Fixing A Maytag/Whirlpool Washer That Is Making A Grinding Noise!

[@susanelliott6015]

Exact noise my washer is making. Its not even a yr old! Thanks for the help! They definitely dont make them like they used to!

[@DuctTapeMechanic]

Thanks for watching. Glad to help!

[@AnonDrewT]

@@DuctTapeMechanic I want to thank you as well. While mine is a bit fuller sounding, that’s the same noise. No other “10 sounds your washer may be making and how to fix” videos were this!

[@bryanmeier8251]

Same here for us too

[@nathanielalexander9812]

​@@DuctTapeMechanic. K..ommi

[@jellyg.8961]

And this shows what the concept of planned obsolescence is all about. A critical part, subject to pressure and lots of friction, made of very cheap plastic. They can make it all metal or a harder better quality plastic but then...it will not fail and the washer will last a long time so less people will replace them and it will mean less profits for them.

[@bicivelo]

Diy Videos like this bring a tear to my eye. 😢 No stupid music, excellent explanation, great video, no Shaky camera, good lighting, no extra talking, straight to the point. Subscribe and liked! Thank you! 😊😊😊😊😊

[@DuctTapeMechanic]

Your welcome! Appreciate the support and feedback!

[@randyweflen4067]

Thanks for the video. I just took my Maytag Centennial washer apart and brought these parts to my local appliance dealer/repairman. He said the teeth looked fine so the problem was likely the transmission and would be very costly. I put the same parts back on and made sure the nut was tight. No more grinding. ZERO COST REPAIR!! Thanks again!!

[@DuctTapeMechanic]

Awesome! Sometimes the clutch gets stuck, just cleaning/greasing it will free it up

[@nolongerhuman13]

Same washer nightmare I’m facing. Same friggin machine !!!! You’re awesome!!! Thank you

[@DuctTapeMechanic]

Glad to help!

[@dogofred]

I appreciate the knowledge. Service Man was trying to tell wife it was non repairable. It's not even a year old. He told her transmission was almost as much as the washer.... So again I say Thank U!

[@michaelelias1372]

Honestly your Repair man is right! A Transmission can be for this model is usual 400 to 475 for the Repair. He was probably trying to save you money! Look for oil and leaking underneath. If you see oil , usual a sign for a new one. Also would need a belt probably with the Repair.

[@gailwagner8115]

People like you make my sister think I'm a genius!! ROFLOL I truly appreciate this because that noise makes you want to run away!! She heard it and told me it was too noisy I couldn't fix it it was too broken.. lol

[@DuctTapeMechanic]

Awesome! Surprisingly, this is not the first time I have gotten a comment of this nature. Lol

[@amindyourbiz]

Thank you so much for this video. I had the same noise and I went to go look at everything and the nut had backed off the bolt on the pulley and allowed it to drop and disengaged the clutch. so I didn’t even have to replace anything. I’m 3 loads in and everything seems fine! 🎉 this saved me so much bc I’m a broke single mom of four kids and I can’t afford a new washer right now.

[@DuctTapeMechanic]

That's wonderful! Glad you found the video helpful!

[@smy]

Fixed my washing machine today because of this video. The kit he refers to / links to from Amazon is actually pretty bad quality. I spent an hour or so messing with the splutch. Once it was in place, the gear would not shift. I eventually went back to the original parts as they weren't broken or worn down. I added a bit of the grease that he mentioned and reinstalled. Gear shifting worked as expected. Once everything was in place, I put the machine back, hooked it up, and ran a Normal Wash cycle. Worked perfectly. Thank you for this video!

[@mark.23]

After 2 days of searching for a repair video i found this video, i have a kenmore that makes that exact sound. Its a relief to know i wont have to call anyone to repair it

[@brianlopez8970]

Just fixed mine with your guidance. Thank you brother. Saved 500 bucks in new one. Only cost 15 to fix

[@DuctTapeMechanic]

Awesome! Glad to help!

[@arwoodedwards65]

Thanks for this video, this was a big help to me. Note: I have a Whirlpool washer and you don't have to take to shift solenoid off to replace the clutch assembly.

[@DuctTapeMechanic]

Glad it helped

[@jeremywilliams1598]

Very informative and to the point on disassembly and reassembly. Haven’t found my problem yet, but this helped me eliminate some things.

[@joshpremo3713]

My washer was making this exact noise and wouldn't move or spin. So I ordered the part kit you linked. I took off the old clutch gears and none of them were warn or ground down. I figured I'd try replacing them anyway and somehow it worked. Thanks so much!

[@DuctTapeMechanic]

Right on! Good work

[@theronsimon187]

Thanks for the video. I haven't diagnosed the noise yet, but it sounds exactly like the one in the video. I will hopefully be working on it within the next few days. Thanks for your time.

[@DuctTapeMechanic]

Your welcome! Best of luck with the repair

[@robertarcher2616]

Thanks man, I've just finished the repair . I my Whirlpool works quietly once again. You saved me some coin.

[@DuctTapeMechanic]

Awesome! Glad to help!

[@bogartbrown]

Thank you for the detailed instructions. It was pretty easy to do and fixed the inexplicably loud noise from my 13 year old Whirlpool.

[@DuctTapeMechanic]

Your welcome! Glad your problem is resolved!

[@timjohnson1578]

Great video!!! Aircraft mechanic here and you did great explaining things! got my kit on order.

[@DuctTapeMechanic]

Thank you! Best of luck with the repair!

[@brancloudable]

Thank you so much!!! This fixed my washer. You saved me so much money!!! I was able to follow your instructions easily. I had to do it twice because somehow I failed to put the gear shifter thing on correctly. But that’s my bad! I appreciate your video- concise and informative. 100 stars.

[@DuctTapeMechanic]

Glad I could help! Great job of doing it yourself!

[@mkenyon7429]

Thank you. The first video showing the clutch/splutch actuation. My Maytag was leaking water and needed the gearcase. After reassembly it made the loud noise during the wash and the rinse cycles when the clutch was not engaged. I should have greased the splines and checked clutch travel. The "experts" videos did not show this. The parts are not expensive so I should have put in new when the gearcase.

[@DuctTapeMechanic]

Awesome! Glad to help!

[@mkenyon7429]

@@DuctTapeMechanic I used a 1.67mm thick 12mm small outside diameter stainless steel washer to shim the gear away from the clutch. got it from the local Ace Hardware. I had a 1.22mm thick washer but could still feel the teeth rub when the clutch fully disengaged. A new clutch kit may have prevented the problem with the new gearcase.

[@DuctTapeMechanic]

@mkenyon7429 That's creative! And a good tip for a pinch situation in the field!

[@freddyhenriquez4536]

Thank you, Sir. My washing machine was doing the same noise and thanks to you. I check it out and it was only loose. Problem fix thank you so much.

[@DuctTapeMechanic]

Good job. Glad to help!

[@francoisgilbert3266]

tks my friend took me less then 1 minute to fix after seeing you vid .... tks hose were already out, unscrew the protector zip zip, move the arm that was badly engage ... and works fine now

[@DuctTapeMechanic]

Very nice! Glad I could help!

[@jimmyaber5920]

I had a hair get into drum seal and that let a small amount of water to leak and that got into bearings. Binding bearings can make the trans fail to shift and that eats the clutch plastic teeth. The Centennial uses bearings that are not serviceable and the drum support/gearbox is spot welded sheetmetal. Service guys will quote the trans and clutch due to the high failure rate of the seal, especially in areas where water is hard and deposits shorten life of the seal.

[@stevenhulbert7540]

Thanks for the video. My Kenmore is only 5 yrs old and the grinding noise started. Thought it was the washplate but couldn't remove the bolt with a ratchet. Called an appliance tech who couldn't remove the bolt either so together with my impact wrench and his adapter got the washplate removed, it was fine, he was baffled. He consulted with fellow techs and concluded it is the gearcase and the cost to replace that is more than half the washer value. I don't know if it IS the gearcase or if it's the clutch.

[@DuctTapeMechanic]

Would definitely try replacing the clutch before tossing it. It's only around $25 on Amazon

[@ErnestShade-d5w]

I had the same issue. Problem resolved with replacement of the pulley,clutch assembly and the actuator. Also must recalibrate the entire cycle.

[@rogersride]

It was so loud it scared me and my dogs. It was in the laundry room with the door closed. I plan on doing this repair. I'll let you know how it goes.

[@Rorshacked]

Worked like a charm. Good stuff, definitely gonna come to your channel to fix my appliances.

[@onejuice1059]

Thank you. You just saved me $1500.00 on a washer and dryer set!

[@DuctTapeMechanic]

That's awesome! Glad I could help!

[@dabosman43]

Great video , helped me with fixing my washer . This was the exact noise it was making and I was able to buy the kit from the link....only problem I ran onto was the cup (middle peice) was way to tight had to use the old part but I believe the spring was actually the problem because all the other parts fit perfectly and the noise went away..ty again

[@DuctTapeMechanic]

Glad I was able to help!

[@oakcliffpride]

Great job on the washer repair and the video I appreciate it being very clear and straightforward!! Thank you

[@DuctTapeMechanic]

Thank you for the kind words!

[@nicolecoronado960]

I changed out the parts easily enough thanks to your informative video. Put it back together but it still makes the grinding sound. What should I check next? 😬

[@DuctTapeMechanic]

I would take off the clutch and reinstall it just to make sure it is installed correctly (also is a good idea to grease it). If that doesn't resolve it, i would replace the shifter (it is possible that it is not shifting fully plus a new one is only around $20 on Amazon). Also, check to see if the transmission shaft has forward and backward play by pulling the transmission pully back and forth. If it moves a lot, then your transmission is bad and you need a new machine. Hope this helps.

[@johnbrown5724]

id like to see ore videos like these with a tools list at the beginning. Great Video!!!

[@DuctTapeMechanic]

Thanks for the feedback. Appreciate the support.

[@NateRobertson-d1n]

Excellent video brother!! This is exactly what's going on with our washer. Appreciate all your help God bless you. Thanks for the video.

[@DuctTapeMechanic]

Your welcome! Glad to help!

[@kylecross8770]

I got lucky and found a new clutch set on sale on amazon. Thanks very much for the video!

[@DuctTapeMechanic]

Great to hear!

[@richardsanchez9435]

Awesome help and fix Duct Tape Mechanic. Very detailed video for us DIY old folks. The replacement prices anymore are putting a huge strain on the elderly, Thank God for people like you to help us out of the money pit of today lifestyles. PLEASE keep the DIY videos coming, to day you were our lifesaver. Our washer and dryer were only two years old when it needed this kit, Thanks Again!!!!!

[@DuctTapeMechanic]

I'm really glad the video helped you! It's comments like this that keep me going! Thank you!

[@shaunmartin285]

I have replaced every part under my Maytag Bravos washer. The gearbox is just fine still. I have noticed that the parts from amazon dont fit jist right but with a lil work they will work just fine

[@richardsanchez9435]

Yeah, the belt in my kit was a tight fit but it's still working two months later.@@shaunmartin285

[@shaunaquin4242]

Hey just a filming tip. When you use the selfie camera the picture is backwards, like all the letters in a word. With your selfie camera on you should be able to go into its settings and change them to flip the picture on playback so it isn't backwards. Thanks for the video. It helps a lot!

[@DuctTapeMechanic]

That's a wonderful suggestion. Will have to remember that. Thank you.

[@HighSierra804]

Great video but my issue was the drive pulley on the motor, so I would order that also with the clutch kit just in case you need that also.

[@DuctTapeMechanic]

Good tip! Those motor pulleys can get loose/stripped as well!

[@mikealexander4166]

Great job, short and sweet and to the point for us attention deficit challenged. Just order my parts for this very job.

[@DuctTapeMechanic]

Thank you! Best of luck in your repair

[@Jphillmar]

Thanks. Gave me the answer I was looking for and saved me a lot of money. Appreciate you doing this post.

[@DuctTapeMechanic]

Glad to help! Good luck on your repair!

[@Jphillmar]

It is done and working great!

[@DuctTapeMechanic]

@@Jphillmar awesome!

[@mrslucas08]

Yup! This what my machine sounds like! Thank you for your video!

[@DuctTapeMechanic]

You're welcome! Best of luck with the repair!

[@BrennanJspencer]

MY MAN!!! 1 hr later and an 18 dollar part , no issues after I was told by "pros" its trash get a new one

[@DuctTapeMechanic]

Awesome! Great work!

[@kvhaynes]

You have saved me so much stress! My clutch was sticking, so I didn't need to replace it. I just cleaned it and greased it. Thanks!

[@DuctTapeMechanic]

Awesome job!

[@jasonjohnson4170]

Same noise ours is making. Going to follow your steps and hopefully we will be back in business soon. Thank you

[@DuctTapeMechanic]

Best of luck!

[@maxr4440]

Easy to follow, fixed my washer. Great video.

[@DuctTapeMechanic]

Awesome! Thanks for the kind words!

[@ronhobyak9902]

When my drum spins it sounds like ball bearing skipping or grinding. Not that plastic teeth clicking sound you made. Would this be in the transmission and do you know if it is openable to repair / grease or replace ball bearings. My agitator post wobbles a tiny bit and shakes the cabinet some. I replaced the shift switch because it was not spinning. It spins now and does a full cycle but it shakes and I am worried that it needs more fixing. Saw this vid after fix and wish I had greased the gear mechanism. Also forgot to place belt cover. Tipping it over again ... 😂

[@Dangbo3030]

Also make sure that the washer is level or the washer will not operate correctly. A torpedo level and pliers to adjust the legs of the washer.

[@jp7489]

Thanks for the vid👍my Maytag bravo MCT washer is making that same noise I'm gonna give it a shot replacing it gonna cost me $35 I hope that takes care of that issue...

[@DuctTapeMechanic]

Best of luck!

[@tellmesomething2go]

Tape! we`re watching this like we`re watching heart surgery. so if we miss something, we feel like we might die. put the camera where we can see every speck of action, we don`t want to miss anything. bravo!

[@DuctTapeMechanic]

Best of luck with your repair!

[@davidclute6110]

Short and to the point. My 12 year old Whirlpool started making this noise. Looks like I’ll take it apart and hope it’s the same issue.

[@DuctTapeMechanic]

Best of luck!

[@sherryhogan4412]

So happy I came across this video. Exactly how mine sounds. Will be trying to fix mine myself due to easy to follow instructions. Thank you so much!!

[@DuctTapeMechanic]

Best of luck! You can do it!!

[@copernicushell]

Your video saved my machine! Thank you!

[@DuctTapeMechanic]

Awesome! That's great to hear!

[@swilli932]

Thank you so much for this. I understood everything perfectly to get this fixed.

[@DuctTapeMechanic]

Thats awesome! Glad to help

[@luczasak1049]

❤❤❤ thank you a million times over this actually truly was simple and it worked thank you thank you thank you!!!!!

[@DuctTapeMechanic]

Your welcome! I appreciate the kind words!

[@huevos305]

What did you use to clean the teeth of the transmission? 4:56

[@taylureonevalution3720]

Not the exact noise mine is making but youre already more helpful than the actual companies youtube channel. 🙄

[@DuctTapeMechanic]

Glad to help!

[@angiecarlin5091]

My same machine is making the same noise. A great video and easy to follow, however, my clutch assembly looks completely fine with no wear. Could this noise be the cause of a bad transmission or shifter actuator?

[@DuctTapeMechanic]

A loud metal grinding noise definitely could be a bad transmission. Most of the time this type of noise it is a bad clutch (sometimes the arm gets stuck halfway between shifting from agitate to spin). I think you could get the clutch and the shifter both for about $50 total on Amazon. I would do that first because a transmission is too expensive to replace.

[@angiecarlin5091]

Just a quick update, it turned out to be the drive motor pully, a $15 part... and it was making that same exact noise.

[@DuctTapeMechanic]

@@angiecarlin5091 yes the pully that js bolted to the transmission shaft can cause this noise. I usually replace it when I replace the clutch. Good work on repairing your washer!

[@itsmelili326]

So drive motor pulley causes this same noise? I had the part in this video replaced today by a repair man who's repaired this thing 3x. I thought for sure he'd know but nope. After all his work, still making the same noise 🤷‍♀️

[@angiecarlin5091]

That was what caused my washer to have this noise. It was the drive motor pully, not the transmission pully. It's simply bolted to the bottom of the drive motor. It was quick easy fix. It only took about 10 minutes to replace it and only cost $15 for the part.

[@johnroger8563]

You know your stuff but it helps so much that you explain and show the detail. thank you

[@DuctTapeMechanic]

Glad it was helpful!

[@notmee2388]

Do you have a video about replacing that top plastic gear that the clutch assembly hooks up to (the gear with the spring around it?) Mine looks very worn, and I think that may be why the clutch lever jams when raising the parts to meet up. I hope that made sense. I’m kind of guessing with part names

[@seanprados4829]

Molly is a great lube but don't get it on the belt or in the channel of the pulley where the belt goes. Moly is hard to remove off any surface

[@DuctTapeMechanic]

Good advice!

[@alexanderson2925]

Love the video! I have the same problem and I have ordered the assembly, but I can't get the nut off to begin with. Even with an impact wrench. Any tips?

[@DuctTapeMechanic]

Thank you. I would try wd 40 then hold the transmission pully with one hand and use impact on nut

[@juliusritz4444]

Thanks for video. Very good step by step. Thanks again!

[@DuctTapeMechanic]

Glad you found the video helpful!

[@shaunaquin4242]

Thanks again for sharing your knowledge! You explained it very well. It was easy to follow.

[@DuctTapeMechanic]

Glad to help!

[@briana1826]

We had this problem on the same exact machine you worked on and we replaced the part you did but now it’s not switching to the next cycle making a ticking noise did we do something wrong? We didn’t have the grease, Is the grease needed and is what is causing this problem?

[@donvoll2580]

Good day from Ontario Boy interesting video. Thanks

[@DuctTapeMechanic]

Glad you enjoyed it

[@traveller5551]

Great video! Really helps in the diagnosing and repairs. Thanks.

[@DuctTapeMechanic]

Thank you!

[@ruthking7602]

Actuator was changed, at times high speed spin/agitate no work Ran both tests (auto,mea😮an) will clear and work 1or2times after recal. Last run 1st ag cycle screach stop. But would drain and spin dry (both speeds) w/ slight screach 1or 2 time. Code 7/1-7/5. Basket looks good.. very slight out of round?

[@judygregoire5473]

Thank you so much for showing me what my problem is my GE is not even a year old it's only 9 months old and I have the problem of the teeth of the clutch grinding her yeah grinding I guess that's what you call it and you saw my problem but I don't know where to go to get the parts

[@DuctTapeMechanic]

No problem! I would search the model number on Google or the GE website. Should be able find the clutch and all its parts there.

[@jbgray1960]

Make sure you tell people. Put the center ring the right way. Other than that PERFECT !!!!!

[@joesczepanik5049]

Great video and information. I have the same issue with a grinding sound mostly during the wash cycle. I was wondering, if i manually spin the agitator and dont hear the grinding, does that mean it is not the clutch assembly or can it still be the clutch assembly even though there is no grinding when I spin the agitator? Thanks for you help??

[@DuctTapeMechanic]

Manually spinning the agitator to test the clutch is going to touch because most of the grinding and slipping occurs at high speeds

[@gavikpt1]

Did you find out what the problem was with your washer? Mine is having the same issues. Many thanks in advance 🙏🏻🙏🏻

[@fernandowoodysanchez9062]

Thinking about replacing the plastic pulley wheel on the transmission motor, let me what you think? It does have alot of wear

[@marcomaldonado4364]

Thanks for sharing, very informative video.👍

[@DuctTapeMechanic]

You are welcome!

[@CarmenOates]

Thanks for this video. Seems like our exact problem. Question: the new clutch fits so tightly on the transmission shaft that it will not slide from forward to reverse at all. Any ideas?

[@DuctTapeMechanic]

Perhaps try redoing and make sure it is properly clicked into place

[@jaimerivera8282]

How do you remove the drive pulley ?thanks in advance 🙏

[@Milfox]

Hello friend. I found your video very helpful. I have the same problem but I think it is not the pulley but the gear you lubricate at 5:07. That piece is a whole part or is it just that white part? Do I have to disassemble the whole transmission?

[@Milfox]

The sound made by the washing machine I use, unlike the one you show in the video, does not follow a pattern but is continuous. It can generate its wash cycle without any problem but when switching to spin it is as if the teeth are not anchoring to each other. Could it be the spring that is worn and does not extend the pulley completely?

[@gailwagner8115]

So just took this apart and the gears actually look good but there was no crease at all! Could that be the problem? Or do you think it's the pulling motor? I could order it but I put grease on and I guess we'll see if it picks the problem

[@gsnehme3431]

Hello! I was able to replace the parts as directed but it’s still make a similar noise

[@DuctTapeMechanic]

Grease the clutch teeth and replace shifter. Also, check to see if there is back and forth play in the transmission shaft. If there js, you have a bad transmission causing your clutch to missalign (rare but can happen). Good luck with the repair.

[@wyseave]

Thanks! Worked Marvelously

[@DuctTapeMechanic]

You're welcome!

[@kristinwright1425]

i’m looking to buy a new washer and dryer. I want to know your opinion on what is a good brand to buy that last a long time I’m not looking for bells and whistles I want something that will wash my clothes and get them clean and do the job.

[@DuctTapeMechanic]

If you are going to buy new I would just buy a whirlpool washer and dryer. The basic ones. You want to make sure the washer has a agitator and the dryer is the one with the lint trap on the top. Also, do not overload the washer otherwise you will strip out the tub in a year and it will shake violently. That's is how I would approach buying a new set. I perfer older used whirlpool/kenmore washers and dryers.

[@ShawnTylerF]

Does the agitator on this machine spin separately from the drum or is it fixed? Mine doesn't move at all but the drum spins around it. No weird noises though

[@glowstick989]

Thank you bro! This fixed my problem!

[@DuctTapeMechanic]

Awesome! Glad to help!

[@mark.23]

I have a 4.7 cu. ft. Top Load Washer w/ Built-In Water Faucet & Agitator. It also makes the same noise, how do i get to the part since its a different model? Thank you in advance, can you point me in the right direction.

[@chadisaacs4988]

Exact noise my Kenmore 500 was making. I replaced the clutch assemble and actuator, and everything works great except at the last few seconds of the spin cycle it makes the grinding noise again...very frustrating. Any suggestions?

[@DuctTapeMechanic]

Take off the clutch and see if there is play (back and forth) in the threaded shaft of the transmission (the part that the pully bolts to). If there is play your transmission is shot. If there is not my only suggestion is to grease the teeth of the clutch and put everything back together.

[@chadisaacs4988]

@@DuctTapeMechanic Confirmed, transmission is shot, there is a lot of play. Thank you for the assistance.

[@DuctTapeMechanic]

@@chadisaacs4988 that's a bummer. If you can get your hands on a working used kenmore 90 or 80 series machine you probably won't regret it

[@angelicac8383]

@DuctTape Mechanic Came here precisely because my Kenmore Series 90 isn’t spinning. First repair its required since I got it circa 1998. Thank you so much for sharing!

[@davidacevedo4037]

Does this style washer have a motor coupler? Is that possibly where my grinding sound is coming from or most likely this?

[@DuctTapeMechanic]

No this style does not have a motor coupler most likely it is the clutch making the noise

[@davidacevedo4037]

@@DuctTapeMechanic hmm the clutch looks solid. Motor pulley looks stripped though I think that might be it, going to try to replace that part and see if it helps the issue

[@davidacevedo4037]

@ducttapemechanic the motor pulley replacement fixed the issue! Thanks for this video! I don’t follow anyone but I’ll keep following you

[@DuctTapeMechanic]

@@davidacevedo4037 awesome job man! I appreciate the kind words!

[@joeygarner9620]

Whats the part # for the nut that goes on the bottom of the shaft pulley mine fell off cant find it

[@DuctTapeMechanic]

Not sure if you can buy just the nut. Most clutch kits from Amazon come with a replacement nut

[@aarongrainger2545]

I'm working on a older kenmore direct drive washer and the model number plate is missing is the model number anywhere else on the machine, gotta get a lid switch, the style that's in the open area with 2 screws not under the console w/o screws

[@norfolknwhey4787]

Have you replaced the agitator hub before on this model?

[@DuctTapeMechanic]

Yes I have replaced the hub on these

[@lisabrewer9136]

Hello, thanks for the video. We have a maytag model MVWC 416FW1 Type 58820 series 074931525. When our washer is spinning, it sounds like a jet engine. It is really loud. We hear a little grinding but not what was in your video. Do you think replacing with a new clutch kit will help and solve our problem and the part number you posted for amazon will be compatible with our model? Dp you think it could be the bearings? Our washer looks identical to the one in the video. Thanks!!

[@DuctTapeMechanic]

If it sounds like a jet, then the bearings in your transmission are bad. This requires the transmission to be replaced. I do have a video on that as well. However, it is a costly repair (around $200 if you do it yourself)

[@meggerz24]

I don't know if you will see this, but I have a question - I have this exact same washing machine and it's making this exact same sound so I plan on attempting the repair you demonstrated here, however there is still some water in the washing machine that I can hear when i move the drum around with my hand. I stopped the spin cycle when I started hearing that noise. Is there another way to drain it or when I tip it over is it going to spill everywhere?

[@DuctTapeMechanic]

I would personally set the washer to drain and spin mode once before doing the repair (I know it will be loud but it sure beats making a watery mess!). That is probably the easiest way. Best of luck with the repair.

[@meggerz24]

@@DuctTapeMechanic awesome, thank you! I wasn't sure if I should let it run with it making that noise, out of fear that running it would damage other parts... but if I just have to endure that horrible noise and it's not breaking anything else, listening to that definitely beats a watery mess!!

[@MikaHayes]

Do you have to use the grease

[@gokalsingh9513]

Very helpful video. Thanks .

[@asiam9033]

Thanks for the video. It worked like a charm.

[@DuctTapeMechanic]

Awesome! Glad to help

[@mostlikelywedoitservices6926]

Is the transmission leaking? If not, then what. Is all the black spray-out pattern?

[@lindadunn1431]

Well I'm going to give this my best hope I can do it as good as you did thanks

[@DuctTapeMechanic]

No harm in trying. Best of luck!

[@MattSikon]

What spray did you use to clean every thing off there?

[@missTiffuhnee]

Does it matter what kind of grease?

[@DuctTapeMechanic]

Probably not. It's just plastic gears

[@missTiffuhnee]

Thank you so much ! So I can get that from any auto stores??

[@DuctTapeMechanic]

@@missTiffuhnee yes or the local Harbor Freight store for like $6

[@missTiffuhnee]

Omg! Thank you soooo much!! Super helpful! Thank you for responding and answering ! Super appreciative ! I just ordered my model’s clutch! I’ve been watching this video for probably 30+ times just make sure this is a the right one 😭

[@missTiffuhnee]

@@DuctTapeMechanicI forget there’s a harbor freight 😅

[@creepincat7399]

Mines making a terrible loud grinding noise randomly too. I took it apart and all the gears look fine. I took off the agitator and thwre was a hair ball stuck. I removed it and put it back together and it made grinding noise again. Doesnt seem to happen everytime

[@DuctTapeMechanic]

Most likely, the clutch assembly. Replace the belt as well (sometimes it will slip and make a load screeching noise)

[@creepincat7399]

@@DuctTapeMechanic thank you! Luckily I'm within 1 year so Maytag is sending someone to take a look. No cost supposedly. If I don't like what they say I'll do the repair myself.

[@Rainissick]

Is that the link to the clutch kit for washer wtw4955hw2 that’s my model my clutch something is wrong it not agitating

[@DuctTapeMechanic]

The clutch kit is the same for pretty much all the models

[@Rainissick]

@@DuctTapeMechanic ok Thankyou ordering now

[@Rainissick]

@@DuctTapeMechanic im replacing the clutch now also watching your video again as I do it

[@Rainissick]

I replaced the clutch I don’t know it’s still making this noise and not agitating I can send video

[@Rainissick]

I don’t know I guess I’m just send it to a mechanic 🤷

[@adampeterson6463]

So when it spins(or trying to spin) it makes this noise that s in your video. replaced the pulley clutch kit but still making the noise. I am going to try the Actuator next. Think that could be causing that horrendous noise!?

[@DuctTapeMechanic]

Either the actuator or the transmission pulley. Alot of kits on Amazon come with clutch and transmission pulley might as well change them all while you are down there.

[@adampeterson6463]

@@DuctTapeMechanic Thanks. Hopefully the replacing the actuator will fix the issue. I'll do that tonight. When I was replacing the pulley, it was so hard to twist that part into place. The tabs did not want to slide into place. I had to gently tap/twist with a hammer! It is nice and snug now! :)

[@adampeterson6463]

@@DuctTapeMechanic no luck. Got a new actuator but still making the noise.

[@tyhouston2750]

Did you have to replace any parts? Or did the cleaning and greasing help eliminate the noise?

[@DuctTapeMechanic]

In this instance, I did replace the clutch

[@AlexisCocly]

Thanks this fix worked and save me some money.

[@DuctTapeMechanic]

Glad to help!

[@michaela8802]

Mine makes the same noise in "normal" cycle while shuttering violently. However, if I switch over to the "rinse and spin" cycle it seems to work just fine...even the agitator works quietly. Then I go back to the "normal cycle" again and the loud grinding noise and shuttering is back. Do you think this is the same problem?

[@DuctTapeMechanic]

I would replace the clutch and the shifter