The power supply comes in several variants so you can check them out here bit.ly/3OZ1sCr Also use the code BG9ba45f to get a discount
@dronecenterrd11 ай бұрын
Thanks a lot, i purchased one and just as you the only and first thing ill do is deassembly it and put a piece of tape in that buzzer to make it less anoying
@TechTronic900011 ай бұрын
The damned buzzer! I need to do that also 😂
@topeye420211 ай бұрын
Yess "only" 18 screws and 3pcs 7mm nuts to loose and then put a blob hot glue on this buzzer helps. Just a tape wont be enough ; )
@szabolcs.j10 ай бұрын
press the output button for more than 5 seconds, that is the system settings menu, you can turn off the buzzer, option 4, search for pdf for more options
@topeye420210 ай бұрын
@@szabolcs.j Thank you, but for me it was only way too loud, a little accustic feedback as it is now with the blob hot glue on the buzzer is just fine.
@FiVa83-lv2sk5 ай бұрын
@@szabolcs.jtried it, no menu available.
@alanglassman62245 ай бұрын
To disable the beep when you change values, press and hold the adjustment knob until you hear a single beep.
@achilleasskkiller281411 ай бұрын
Great video! I’m waiting for mine to arrive 👍
@TechTronic900010 ай бұрын
Have fun!
@user-gj5su5er2z5 ай бұрын
how much did u get it
@filipors_sk3161 Жыл бұрын
great review
@TechTronic9000 Жыл бұрын
Thank you, I'm glad you liked it.
@abdulazizbinsaleh47302 ай бұрын
Is it good for power injection ? I already buy one and waiting for delivery 😅
@TechTronic90002 ай бұрын
I think that it will do fine.
@icenlerfirenler32910 ай бұрын
man i burst it, i was testing a module i needed 24 v for the supplie and 5 volts for the on/off pin i tested first if usb and normal output shared the negative and they did, so i plug it all put 24v to the module and then touched with the usb 5v + the enable pin the module did nothing and the Power suppli died now i press the on button and it chirps the fuse is alright the screen does not turns on i dont know what happened OCP was on, does the control board has any protection? or it is unrepaiablei opened it and all looks good and there was no magic smoke either.
@JomaStream9 ай бұрын
What is the purpose of the menu that appears when you hold down the out button? There is nothing in the user manual about it...
@TechTronic90009 ай бұрын
Yes, it seems it has a secret menu with various settings from which you might be able to disable the annoying beep, but there is no official info. You might be able to find some info about the settings from the other wanptek models.
@JomaStream9 ай бұрын
@@TechTronic9000 Thank you so much!
@darrencain762810 ай бұрын
Is it possible to disable the annoying beep on every twist of the dial ?
@alitopcu92209 ай бұрын
Yes it can
@TechTronic90009 ай бұрын
You should check the manual, mine doesn't have an option to turn it down, although I have found some info regarding WPS3010H model, "you need to press output button for 5 seconds to put the power supply into 'system settings' mode, then press the voltage knob multiple times until you get to program 4 (buzzer mute), and then change the value from 1 to 0 by rotating the voltage knob." I will later test this also on my model and see if it will work or not.
@kyrtgr75737 ай бұрын
@@TechTronic9000 So, does it have the option to mute the buzzer?
@wrongsideof403 ай бұрын
@@TechTronic9000 Thanks for the video. I've just bought one (the 30V/5A version) and it looks ideal for my needs. The beeper is far too loud so I followed the procedure above to mute the sound. This procedure does work, but the PSU defaults back to 'beepy' mode when next switched on. If you want the mute setting to 'stick', after changing the buzzer mute setting from 1 to 0, press the voltage knob three more times to quit out of the menu. Then all should be well. Does anyone know what the OTHER menu settings alter? Thanks again.
@ingbrzy2 ай бұрын
@@wrongsideof40 I have TPS3010 model.. to turn off beep sound when changing V/A I have to press the rotation knob for 5s.. but it still beeps when turning ON/OFF the device.. I am not able to go to the settings menu by long press OUT button..
@BigRalphSmith8 ай бұрын
If this is the 300W model as it says in the title of the video and it's set to 30V, it should output 10A, not 5A. "Watts" up with that?
@MartinVisser7 ай бұрын
You can see in the video that the label shows the model TPS305 (which is the 30V 5A model). They also make a TPS3010 which is 30V and 10A so 300W
@BigRalphSmith7 ай бұрын
@@MartinVisser And yet, both the box in the video and the title of the video indicate 10a and 300w. Either way, they need to get it right.
@MartinVisser7 ай бұрын
@@BigRalphSmith No big deal I think - there are multiple models in the range on shopping sites, and I'm sure are very similar apart from those limits.The main thing I wanted to get out of this users video was how the unit operated.
@DcPowersupply5 ай бұрын
I am a power supply manufacturing factory, You need to come find me.
@HECKAKYH-ADEKBATEH8 ай бұрын
No naked pictures, no like.. -__-
@TechTronic90007 ай бұрын
Hahahaah! Probably that is why my KZbin views are are low :)