This vid is for information purposes only! So if your not good with fixing things you should take it to a gunsmith and I except no responsibility for your actions.
Пікірлер: 61
@scarecrowsnrX Жыл бұрын
Thanks dude I removed the mag safety and now I can drop the hammer without a magazine! Very helpful video.
@ramonhernandez22189 жыл бұрын
Excellent Video. Our Walther P22 Pistol Trigger was locked and I searched for a video on youtube hoping to find guidance to resolve the problem. I followed this video and I was able to fix the problem immediately. I commend the person in the video for doing an excellent job by explaining the step by step procedures. You really know your stuff. Thank You and GOD Bless You !
@alleric3579 жыл бұрын
Thanks and you'll notice the trigger feels better when you shoot....
@fairplayer9166 ай бұрын
You are a legend. Thank you so so much. Quick tip for reassembly: When putting the two halves of the body back together, you may have trouble getting the pin that runs through the hammer to line up. It took me longer then I'd like to admit before I noticed the hammer assembly and pin tilted away from the frame alittle bit so that the pin no longer aligned with the hole in the left (upper relative to you) side of the frame. Just make sure that pin and assembly is in square before trying to squeeze the two halves back together.
@Foodhat2 жыл бұрын
My P22 had a similar issue and this video helped me to resolve it. I can't wait to take it out to the range this weekend, I think that got it sorted! Thank you so much!
@jeffthompson15306 жыл бұрын
Thank you for this video! My p22 seized up and the trigger stopped working. Following your video I was able to get it going again. Can't thank you enough!!!
@Jbcmastertech10 жыл бұрын
Great video, My trigger lock locked just while shooting. So I disabled it permanently. Also took out the mag disconnect spring. Since I'm a Glock guy, I;m not used to all those bullshit safeties anyway. Thanks again. Great vid!
@alleric35710 жыл бұрын
Glad I could help, most of the other vids on this didn't give a good view of what to do. :)
@MyHollowpoint11 жыл бұрын
Clean that damn thing more often! Cleanliness is next to Godliness. This message brought to you by the FART council on Culture :)
@thiennguyentrung9 жыл бұрын
super clearly !!! great job !!! there is no trouble with safety . Thank you so much !
@Red05110 жыл бұрын
Great video, thanks - you allowed me to fix my jammed internal safety on my p22 without any trouble!
@alleric35710 жыл бұрын
Glad to be helpful! get rid of that mag safety while you're at it. :)
@skyler114111 жыл бұрын
dude this video helped me so much thank you!!!
@JimBrodie11 жыл бұрын
I only mention it as my TM Sig spring gun from back in the day had a similar looking construction.
@TheCrewchief0111 жыл бұрын
Great vid bro, you made it look easy.
@alleric35711 жыл бұрын
Really gummy is an understatement....
@Mr45Bullitt11 жыл бұрын
Excellent video Alex. In my favorites for future reference. Did you notice a difference in the trigger pull? I know removing the magazine disconnect makes a big difference on the Browning Hi-Power.. Thanks for taking the time for doing this and I'm glad you got it in the right hole:)
@caddilacjim11 жыл бұрын
Great video man.
@TRUNK.MONKEY9911 жыл бұрын
Nice vid..got one in urban camo w/o the trigger lock..thing'll eat any ammo except subsonic stuff
@alleric35711 жыл бұрын
Thanks Ross
@alleric35711 жыл бұрын
Glad I could help! :)
@JimBrodie11 жыл бұрын
Sems to be a theme with .22's, they're all built funny. This kinda reminds me of the old spring Tokyo Marui bb guns in a weird way.
@1957Shep11 жыл бұрын
22 ammo is really dirty. Get the powder residue mixed with oil and it turns into some really gummy crude.
@alleric35711 жыл бұрын
Nice, hadn't seen one in that pattern!
@alleric35711 жыл бұрын
....this is the same guy who put his AR trigger spring in backwards right?
@ebomey11 жыл бұрын
You know it!
@alleric35711 жыл бұрын
Most 22's are....but my next 22 pistol will be that M&P22!
@Dontfearthejoshjosh7 жыл бұрын
Thank you for this video. I still have an issue with the slide not passing the hammer. Do you know of a part of the slide or hammer that is alright to file down until it passes smoother?
@Bigredkarl4 ай бұрын
thanks dude
@bluetunder4011 жыл бұрын
Great video Bro!
@seankollenborn39593 жыл бұрын
Great video! Cant say that I would have opened this Swiss watch otherwise!
@alleric35711 жыл бұрын
Thanks
@alleric35711 жыл бұрын
Thanks Nick!
@alleric35711 жыл бұрын
Thanks David
@firearmscreditcardprocessi41611 жыл бұрын
cool video
@alleric35711 жыл бұрын
Thanks Jon
@alleric35711 жыл бұрын
Thanks Gerry
@ovi101311 жыл бұрын
Watched the whole Vid and I don't even have one lol
@alleric35711 жыл бұрын
Do they make a 22!?
@revolver8shot11 жыл бұрын
You should have bought a High Point I hear they have a great warranty. LOL
@gunnwild111 жыл бұрын
I literally just got back from picking up my M&P22
@alleric35711 жыл бұрын
Well yeah... with the laser attachment! lol
@bhrazy2x5 жыл бұрын
How did you pull the hammer back up atlike 17:10
@alleric35711 жыл бұрын
Thanks Bill, I think it seemed lighter, but I'm not sure.....need to shoot the fire out of it!! :)
@ebomey11 жыл бұрын
OH I will get it in the right hole!
@alleric35711 жыл бұрын
Would not know, never been much into BB guns
@alleric35711 жыл бұрын
It's better! :)
@gunnwild111 жыл бұрын
Seems like a pain in the ass
@alleric35711 жыл бұрын
NO....I get frequent head miles! lol
@alleric35711 жыл бұрын
...not as much as you...
@dreamquest-focusmusic69439 жыл бұрын
by glocks...
@circle-hkitchen17118 жыл бұрын
As in "beside" Glocks?
@alleric35711 жыл бұрын
That's wrong.... :)
@alleric35711 жыл бұрын
LOL
@alleric35711 жыл бұрын
LMAO!
@1165reddragon6 ай бұрын
This was an excellent guide to get rid of the mag safety! Thanks a lot!!! 🫡