WAHL Wide Detailer - Zero Overlap Adjustment

In diesem Video lernen Sie in ganz einfachen Schritten wie sie ihren Detailer modifizieren können.
So einfach lässt sich der Schneidsatz des WAHL Detailers auf "zero overlap" einstellen.
The "zero overlap adjustment" is so easy! We will show in this video how to upgrade your Detailer in a few easy steps.

[@Kamunich]

bin 36 und schneide haare seit ich 13 bin, hatte bis jetzt super taper. genialer maschine, gestern aus neugier wide detailer bestellt heute angekommen. klein ist sie, schneidet sehr smooth und ist leise ganz einfach zu bedienen....danke für das video hier zero overlap ist drinne ^^

[@bozoqturkmni8137]

Hi, habe den Wahl Detailer gekauft und Zero Overlap auch eingestellt, nur schneidet die Klinge in die Haut...die rotierende (obere) Klinge steht auch nicht über...

[@Jblendtss]

Faxx😂

[@ruffy2819]

@@bozoqturkmni8137 konntest du das Problem lösen? Will sie mir vielleicht kaufen

[@wiangchaisungkhasuth9720]

It"s useful.Thank you so much.

[@jayhari1713]

I tried 0gapping them after seeing this and somehow made them worse lol, so after a few lineups with it I tried it again and now it's hitting lovely 👌

[@tatraveltour4046]

Perfect , short and simple with no stress

[@lyesmerdontlike7901]

kzbin.info/door/2e2RJBDfO8MK93ATH2V-EQvideos

[@Anonymous-nc7rk]

I have noise problem to my wahl series .. that started when i opened the clipper and take off the wire .. perhaps the power cord should not be completely tight??

[@IOG2K]

Anyone know how to do it for the cordless 5 star version? Mine has a different interior design....

[@mohdhafeez4915]

Very satisfaction tutorial video!

[@augustocabrera3742]

Nice tutorial

[@younesalexander6775]

best trimmer i have it iam from morocco

[@Drifter212]

Any videos for the spring and pastic.

[@markuma144]

Merci beaucoup

[@darkknight17]

When I do the zero overlap and I am shaving, my teeth angle become crooked. They are not straight. Does this mean I need to tighten the screws more?

[@abidrahman8495]

Loosen it again and try to straighten it then when tightening the screws do it gently so that the blade remains in the same straight position

[@fanoshadji7881]

I did it but after a few haircuts it doesn't cut at all.how can i fix it??

[@nahuelmedina2112]

Me sirvio un monton! Buen video

[@charlesalbertespinosamunoz9156]

Hola ... Compré una igual ... Ajusto las cuchillas a ras pero pelliscan o con tan ... Se colocan a ras o no?

[@masmahmood]

Hi, I have purchased Wahl Detailer Li do you sell the tool for this in the UK?

[@danieldisanti7769]

Vamoaber capas le salgo a una, despues te cuento gringo .Gracias por el video cortito y al pie .

[@isaiahbutler1938]

Do you have a vid to zero gap the razor edger?

[@730gabo4]

What size is the screwdriver???

[@Kekeboy100]

Can i zero overlap my wahl magic clip ?

[@charlesalbertespinosamunoz9156]

Coloque las cuchillas como muestra el vídeo quedan a ras pero cortan pelliscan.... A parte ví un vídeo donde recomiendan lijar las cuchillas con la máquina prendida que me recomiendan lijar las cuchillas o no colocarlas a ras

[@karimhmimi1244]

how to recognize an original wahl detailer trimmer?

[@Messii.The.GOAT.]

i didn't inderstand why he did that , can any one tell me plz ? and what's the length before and after i read that the default length of cutting it is 0.04 MM

[@helloboyz6959]

What size screwdrive

[@giorgosloizouxXGreenBarberXx]

very helpful video.thanks a lot Wahl Gmbh

[@plapoytasplapi1013]

Which one gives a better head shave (bald) the Wahl Wide Detailer OR the Wahl Legend?

[@centeguahan3760]

_Andis_ question has yet to be answered 😏

[@amanx_barberjr92]

What name guard wahl zero overlap setting? How much?

[@karrarreda6620]

Thank

[@WAHLClippersEurope]

welcome! :-)

[@leonflaithiuil6596]

I did this, and my face was hurting a bit afterwards. I made sure I did it on a flat surface, even did a 20° tilt to make sure it’s not fully 0, any help?

[@paultijgers]

On soft skin the skin can rimple. It's not recommended in the neck. The surface on the head is mostly flat and tight. Thats why for barbers its very chill to have this zero overlap

[@leonflaithiuil6596]

@@paultijgers yeah it hurt the most on the neck, the face was fine, I’ll not use it on the neck from now on

[@Allegro_Giusto]

⁠@@paultijgerso it is ok to use for part of the head to start a fade?

[@elenasakis]

Please help!!! My detailer works well without screwing the blade on.When I screw it on,the motor slows down to the point where it almost stops! I have adjusted the blades well like demonstrated on this video but still it when I turn it on It seems like it doesn't have enough power.Can somebody please help me before I decide to return it back?

[@WAHLClippersEurope]

Hello. The blade might be rusty or not cleaned properly. The motor needs way more power to run a dirty and especially rusty blade. Please oil it properly, clean it and try it again.

[@lyesmerdontlike7901]

kzbin.info/door/2e2RJBDfO8MK93ATH2V-EQvideos

[@raulrios1508]

my blade doesnt look the same. I can't zero gap them. The only reason I'm trying this is because my detailer cuts so dull

[@WAHLClippersEurope]

How does your blade look like? Do you have the regular blade? (Not the T-Blade) Maybe this video could be helpful: kzbin.info/www/bejne/jYvQZnt5mp6Uj5I

[@raulrios1508]

Wahl GmbH thank you!!

[@tokenrow669]

How do clean it when mine looks dark and almost rusty?

[@alextorres1873]

tokenrow669 buy a new blade

[@jayhari1713]

U should oil them up every so often bro

[@DJYAD19]

@@jayhari1713 Were to get new oil if its run out?

[@jayhari1713]

@@DJYAD19 u can most likely get new little bottles of oil at any store that sells those kinds of barber tools. Or I'm sure Amazon probably sells em

[@barberkingbybekir2720]

Teşekkürler başbakanım

[@bozoqturkmni8137]

Kardeş, bende enseyi alırsam eti kesiyor, sende durum nasıl?

[@umairarif2221]

can I use this machine on direct current?

[@WAHLClippersEurope]

No we are sorry. AC only.

[@cristian-bull]

but why lol

[@dachang1369]

I just ordered one few days ago. What is the reason we need to adjust it? Is it for cutting hair shorter or longer?

[@abidrahman8495]

It makes it cut hair even shorter. So when u are doing a shape up or line up it's a lot sharper

[@paveljakl]

@@abidrahman8495 does it cut the skin?

[@sheilawalker1230]

@@paveljakl yes

[@k.truell2999]

I cannot get mine right. Help!!!!! The bottom blade should be extended past the top one?

[@karlisyourpapi8479]

it should be levelled with the fixed blade but not going over it.

[@k.truell2999]

KarlIsYourPapi Thank you. Is that the same principle for regular clippers?

[@mohsenuss91]

I have WAHL 300 that is so sharp! it cuts & hurts, how to fix that please?

[@jayhari1713]

The bottom blade that's closest to the guts of the machine can't be past the top blade. U can dial it back the same probably

[@anthonyjackson4904]

What does zero overlap mean?

[@Online-zw5sq]

It hurts after you done

[@hasnathchowdhury8054]

My wahl detailer hurts and cuts the skin producing red lines. How can I fix this?

[@jbli19]

Mohammed Chowdhury move the blade a bit further in, but no too much. About 0.2mm. So it doesn't make contact with the skin.

[@bozoqturkmni8137]

@Mohammed Same here. Did you fix this problem?

[@onpoint357]

Dont use too much pressure when using it. If your heavy handed it's not wise to zero gap your trimmer. Always leave a slight gap. Use your fingernail at top of blades to feel slight gap.

[@shjesus]

Same i sold this pos

[@shjesus]

@@jbli19 it shouldnt do it out the box if we didnt even zero gap them why would we need to fix there problem🤷‍♂️🤦🏻‍♂️

[@tanayshamavuela3660]

the blades are so sharp, that it bites my customers when I set it this way.

[@AG-ql1sy]

Same. I couldn’t even touch it against my neck when zero gapped

[@tonypeters3320]

@@TONY-dq1pk but what about when they aren't hitting anymore and you need to adjust them again? Edit: Aren't hitting

[@srahman3398]

zero gap shouldnt bite generally speaking.

[@charlesalbertespinosamunoz9156]

@@REPINSTR8BAMA ví un vídeo donde recomiendan colocarlas al mismo nivel y prendida la máquina pasarla por una lija delgada... Que recomiendas?

[@ChaoticMuchX]

@@charlesalbertespinosamunoz9156 NOOOOOOOOO!!!!!! ABSOLUTELY not!!!!! if you do that way, you will dull the blades!!! whoever did that way, is the most stupid person ever!!! if it is biting, the problem isn't with the sharpness of the blade. the problem is that the cutting blade is extending over the top blade. that is the stupidest thing vlive ever heard!!! please, do NOT do that!!!

[@jaykob2482]

Can somebody please tell me how to NOT zero-gap the Wahl T-Wide blades? I would like to know how to put a normal, slight gap on these blades. I have very sensitive skin, so a normal, slightly separated T-Wide (or any) blade is perfect. If I'm not mistaken, I remember a yt vid where a guy takes a trimmer blade set to a mirror and pushes it straight down on the mirror and continues to push with light pressure while placing it at an angle causing a slight gap in the blades. It might seem like I have no trouble recalling the vid, but it's so vague that I would need to watch it again to do it correctly. And that's if the memory I'm recalling isn't confabulation, lol.

[@laurentiumatei111]

My Wahl trimmer came with a special tool to adjust the blades. If you don t have that tool, you’ll have to loose a little those two yellow screws and lower the moving blade with 0.2 mm below the fixed one using your eyes amd fingers.. so, MANUALLY. Its not really hard, i’ve did it in 5 min;). Good luck!

[@jaykob2482]

@@laurentiumatei111 Thanks for the help, I appreciate it, bro!

[@spiraldynamics6008]

How to cut customer skin.... nice video

[@cesarforte617]

Your a clown

[@laurentiumatei111]

Actually he is not and you’re a idiot! If the moving blade is not below the fixed one with like 0,2mm, it will scratch-cut-hurt your skin!... especially on your neck where the skin is more softly. Did it both ways 10 min ago with mine and .... you’re an IDIOT!:))

[@libertedexpression157]

Il faut faire de la mécanique presque pour utiliser sa tondeuse

[@emanuscriptgraphics]

They have a zero gap tool specifically for the detailer now. No sense in risking cutting of your clients.

[@emanuscriptgraphics]

I bought mine on Amazon two years ago, but I can't find it on Amazon now. This video shows you that it only comes with the black detailer, but that makes zero sense to me. kzbin.info/www/bejne/r4C9ZoiPppqrh6c

[@TheGhostManN]

They "used" to come with a zero gap tool but since Wahl widen the blade, they don't come with them anymore

[@giuseppeprestifilippo8141]

You won't cut anyone if u try it on urself first, ofcourse that is entirely up to you.

[@user-uo3ul3nx8r]

سعر كام

[@linekersantos2750]

this adjustment of the kkk blades was all wrong. cut a customer right

[@boogiemusicusa]

"kkk"blades? LOL.

[@umairarif2221]

these are corded trimmer?

[@WAHLClippersEurope]

obviously :-)

[@veemontana718]

but i thought they come zero overlap??

[@Harrydavieshair]

Not all the time mate

[@Haryana-Express]

What's the price

[@jimbonifede7037]

170 dollars

[@jaydeetech9731]

I didnt know this, why doesnt wahl tells this in the manual?

[@cristian-bull]

because it would be like recognising their products are or will go out of calibration over time.

[@bricklay8160]

Is crooked

[@juanantoniogutierrez7423]

You over did it

[@northweezie1]

My blade doesn't come off when I undo the screws?

[@WAHLClippersEurope]

have you tried to pull harder?

[@northweezie1]

Wahl GmbH I have but it just seems as if the metal is digging into my fingers. I have the 8081-917 model if that makes any difference? I will try again but I doubt it will come off.

[@WAHLClippersEurope]

Well, possible reasons for your issue are: Rust, Dirt or missing blade care. How often have you oiled it? My sugestion, put your screws back on, oil it propperly, let the blade run for a while, oil it again, unscrew the blade and try to pull as hard as possible. You should also consider to get yourself a new bladeset. To avoid this kind of problems, oil the blade after each cut. I hope this will help.

[@northweezie1]

Wahl GmbH doesn't come off. I've opened it up completely, won't come off. Is there an email address I can send pictures to, to explain better?

[@WAHLClippersEurope]

Sure! Send your E-Mail to online-marketing[@]wahlgmbh.com and I will take care of it.

[@sherjeelchaudhry2612]

474th like and 41st comment so early lol:-)

[@khairulazlee3745]

Not hurt skins?

[@WAHLClippersEurope]

If done right, it won't hurt the skin.

[@umairarif2221]

ok

[@blackhawks1870]

Doing this will cut the hair shorter, sorry not a professional just have the same product

[@porettamarc5274]

👴➡️👩‍🦲 👍

[@brahimradi3526]

Li itabelesmon

[@brucepayneii7705]

🤝🏾🫡

[@wyzecrispy2884]

This video is a joke right??

[@WAHLClippersEurope]

even though we are funny fellows - IT'S NOT!

[@pgharaghani28]

Because you can clearly see in the still image after adjusting that the smaller moving blade is completely and outrageously crooked. And zero gapping blades are never actually 0 overlap, that would cut the skin on any human being. The smaller, lower blade should be just a hair shorter than the top stationary blade.

[@armandoalin3643]

Vrau sieu ocomaand

[@Drifter212]

Any videos for the spring and pastic.