Walker-Turner 10-inch Antique Table Saw, Part 2: Disassembly and Tabletop Restoration

In this video (Part 2), I walk you through my process of disassembling an antique 1940’s Walker-Turner 10-inch table saw as well as restoration of the cast iron tabletop surface and metal extension wings. Please enjoy!
Three channels, among others, inspired me to take on this project: Woodshop Junkies, Ev3ryday Workshop, and black1985vette. Please check out their channels as well as others in the included playlists for great woodworking and restoration content.
I am an Amazon Associate, and the links below are Amazon affiliate links, which means I will earn a percentage commission, if you make a qualifying purchase on Amazon within a certain amount of time after clicking the link. Thank you in advance!!
The Delta Table Saw I would’ve bought if not for the Resto:
amzn.to/34xAX2P
The SawStop, if you can afford it: amzn.to/3uMJhq7
Movo WMX-1 2.4GHz Wireless Lavalier Microphone System:
amzn.to/3gJWMyw
Telescoping Magnet by Master Magnetics:
amzn.to/3uMziRF
Drywall Sanding Pad with Handle:
-Full Size: amzn.to/3LvJC6o
-Shorter: amzn.to/3BkOGWI
CitriStrip Gel:
32 oz: amzn.to/3rUPBKp
Disposable Paint Brushes: Multi-pack:
amzn.to/3gG6CRU
EVAPO-RUST: I’ll use this for the resto of rusty components, such as nuts, bolts, washers, etc.:
DO NOT use it on you cast iron tabletop surface:
amzn.to/3uM7GMd
Disposable Vinyl Gloves:
amzn.to/3LHPJor
Sandpaper Multi-pack: Decent reviews and a good price:
amzn.to/3GG1UhC
Spray Lubricant: You can also get the Tool Bench version in-store at Dollar Tree for $1 ea.
Tool Bench Hardware, 2 cans: amzn.to/3HQebBr
WD-40: amzn.to/3JohQXI
The shoes I wear, great for standing in the shop: Different Colors/Models:
Venture 7: amzn.to/3gEyDcG
Venture 8: amzn.to/36aLuBo
GT-2000 9: amzn.to/3sEbUTr
Laptop I edit with, decent specs for the price:
You can also search Wal-Mart: MSI GF63 This 10SC was $649 when I bought it:
amzn.to/33naNiE
Music Service I use, a good price to get started on your content journey before investing in higher prices:
uppbeat.io?referral=joe-bthr1
Uppbeat Artists: 1. Soundroll; 2. Hartzmann; 3 Ben Johnson
Video Chapters:
0:00 - Intro
00:50 - Disassembly
03:30 - Broken Flange
07:40 - Worm Gear Removal
07:50 - Base Removal
09:40 - Trunnion Arbor System Removal
09:57 - Top Surface Paint Strip
12:55 - Underside Paint Strip
15:49 - Transition to Top Resto
22:53 - Top Resto Complete
23:49 - Next Video Trunnion Arbor System

[@aalaworks]

Thanks.Thats really need appreciation.

[@dammyo6010]

Very satisfying to see the paint scrape off after sitting overnight.

[@ForestWoodworks]

I have some options potentially. Also, I borrowed a welder from a neighbor a couple weeks back just in case I'm the welding option... never done it before, so my first cracks at it were not pretty or structurally sound, but I'll keep practicing and get better. Either way, I hope this is the least of the opportunities encountered...I foresee more opportunities at the end of the series when I'm at the final stages of assembly and calibration, but until then. Thanks for watching and commenting Dammy!

[@ForestWoodworks]

Yeah it was fun too! More to come soon!

[@michaelconroy8060]

On something as lightly damaged as that, consider a vinegar bath. 4 to 6 hours, no more, then warm wash with a heavy baking soda content, then dry and polish. If much is needed, sanding can screw with the squareness of the deck, so avoid it until the end. The vinegar will extract any rust from deep inside the pores of cast iron. But more is not better, in terms of soak time! Chemical dip as little as possible to achieve the result and neutralize as quickly as possible once you remove it.

[@ForestWoodworks]

Thanks for the tips!

[@ForestWoodworks]

I experimented with the vinegar method on this base, which will be in the next vid; it worked wonderfully. Stay tuned!

[@ForestWoodworks]

I experimented with the vinegar method on this base, which will be in the next vid; it worked wonderfully. Stay tuned!

[@michaelconroy8060]

I also found that applying a thick coat of paint stripper first, like strypease, really speeds things up and allows you to reduce the time that the vinegar is left on the surface. That's helpful because the vinegar can seriously etch the metal if left too long. I applied the paint stripper, waited about an hour, got it all off and started the vinegar process. In addition to removing the paints and glue, for whatever reason, it soaks into the rust and sort of pre-loosens it. Looking forward to seeing your saw completed, great job so far!@@ForestWoodworks

[@ForestWoodworks]

@@michaelconroy8060 Thanks again. You and me both 😂

[@dammyo6010]

Do you know anyone who does tack welding to get that part fixed? I like how you redefine any setbacks as opportunities. Positive attitude.

[@rm-eq2ys]

I’m currently restoring my walker turner at this time! Can you tell me where I might get a fenc for my table saw?

[@ForestWoodworks]

Hey! Sure, definitely check eBay and Marketplace. Also, Jeff at Walker Turner Serviced Machinery in Connecticut may have one. I was able to get various parts from him that were not available on eBay or elsewhere. Here's his email: [e-mail] Good luck with your restoration!

[@rm-eq2ys]

Thanks so much buddy!!!!

[@ForestWoodworks]

​@@rm-eq2ysYW. Feel free to ask any other questions. I'm no expert, but I'll help if I can

[@andybuchanan3212]

Where did you find a vendor for the three small drive belts? I haven't had any luck. My belts are stamped AC TEX ROPE but the size or part number is not able to be read.

[@ForestWoodworks]

I haven't resembled this saw yet, I'm still on the paint phrase, but I still have the two belts that came with it. Mine are standard v-belts and I measure the length when they are in need of replacement. I've actually bought v-belts for my jointer from Amazon. Does this help?

[@garyvanrheenen181]

I ordered mine from either MSC or McMaster Carr, I'll need to do some digging to find my information. You can order from either one from their online catalogs. Shipping from MSC is expensive but they will put in on your doorstep the next day.

[@andybuchanan3212]

Belt size Dayton 3L160T ordered from Walker-Turner Services in Connecticut $11.00/each.

[@Golgafrinchamdent]

That slot next to the throat plate... is that factory, or did someone cut that? What's it's purpose? Thanks

[@ForestWoodworks]

Thanks for asking. That slot is manufactured into the table and it provides clearance for the elevation of the blade.

[@boriscalderon1678]

I don’t think that it’s for elevation. It probably access to the arbor to change the blade.

[@garyvanrheenen181]

If you still have your saw apart, would you mine measuring the circumference of your belts? I need new belts, the catalog I looked in has belts with outside length in even inches, my old belts measure 15 3/4". The catalog shows 15", 16" and so on. If you have the time and opportunity to do so I would appreciate it. Also, what color are you going to use?

[@ForestWoodworks]

Hey Gary! I still haven't decided on a color yet. But last weekend I was recording the trunnion disassembly and cleaning when I found a crack in one side of the trunnion system. Spent all week looking into fixing it, but I'm getting thin on options. If I can't get this repaired, the whole project is done. I'll respond later today with the belt size. Thanks for watching and commenting!

[@ForestWoodworks]

So the belts I have are 4L170. One measured 17" outside circumference. I put a piece of masking tape on the outside face of the belt and put a mark. Starting with the mark touching my table I placed a mark on my table. I then rolled the belt and marked the table again once the belt mark touched down again. Measuring between the two marks was 17". Does that get you the measurement you need?

[@garyvanrheenen181]

@@ForestWoodworks Hi, my belts aren't that wide nor that long, your machine is different than mine. I would suggest watching Ebay for parts, from time to time someone will take apart an old saw and sell parts. Thank-you for your reply.

[@ForestWoodworks]

@@garyvanrheenen181 Walker-Turner Services in Connecticut seems like the place to go. I spoke to Jeff today and I've got a replacement trunnion frame in the mail. Might be a good place for you to check out as they seem to carry a lot of replacement parts. I am so thrilled my project can continue! Check back soon as I get this trunnion system video done and uploaded. Take care!

[@andybuchanan3212]

Where did you find a catalog for parts and part numbers? What model is your saw? I have three small belts. 3/8" wide at top 1/4" bottom and about 15 1/2" in circumference.