WANNA UPGRADE THE PROTON PACK HEATSINK? OR DELETE IT? EITHER WAY, THIS PART IS CLUTCH!

[@buckeyejh]

I believe those little plastic tabs were originally created as wire guides for the internal wiring. Great work and fantastic videos, thanks for what you do!

[@Ghost1MoreMod]

Ohhh, interesting. Thanks for calling that out. I was genuinely curious. And thanks for the kind words!

[@blowfishlasagna3852]

I haven't made a comment on a video in about 3 years but i gotta say i watch this channel so much, im a life size spirit owner and your videos are still so helpful

[@Ghost1MoreMod]

Wow dude. That’s an incredibly strong compliment. I think I might quote this in an upcoming video! Appreciate ya man!

[@nomakewan]

8:06 Those are wire strain reliefs. You will find them in the wand as well, though Hasbro did not actually start using them for their intended purpose in the wand until the 3rd generation wands (which started with the 1984). Just like how the wire strain relief was not properly used in 1st and 2nd generation wands, the wire strain reliefs in the pack were not used properly either. Similarly if you were to crack your cyclotron lid open, you would see that Hasbro went to the trouble of molding in wire guides for all the LEDs...and then ran the wires across the top of them instead of actually having the wires sit in the guides. Guess the assembly factory didn't get the memo on how these wire management fixtures were intended to work.

[@Ghost1MoreMod]

THANK YOU! This makes complete sense now. Appreciate you sharing the knowledge 🙏🏻

[@nightmaremike136]

Big love from a fellow charm city ghostbuster! Using this as the guide to my upgrades

[@Ghost1MoreMod]

Congratulations. You win it! 🎆🎇🎆

[@NerdAffiliated]

It's funny how the smallest mods make all the difference! Great video!

[@Ghost1MoreMod]

It really does! Thank you 👍🏼

[@Doctors_TARDIS]

Next you need to do the "GB Modular Valve (Clippard Disc) Cover w/ Jumper Cables" from Redman Studio Workshop. The DIY kit is REALLY FUN to build out and is SUCH a huge improvement from the stock parts. The only thing is that you have to drill a hole right up against the lip for the cyclotron, and the wires for the lid are right there. So you have to be VERY careful and go slow. The only thing is with the DIY you have to paint the disc yourself. I used Rusteum 271473 Flat Soft Iron and it was almost a perfect match for the pack's plastic. But I also weathered my pack and weathered the disk too. So that blended it even further. (I weathered the pack with punky hair spary brown and black like Adam Savage has shown on tested)

[@Ghost1MoreMod]

It’s in the mail 🤫😎

[@valdivia8383]

@@Ghost1MoreModit’s worth it, and it’s a little easier to drill the top hole once you remove the motor out of the way

[@chainsawlovesmm]

Cool mod… will be getting one or two

[@Ghost1MoreMod]

Awesome. You’re gonna love it!

[@CustomComputing]

I just got my spirit Halloween pack and am looking for my first mod!! I’d love to grab this from you and I’ll do a video (on my other channel lol)

[@karsthotep]

Another great video man, Do you have any upgrades that you have done that you have not made videos of? For instance the speaker I see you have it listed from amazon, you already do that one?

[@Ghost1MoreMod]

Yes. Many shot, and many I’m in the middle of. A busy Halloween season and now with 2-in-the-box has jumbled up order of releases. You have a good eye my friend!

[@Redmemorys6]

I want to do this to my pack! Thank you for showing me how to do it. Now where can I get the heatsinks at? I can't find it in your description.

[@Ghost1MoreMod]

Was JUST informed REDMAN Studios is now taking over future batches. He’s taking preorders for January right now!

[@Ghost1MoreMod]

Also updated description with REDMAN’s pre-order link 👍🏼

[@Redmemorys6]

@@Ghost1MoreMod Thank you so much!!

[@Ghost1MoreMod]

🤜🏼🤛🏼

[@murfguy]

Judging by your shirt I'd assume your either with Charm City or Chesapeake. I'm not looking to win a part, but figured I'd say hello from the Virgina team.

[@Ghost1MoreMod]

haha what's up Virginia! Good eye! Thanks for watching man

[@cosmopoly]

Too bad you didn't get the metal replica of the heatsink, still available

[@Ghost1MoreMod]

Yeah, I purchased this a very long time ago… BUT, mods aren’t forever… Perhaps a future mod to a mod? 😁

[@NewMessage]

"I feel it's been apart... more than it's been together." Very Egonesque, really.

[@Ghost1MoreMod]

😂 Truth.