Really well explained - even for a noob like myself. Thanks very much for taking the time.
@N4ppul4
@N4ppul4 5 жыл бұрын
Great! If im ever going to make a noise/signal generator this would be awesome addition.
@cescofran6165
@cescofran6165 3 жыл бұрын
Now I know how to set the value of a hysteresis resistor, thank you.
@Enigma758
@Enigma758 2 жыл бұрын
Just to change things up a bit, could a couple of transistors replace the four "switch" diodes?
@simonr6982
@simonr6982 8 жыл бұрын
Ok I have a good question... how would you configure this so when changing the slope on the rising or falling edge it doesn't change the frequency ?! I thought that maybe using a long tailed pair in its differential mode will be a good way to achieve that so each collector on that pair control one of the current source (falling/rising) while keeping a balance between the overall current (tail current) which dictate the frequency. But after that, how can you turn this into a variable frequency oscillator without affecting the shape of the slope ? I thiknk that maybe by varying the tail current (using a adjustable current source) on the long tailed pair this will change the overall current without affecting the ratio between the the rising and falling edge of the slope (but maybe its a sloppy solution especially if you want to have a wideband oscillator). So I put this on paper and I might have something but yeah I have some hard time at this point to see how I can correctly connect this without loading the differential pair and avoid to have to buffer each collector with opamp. I would like to know if you have some idea. Cheers However great explanation
@w2aew
@w2aew 8 жыл бұрын
As you've surmised, if you make a change in one of the slopes, you have to make a complimentary change in the other in order to keep the frequency constant. The arrangement you described (diff pair, with the two outputs mirrored to create the charging and discharging currents) will do the complementary rate changes nicely. Changing the tail current (along with a switched selection of timing caps) will give you the frequency control. The diff pair input voltage could be called a "symmetry" control. Add some emitter degeneration in the diff pair to give yourself a more linear symmetry adjustment. Just use some current mirrors on the tails and you won't have any loading issues.
@simonr6982
@simonr6982 8 жыл бұрын
oh awesome I have to try this thanks a lot for taking time to validate that !!
@shushuwu-v9u
@shushuwu-v9u 2 күн бұрын
Thank you for teaching. However, I also have a question, if I have a square wave, and use the square wave to control the switching of the current source, I can theoretically achieve a sawtooth wave with good linearity, but through the simulation, it is obvious that the output waveform is not so linear. I would like to ask you how you understand this question. How can we solve this problem?
@444guns
@444guns 4 жыл бұрын
Awesome, thank you very much for this. I was actually searching for such a tutorial, while building myself a signal generator :)
@jp040759
@jp040759 11 жыл бұрын
Cool. I was trying to control sink and source current to a capacitor for something and I could not come up with a way to switch them. Clever use of a bridge. Now I can't remember why I was trying to make this circuit. Great vids. THANX
@christopherwood8778
@christopherwood8778 7 жыл бұрын
Awesome explanation. Thanks for making this video. Subbed immediately after watching.
@valakatz3967
@valakatz3967 6 жыл бұрын
Thanks again! Great video tutorial, I love the effort you put in your videos. Keep the great work you do.
@darlingtonpear940
@darlingtonpear940 11 жыл бұрын
I think I found the way to alter the slope while maintaining overall frequency. Use a dual-ganged pot, and wire them in opposite directions. Rise and fall slopes are then inversely proportional, changed with a single adjustment. The frequency should remain the same, which is great for audio applications.
@duality4y
@duality4y 4 жыл бұрын
i love this its so clear what is going on, i might even reuse these building blocks if i ever wanted to make something else myself!
@add1c7i0n
@add1c7i0n 11 жыл бұрын
Such a badass circuit. Thanks for sharing. I need to design something like this for a class, but only with discrete parts so no op-amps. CMOS here I come!
@docfoot316
@docfoot316 5 жыл бұрын
Enjoyed and learnt all in one ,of to make up this circuit .Many thanks for sharing ur knowledge.
@tunicana
@tunicana 11 жыл бұрын
Thx Alan, believe me you have a gift of god how to explain electronics...very instructive video.i like it
@Roy_Tellason
@Roy_Tellason 5 жыл бұрын
Reminds me of a circuit... With a dual op amp, you configure one of them as an integrator (cap from output to inverting input, series resistor also to that input), and the other as a schmitt trigger (two resistors, one at the non-inverting input to output, one from that input to the output of the integrator. This simple circuit will generate a triangle wave at the output of the integrator and a square wave at the output of the scmitt trigger with only a dual op amp and a whopping _four_ passive components. Want to vary the duty cycle? Then you use two resistors (or a pot) with diodes in opposite directions for the feedback resistor in the schmitt trigger portion of the circuit, and you'll get a variable duty-cycle sawtooth and square wave. Total of six passive components and a dual op amp...
@w2aew
@w2aew 5 жыл бұрын
Definitely familiar with that circuit too. It is a "staple" in most op amp circuits books and application notes. For this video, I thought that the circuit presented offered a lot of good opportunity to discuss several different interesting circuit techniques (current sources, diodes as switches, etc.).
@T-Tronix
@T-Tronix 11 жыл бұрын
kudos for another insightful and amazing video. it be nice to expand this in to a handy function generator. your efforts are greatly appreciated.
@ronaldlijs
@ronaldlijs 11 жыл бұрын
VERY enjoyable and instructive, great work Alan as always.... please keep them up!!!
@Noscrubjections
@Noscrubjections 11 жыл бұрын
very nice video i appreciate this gift you have given all of us here. kudos!
@uzairmughal4976
@uzairmughal4976 6 жыл бұрын
This is how I imagined an engineer to be. Hats off...!
@shiweiluan
@shiweiluan 7 жыл бұрын
Hi Pro, I built a current source with NPN BJT using your circuit at 5:08 as a reference. A constant voltage is applied to Base and 110 Ohm resistor at emitter. The loads are several LEDs in serial, the cathode of the last LED is connected to Collector of BJT, the anode of first LED is connected to +24V, But the problem is: if the load are 2 LEDs in serial, the current reading is 30mA, if the load are 4 LEDs in serial, the current reading is 32mA. In these 2 cases, the voltage applied to Base is constant. Why the current readings are so different, please? Thank you.
@w2aew
@w2aew 7 жыл бұрын
Because the transistor isn't a perfect current source - it can be affected by collector-emitter voltage and by temperature. In your case, the transistor's junction temperature rises when fewer LEDs are used (more Vce), that is probably the dominant factor.
@sohaibahsan5168
@sohaibahsan5168 Жыл бұрын
Excellent 👍, at bridge switching point can we link 555 output square wave?
@321reh
@321reh 11 жыл бұрын
Your Bench Rocks!!! I'm a BIG FAN of Tek Scopes...Thanks Once Again!!!
@HeartOfGermany
@HeartOfGermany 11 жыл бұрын
You did a triangle. A sawtoth is a special form of triangle: Slow rise but immediately switch off. And! Now do it with regular NPN and PNP transistors. :D I did it, but it took quite a while. :D
@tamarkan
@tamarkan 9 жыл бұрын
Classically beautiful...as always...well done!
5 Ways To Generate A Sine Wave (Analog)
13:16
Sine Lab
Рет қаралды 113 М.
Une nouvelle voiture pour Noël 🥹
00:28
Nicocapone
Рет қаралды 9 МЛН
Леон киллер и Оля Полякова 😹
00:42
Канал Смеха
Рет қаралды 4,7 МЛН
#1878 Current Source using TL431
7:17
IMSAI Guy
Рет қаралды 11 М.
The most useful tool ever for electronics repairs - (PWJ212)
13:09
Play with Junk
Рет қаралды 276 М.
How to solve comparator noise problems with hysteresis
11:25
Texas Instruments
Рет қаралды 11 М.
How Colpitts Oscillators Work - DC To Daylight
14:14
element14 presents
Рет қаралды 53 М.
Scullcom Hobby Electronics #20 - Building a Constant Current Source Box
30:38
Scullcom Hobby Electronics
Рет қаралды 85 М.
#61: Op amp oscillators, integrators, and waveforms
22:36
Radio Physics and Electronics
Рет қаралды 38 М.
I bought 1000 meters of wire to settle a physics debate
22:49
AlphaPhoenix
Рет қаралды 3,3 МЛН
Une nouvelle voiture pour Noël 🥹
00:28
Nicocapone
Рет қаралды 9 МЛН