Рет қаралды 7,782
Today we're looking at rebuilding the diaphragm carburetor used on a lot of paramotors, the Walbro WB32. I'll run through the tear down and full rebuild including replacement of all maintenance parts i.e. gaskets, mesh/gauzes and diaphragm.
Disclaimer - I do not take any responsibility for any damage you may cause to your property should you wish to follow this guide.
Any questions just ask
The ParaFixIt series was born from the renovation project of my Hirth F36 (Solo 210) paramotor. On my journey to fix this old motor up i've decided to document a how to series which includes general & scheduled maintenance and the full rebuild of the motor itself.
Subscribe and follow our adventure in becoming paramotor pilots.
Gear I use:
Camera | amzn.to/2DcbSXu
Action Cam | amzn.to/2Fms8qB
My Wide Boy | amzn.to/2IaFw2L
The Workhorse | amzn.to/2oXFQcB
The Long Reacher | amzn.to/2Fqoaxd
Tripod | amzn.to/2Fq0B7R
The BEST Monopod | amzn.to/2SVsGKL
Microphone | amzn.to/2I91hA2
Drone | amzn.to/2p26Mbh
Steady Cam | amzn.to/2G7PyRS
Cheeky Slowmo Creator | amzn.to/2Hfo9N1
Paramotor Stuff:
Everything you need to know about paramotoring | amzn.to/2CKOaTN
#ParaFixIt #Paramotor #2StrokeRebuild