Making an Ebony Wood Carving Knife

  Рет қаралды 115,165

Walter Sorrells

Walter Sorrells

Күн бұрын

Пікірлер: 157
@richardschaffling9882
@richardschaffling9882 4 жыл бұрын
Gorgeous knife
@creativewoodworker4300
@creativewoodworker4300 6 жыл бұрын
I like the shape of the Blade better than the hand made and I like the shape of the handle better. Thanks for the video.
@johnvanderwalker4830
@johnvanderwalker4830 Жыл бұрын
Great advice on the safety aspect of grinding. I notice you are staying clear of the buffer, as you know the buffer is the most dangerous tool in the shop, I know of at least one knife maker that was killed while buffing a blade. These tools are so fast and powerful, extreme care should be taken. Thanks for another great video.
@Kwakkaman
@Kwakkaman 8 жыл бұрын
"Friends who are less perfect human beings than me" - I'm stealing that one!
@dylanbuford6512
@dylanbuford6512 8 жыл бұрын
I know right? I'm gonna have fun with that one.
@anthonylewis2385
@anthonylewis2385 8 жыл бұрын
Ragnarok
@anthonylewis2385
@anthonylewis2385 8 жыл бұрын
Saxon
@anthonylewis2385
@anthonylewis2385 8 жыл бұрын
Saxon
@anthonylewis2385
@anthonylewis2385 8 жыл бұрын
Ragnarok
@gordo2690
@gordo2690 4 жыл бұрын
I follow you since long time! You are One of my First mentors of the knife making world, your tips are Amazing to me. Thanks Walter! Really thanks
@RatdogDRB
@RatdogDRB 4 жыл бұрын
Between the two, I think I favor the one you made with no power tools. But, not by very much. Both are gorgeous offerings.
@Oliver-ur5pi
@Oliver-ur5pi Жыл бұрын
As a carver, I prefer a flat grind so its easier to keep sharp only using a strop because i dont have to find the angle just hold it flat and slices through the wood with less friction. But still seems like a very great carving knife with a bit more sharpening😊i will definetly try something like this just with a couple less tools
@Mcphilsmith
@Mcphilsmith 8 жыл бұрын
Excellent work. Thanks for the perspective. I agree that the man makes the product, not the tool.
@dirtyginger7446
@dirtyginger7446 7 жыл бұрын
I think the combo of the ebony and brass pins is simply beautiful!
@andrewgoldstein1606
@andrewgoldstein1606 8 жыл бұрын
Tale of two knives. Always a good video. Thanks
@SharpWorks
@SharpWorks 8 жыл бұрын
Beautiful knife! 100% agree with quality not being different just the time. I made my first two knives by hand and they came out great, just took me over 10 times longer than it takes me now with my cheap 2x42 belt grinder (not nearly the best grinder for making knives but it works - it's all about learning your equipment and being efficient with it)
@georgebrown6540
@georgebrown6540 7 жыл бұрын
As always Walter, 2 fantasic knives, 2 fantastic videos, and a very happy viewer, thanks for sharing.
@jackreeves3001
@jackreeves3001 6 жыл бұрын
I love this video. You are a kick. Hilarious and masterfully skilled. What a combination. Thanks for sharing!
@chrisxx012
@chrisxx012 8 жыл бұрын
both of them are very beautiful works of art.
@creativewoodworker4300
@creativewoodworker4300 7 жыл бұрын
I always enjoy watching your master skills. Thank you.
@johnjude2685
@johnjude2685 5 жыл бұрын
I built my 2X72" belt grinder under $200.00 Great video here Thanks for the education
@OwlShadow
@OwlShadow 6 жыл бұрын
nice some good carving knifes cost allot so this video shows good content how to make your own really useful video
@thejackinati2759
@thejackinati2759 7 жыл бұрын
I love using ebony, so gorgeous.
@RAkers-tu1ey
@RAkers-tu1ey 8 жыл бұрын
Yep! That belt grinder point is no joke... I screwed up plenty on a borrowed belt grinder, but I have never had a problem with chalk and files... a little slow, but not so bad for a little project like this Thanks for the great comparison. R
@ScrapwoodCity
@ScrapwoodCity 8 жыл бұрын
Beautiful knife! The ebony looks really nice!
@camdenterrell6208
@camdenterrell6208 3 жыл бұрын
you all prolly dont care at all but does anyone know a trick to log back into an instagram account..? I stupidly forgot the password. I would appreciate any tricks you can give me!
@davianrohan6769
@davianrohan6769 3 жыл бұрын
@Camden Terrell instablaster =)
@camdenterrell6208
@camdenterrell6208 3 жыл бұрын
@Davian Rohan I really appreciate your reply. I found the site through google and Im trying it out now. Looks like it's gonna take quite some time so I will get back to you later with my results.
@rockautomatic
@rockautomatic 8 жыл бұрын
I want one so this may be my first knife build project. I'll definitely be somewhere in between the two methods you showed. machine tools with caveman heat treat. Thanks!
@jalanham1
@jalanham1 8 жыл бұрын
I greatly appreciate you posting the videos on the carving knife. I was wanting to make one for one of my son's for Christmas and this helped out a lot. Just finished it today. Have a Merry Christmas.
@chadmullins4373
@chadmullins4373 5 жыл бұрын
fantastic walter. huge fan. love the co trast between these two videos.
@Viewofandrew
@Viewofandrew 8 жыл бұрын
Love watching your videos Walter. Ive learned quite a few tricks. Thanks 👍🏼
@dcmccart25
@dcmccart25 8 жыл бұрын
Great work, Walter.
@landoncooley8392
@landoncooley8392 6 жыл бұрын
I love your videos! You do an amazing job describing how and what to do and then the science behind it! thank you so much! I enjoyed this video and the companion video, and I will be making my own carving knife here soon! thanks again for your videos!
@funshootin1
@funshootin1 8 жыл бұрын
Walt, these videos are alot of help.. I've fooled around on and off for almost 20 years making knives, modifying existing knives and depending on my motivation I've come up with a some really nice looking ones.. considering I've been doing some things wrong and mediocre equipment . recently I have gotten back into it and got a better grinder setup, an older Rockwell 1x42 and a 2x72 I made . with the right equipment it certainly is easier to remove materials and overall cleaner quicker work, I however have had a heck of a hard time relearning on this faster more powerful setup and frustration almost had me paralyzed, kept screwing up nice materials, making rookie mistakes. your whole series on tools, techniques and vids like this one have helped immensely. thanks for sharing your ideas and tips it's been a great help to me. looking forward to picking up a tactix as a new feild knife, best of luck in the new year , success at the new shop and I'm sure we're all going to enjoy the cnc vids to come with the new toy . Happy new year
@ottawasilver7720
@ottawasilver7720 8 жыл бұрын
love your tutorials, thanks for sharing your knowledge
@docdoc
@docdoc 6 жыл бұрын
As a woodworker I would choose the 1095 knife any time, carbon steel just works wood better, not sure why. love your videos great job !
@IMKINDOFABIGDEAL13
@IMKINDOFABIGDEAL13 5 жыл бұрын
Agreed. Plus the stainless is suck a pain in the ass to sharpen and strop
@knottyfoxmetalworks7691
@knottyfoxmetalworks7691 4 жыл бұрын
I used to rep for CutCo (who makes and sells laser-cut, stock-removal blades from 440A) and can attest to the sheer fact that SS should eat a whole satchel of Richards. It dulls faster and is more brittle than carbon steel.
@jamiehenricks6273
@jamiehenricks6273 8 жыл бұрын
Another great presentation mate
@harrydavis6903
@harrydavis6903 7 жыл бұрын
Great video. Very informative. Thank you much.
@kigynz
@kigynz 8 жыл бұрын
Merry Christmas we enjoy the videos form dunedin new zealand
@samuelconnolly4549
@samuelconnolly4549 8 жыл бұрын
Would you ever make a straight razor?
@_P0tat07_
@_P0tat07_ 8 жыл бұрын
Yes! Walter, please make a straight razor!
@RovingPunster
@RovingPunster 8 жыл бұрын
Excellent suggestion.
@MasterofPlay7
@MasterofPlay7 8 жыл бұрын
yes straight razor! But he needs finer grit stone for finish
@RovingPunster
@RovingPunster 8 жыл бұрын
Yeah, let's see some ultra grit stones and some stroping action. Stroping is like BDSM for knife enthusiasts ! (j/k)
@Ghostridergt
@Ghostridergt 8 жыл бұрын
Can I cast a second vote for a straight razor? in particular a kamisori since you have an obvious love for Japanese blades as do I.
@samaker4
@samaker4 8 жыл бұрын
Nice one, Thanks for the video Walter.
@parkerdude2
@parkerdude2 8 жыл бұрын
I'm just thankful no horses were harmed ! Oh yeah, Happy Holidays too !
@aliabazaid4293
@aliabazaid4293 4 жыл бұрын
Masterpiece
@SouthpawDavey
@SouthpawDavey 8 жыл бұрын
I have 3 kids so they would only have to wait for a year lol. Just been carving with a knife same design as this one the handle on the first one you made by handle i think is way better. Not the wood the shape much nicer to use. I was thinking of making some carving knifes and small chisels tools that I dont have thats how I got here ;-) I will be using steel from a saw blades and old drills. I have a small shop hobby. Thanks for the tips and videos.
@elund408
@elund408 8 жыл бұрын
piano keys haven't been made out of ebony in years, I would love to find a piano with ebony and ivory keys.
@legrandfromage9682
@legrandfromage9682 8 жыл бұрын
Thanks for the videos big man
@yuenglingandwhittling5167
@yuenglingandwhittling5167 4 жыл бұрын
This guys out here puttin helvie to shame.
@mattbrown5511
@mattbrown5511 8 жыл бұрын
Both are beautiful
@mornhaven8602
@mornhaven8602 8 жыл бұрын
nice piece
@DylansDIYWorkshop
@DylansDIYWorkshop 8 жыл бұрын
Sweet knife build! New subscriber! I just finished making a carving knife out of an old lathe parting tool from the 60's. Unfortunately I didn't make a tutorial video for it. I will next time though!
@larryfisher7056
@larryfisher7056 8 жыл бұрын
That's a beauty...
@MrBucidart
@MrBucidart 8 жыл бұрын
Walter, Merry Christmas, I enjoy the vids.
@grkuntzmd
@grkuntzmd 7 жыл бұрын
Nice video. Have you ever started hollow grinding a blade with a bench grinder and then finished flat-grinding with a hand file? This would allow doing the work without needing to purchase an expensive belt grinder.
@cove81
@cove81 7 жыл бұрын
i have to say that the one done by hand looks nicer. could just be the overall design that i like better.
@maartendekok2537
@maartendekok2537 8 жыл бұрын
It's all about the childeren :)
@eligriggs9221
@eligriggs9221 6 жыл бұрын
Now, do a video using bench top tools, such as a 1 in belt/5 in. disk sander, small drill press, toaster oven, and jigsaw for cutting metal and wood handle, please.
@sublime392
@sublime392 8 жыл бұрын
can you do a shop tour?
@jigpeligrino8790
@jigpeligrino8790 5 жыл бұрын
cleanest nails
@Mr99Sebastien
@Mr99Sebastien 8 жыл бұрын
can you do a video about metal coloring, you know when you heat up a metal and it changes color even when cooled down?
@jamesoconnell9396
@jamesoconnell9396 8 жыл бұрын
Seb Bianchi, the colors you refer to are a surface feature only. Any wear on the surface will quickly remove the color/ heat staining.
@Mr99Sebastien
@Mr99Sebastien 8 жыл бұрын
James O'Connell. yeah but it's alright if you use it as decoration, and u guess there are a lot of tips to master to get the best result possible
@jamesoconnell9396
@jamesoconnell9396 8 жыл бұрын
Seb Bianchi, too many tricks when bringing out color in metals!! For display purposes, cupric bearing metals have the widest pallette, followed by the iron bearing, best wishes, and keep curiosity alive!!
@billcallahan2830
@billcallahan2830 7 жыл бұрын
Have you ever made one with duplex stainless. New to sight. And if so pro's and cons
@bmxriderforlife1234
@bmxriderforlife1234 8 жыл бұрын
there are 200 plus year old swords with glued on handles so modern epoxy is nothing to worry about.
@remingtonsteele946
@remingtonsteele946 7 жыл бұрын
beautiful knife man :)
@Rocky1234732
@Rocky1234732 8 жыл бұрын
thanks for the vid very nice
@jackreeves3001
@jackreeves3001 7 жыл бұрын
I'm old I like power. Especially $3000.00 belt grinders.
@dg5450
@dg5450 6 жыл бұрын
Jack Reeves tw-90?
@radarnoel2683
@radarnoel2683 2 ай бұрын
I need one my fav wood
@Gorango27
@Gorango27 8 жыл бұрын
Would you ever consider applying to go on "Forged in Fire" for the History Channel? I'd be so cool to see you on there!
@willclark491
@willclark491 8 жыл бұрын
Walter, you have a buzz when you add the VO. I suspect your setup has a ground loop somewhere.
@suavebob
@suavebob 8 жыл бұрын
That is indeed a nice wood. Would you use that on kitchen knives given that you toss them in the sink to wash? Would you just have to wax it regularly (I assume it would come off in the heat of the water)?
@bmxriderforlife1234
@bmxriderforlife1234 8 жыл бұрын
from what i know from a bladesmith ive met, he says there are certain protective coatings you can use on the wood for stuff like that, ill ask my buddy to ask him next time he see's him if i remember. wish i had more info for you. hope this helps.
@suavebob
@suavebob 8 жыл бұрын
Thanks buddy
@Justapotato14
@Justapotato14 8 жыл бұрын
Suave Bob my friend always finishes his knife handles with true oil. it's a gun stock finish and is tough as nails. that being said, I would never leave any wood handled knife in the sink. just clean the blade, wipe it off, and put it away
@suavebob
@suavebob 8 жыл бұрын
Thanks for that buddy
@nickhadfield3192
@nickhadfield3192 8 жыл бұрын
If you have ebony (or pretty much any wood) on a knife handle, the best thing to do is simply clean the blade and then maybe a quick wipe with a cloth on the handle. Ebony is an incredibly dense wood (it will sink in water) and I can't imagine a small amount of water damaging it overly much.
@soundfxmaster
@soundfxmaster 8 жыл бұрын
am I the only one who thinks the blade looks better after eat treat before he repolished? it was like a temper colour hamon line
@andrewtrudeau5911
@andrewtrudeau5911 8 жыл бұрын
Is it possible to substitute a bench grinder for a belt grinder to shape the knife?
@seaderforge
@seaderforge 8 жыл бұрын
"It'll be ruint!" "It's be roont!" "It'll be rurent!" Ahhh, gotta love the South.
@michaellionart3675
@michaellionart3675 5 жыл бұрын
Matthew Seader oh is that what he said😂
@jingscrivens3978
@jingscrivens3978 8 жыл бұрын
Love Walter's wide ranging videos. Great stuff! Does anyone know why he can often be seen wearing a mask with what look like organic vapor cartridges? I often see people (e.g. Diresta) wearing these when welding too, but I naively assume that only particulate protection should be required. What am I missing? Thanks!
@vyjk
@vyjk 8 жыл бұрын
Badass.
@zacharymadison2489
@zacharymadison2489 8 жыл бұрын
Will ever use your wood lathe to make a handle for a knife?
@nickhadfield3192
@nickhadfield3192 8 жыл бұрын
It wouldn't make much sense to have a turned handle. Even a simple knife handle is very asymmetric and if you add in finger grooves it becomes quite complex. A lathe makes circles, which mean the knife can rotate in your hand very easily. He could potentially use it to make a segmented handle and then do final shaping by hand though. The only exception to that is perhaps a small carving knife - one where the position changes a lot depending on what angle you're using. Another channel called The Small Workshop made a carving knife with a turned handle and it looked pretty nice but any EDC or moderately heave use knife should have a normal type handle.
@rickyloco2349
@rickyloco2349 8 жыл бұрын
Walter what do you do with your knifes? do you sell them or do you colect them? if so could you make a video of your colection?
@luisermert
@luisermert 8 жыл бұрын
he sells them, how would it look like if he would be collecting all of them?
@rickyloco2349
@rickyloco2349 8 жыл бұрын
Awesome thats how it would look like. Thanks for the info.
@luisermert
@luisermert 8 жыл бұрын
ricardo velazquez No i ment like a giant box of knives because he made a lot of ´em
@nicholaskillmeier4895
@nicholaskillmeier4895 8 жыл бұрын
As a keen observer, I noticed someone awesome on the January Forged In Fire commercial.
@BigOb18c5
@BigOb18c5 8 жыл бұрын
Nicholas Killmeier are you saying walter is gonna be on forged in fire?
@nicholaskillmeier4895
@nicholaskillmeier4895 8 жыл бұрын
BigOb18c5 They skip around quite a lot on the commercials so it's really hard to tell even if you try to pause it on someone. You can go watch the history channel commercial and tell me if you see anyone you recognize haha.
@BigOb18c5
@BigOb18c5 8 жыл бұрын
Nicholas Killmeier so is it a newer commercial so I'm not watching the wrong ones lol
@nicholaskillmeier4895
@nicholaskillmeier4895 8 жыл бұрын
It's the one that says something like Forged in Fire returns in January. If Walter is on it, he's probably not allowed to talk about it until it goes on air.
@BigOb18c5
@BigOb18c5 8 жыл бұрын
Nicholas Killmeier is the commercial on KZbin because I can't find it anywhere
@billcallahan2830
@billcallahan2830 7 жыл бұрын
Now I understand when I got her the Huskavarna 372 xp chainsaw for our anniversary why I lost the house car and the saw. Lol.
@akhilrayan
@akhilrayan 8 жыл бұрын
plsssss make vid using a dremel!!! the only plwer tools i have is a drill and a dremel plsss 7_7
@MrHello12314
@MrHello12314 8 жыл бұрын
Akhil Rayan Omar you shouldn't be making knives anyway you look 9
@thenextstepp
@thenextstepp 8 жыл бұрын
Akhil Rayan Omar I have used a dremel in the past, when I was a teenager, and I can say you would be a lot better off buying a couple grinders and or some air tools. I can't tell you how many bits I've gone through using a dremel, could have easily purchased all my current air tools had I known better. Don't get me wrong the dremel is good for some things but hogging metal away isn't one of them.
@KhalainBear
@KhalainBear 8 жыл бұрын
When "roughing out" either wood or metal with a grinder, what a good grit to use? its something people often neglect to mention at this point, and get into the grits for final, you mention using a 40 for the metal, is that good for wood to or overkill?
@choonwahyee9101
@choonwahyee9101 5 жыл бұрын
Carvings wooden's, do have many kind of material 's , ebony 's ? Long lasting tool's ( Long lifetime 's ? Waterproof, fireproof 's , and unbroken 's ? ) bugs proof 's
@evodefrane63
@evodefrane63 5 жыл бұрын
You send me one the black ebony looks good I do native carving
@philkersey7301
@philkersey7301 5 жыл бұрын
can you make a butterfly knife
@tomsdreamshopworx
@tomsdreamshopworx 8 жыл бұрын
Gotta walk before you run. There's a lot to be said to starting by hand.
@2shotDerringer
@2shotDerringer 8 жыл бұрын
the lunch money 😂😂😂
@coreybananamanlanaghan9990
@coreybananamanlanaghan9990 8 жыл бұрын
@6:18 Netflix and chill? 😂😂😂
@sirdance-alotslayerofheret7597
@sirdance-alotslayerofheret7597 8 жыл бұрын
can you do a straight razor (for shaving)?
@saboione
@saboione 8 жыл бұрын
Walter the 1070 steel can be hardened equal to 1095?
@BernieFromTheInternet
@BernieFromTheInternet 8 жыл бұрын
do you think i can get away with 10 min a a gas forge at austenizing temps for heat treat of 440-c? i know i can ship it out for heat treat, but i still wana know.
@williambell7763
@williambell7763 8 жыл бұрын
Film Factory The proper way to treat it is to get It to 1400 f throughout, then ramp it to ~1900 for a half hour then quench, so wouldn't try it if you only got ten minutes, but if you think you can control the heat well enough, is say go for it, but I'm just a random guy on the internet so think about it before you do it
@BernieFromTheInternet
@BernieFromTheInternet 8 жыл бұрын
thanks, ill just shoot for at least a differential harden where the edge is hard, if it works ill try my best to diepell the "you NEED a $2000 oven to heat teat stainless"
@gabrielbrown6959
@gabrielbrown6959 8 жыл бұрын
cool
@nobilismaximus
@nobilismaximus 8 жыл бұрын
Walter for shits n giggles make a big interesting knife out of forge welded box cutter blades.
@MasterofPlay7
@MasterofPlay7 8 жыл бұрын
you need finer grit stones
@mojmirsvoboda6709
@mojmirsvoboda6709 7 жыл бұрын
Hallo,is this knife for sale please?How i can make order?
@urbanyeti659
@urbanyeti659 7 жыл бұрын
Every time you're at the belt grinder and move to cool the steel I think you're going to kiss the belt with your forehead.
@MrAndrewmcgibbon
@MrAndrewmcgibbon 8 жыл бұрын
what's not to like about Ebony? The fact that you can be cutting it and a big ol' crack just opens up. It smells like burnt hair if it gets too hot while grinding. I hate the stuff. Ironwood too!
@nowakjim
@nowakjim 7 жыл бұрын
Arm hairs were harmed in the making of this film.
@IsaiahLevinus
@IsaiahLevinus 8 жыл бұрын
do you still do blade commisioning?
@asbestosfish_
@asbestosfish_ 6 жыл бұрын
_I know what I’m making my cane out of._
@ginoasci
@ginoasci 5 жыл бұрын
I'm good with woodworking, but if your less than perfect, or.significantly less than perfect, or we could even say don't know shit like me when it comes to heat treating, what advice would you give so that I can heat treat a piece of steel or stainless with a can of Mapp gas and vegetable oil? I'm talking about not knowing what temperature the steel will be other than it's glowing, and just sticking it in the veggie oil. Is it safe to say the steel will be somewhat hardened, or harder but brittle? What should I expect to happen?
@michikipsy1951
@michikipsy1951 8 жыл бұрын
donkey snort didn't work either on 440C...
@germanserratos1630
@germanserratos1630 7 жыл бұрын
I feel like walter squints because the white back drop hurts his eyes aswell as mine
@q-tip7780
@q-tip7780 7 жыл бұрын
do you sell these?
@TheRokkis
@TheRokkis 7 жыл бұрын
I had belt grinder throw a knife at me when i was 13 years old and making a knife at school. Hurts like #%&#%. I was lucky not get hit by blade or in my face. Made me to be a little bit afraid those things for a while, so ended up doing everything by hand from that point on in school. I was really bad at it anyway, so probably better that way.
@dg5450
@dg5450 6 жыл бұрын
Wewd Anybody recognize that?
@supersam0308
@supersam0308 7 жыл бұрын
that cancer song is now getting to me :(* still love the content
@TheTillinger123
@TheTillinger123 8 жыл бұрын
is it really that important to wear a mask during grinding?
@lamproknives
@lamproknives 7 жыл бұрын
TheTillinger123 yes, pretty important, safety first, a lot of dust will go in your lungs if you don't wear one, and you don't want that 😝
@waaagh3203
@waaagh3203 7 жыл бұрын
Depends on how much you like breathing well :P
@caruser4
@caruser4 8 жыл бұрын
how does this video have so few likes?
@DylansDIYWorkshop
@DylansDIYWorkshop 8 жыл бұрын
Carlos Gomez it was uploaded yesterday
@caruser4
@caruser4 8 жыл бұрын
Dylan's DIY Workshop with 10k views, you'd think it would have AT LEAST 1k likes
I Made An Epic Carving Knife From These Old Scissors
17:20
VanHornArts Woodworking
Рет қаралды 342 М.
Making a Carving Knife and Chisels - Woodblock Printmaking Tools
17:59
What type of pedestrian are you?😄 #tiktok #elsarca
00:28
Elsa Arca
Рет қаралды 38 МЛН
Filipino Master Makes Legendary Blade from Literal Trash
11:26
Andrew Fraser
Рет қаралды 506 М.
The One Knife Sharpening Secret YOU Need to Know - It's Simple!
11:39
Walter Sorrells
Рет қаралды 133 М.
Making a Carpenter's Marking Knife - Simple Project, Simple Tools
12:57
Walter Sorrells
Рет қаралды 335 М.
Strops -Make One ,Use One
16:16
LINKER
Рет қаралды 382 М.
Forging a sloyd knife for woodcarving
13:07
Sam Towns, Bladesmith
Рет қаралды 44 М.
Thick EDC Knife - Knifemaking
15:23
Red Beard Ops
Рет қаралды 101 М.
Very Expensive Wood From 5000 Years Ago Black Oak | by @BelkoWood
8:52
Quantum Tech HD
Рет қаралды 9 МЛН
I made this carving knife
9:54
i made this
Рет қаралды 533 М.
Blacksmithing - Making a small carving knife
24:17
Torbjörn Åhman
Рет қаралды 4,4 МЛН