Warden JKU | Getting 40" Tires

[@ColtonWillis99]

How the heck do you not bog out with stock gearing?? 3.21's or 3.73's at best... Wtf. Typically 40's call for tons, d44's at a minimum and prob 4.88-5.13/5.38's. how do you not break or bend anything?

[@vee950]

Dude I was thinking the same thing I have a jeep as well and he has 40s on stock everything also that's to much stress on that 3.8 by it needs to be supercharged need more torque to push them 40s

[@ColtonWillis99]

Intrinsic Motors d44 is a bit different then the d30... The may share housing but that's not the stress point...

[@ryderfrailey6448]

I’m just wondering about his gearing that thing must be a turd I have 37s on 3.73s and I hate it. There’s no power

[@kevingalarza760]

Minnesota boy here. You can just use your windshield washer fluid to spray the window and it will get the frost off

[@RolandtheThompsonGunner]

You're card works better than my actual ice scraper. Also get yourself an oscillating multi tool, they cut a lot straighter. At first I was using a Dremel but I just kept getting chopped up edges and it wasn't cutting as easy as I wanted it to. So then I used my multi tool and it was just like cutting through butter with hot metal.

[@LTUSATV]

Painting in the dark via iphone flash light.... yep done that!

[@Wolf9326]

Just a nippy -36°F here in northern Minnesota

[@huntercureington3561]

What’s your pinch Seam look like in the rear how close to the 40s? Love the videos btw. I’m in a 15 jku rubicon on 37s going 5:13s and 40s in the next month or two

[@GunJunky50AE]

Did you put any axles, re gearing, or axle trus braces to put the 40’s on? Or did you just put them on and call it a day? Also is your Jeep a rubicon?

[@javiermarante5344]

How many inches of lift is recommended to clear 40s with no rubbing??

[@realrickharrison3103]

You can fit them stock

[@ghernandez6457]

​@@realrickharrison3103😂😂😂

[@singletrackftw]

I’m a simple man, I see “40” tires”... I click “LIKE”

[@travisfuller6590]

How did that spray paint stick to rim without sanding

[@johnbrockjr9464]

70° and sunny in SoCal

[@BernardRoman27]

Are you running stock gears for the JK and pushing 40s on it? And how is the steering holding up, I'm sure it has a lot of stress without power assist.

[@realrickharrison3103]

He’s got a little Dana 30 turning those meaty things. Young bucks never cease to amaze me. STUPID

[@Jrm5814]

Real Rick Harrison he’s just not a pussy

[@ghen2245]

haha frozen we are 24 below in Indiana tonight lol

[@strikeright54]

im in ohio and its about the same here.

[@Jay-sz5dt]

Omg I’m in indy too 😂😂

[@josephgonzalez8352]

Hows your jeep holding up ? Still have your dana 30 or upgraded?

[@johnmunder7107]

Awww hell ya that looks killer! What did the sauce do now that you bought his wheels/tires?

[@DIYGUY_TY]

That's what I wanted to know.

[@BGE94]

I need a link to buy the proper shocks for a 6” lift on my Jeep if any can help, please. 🤷‍♂️ Great build by the way 👍

[@BAWLS2894]

Size lift and tires? Also do you know what was the over all height of the jeep with the size lift and tires you had?

[@michaelangelo4147]

Could be a fuse the Jeep is still pretty brand new right?

[@roccopaolino9621]

What are you running for gears right now? Have you added any beef for those 37s or the 40s now?

[@adammowery1981]

We’re those stock axels....? RIP if so..

[@SuperSam7777]

Can’t wait for the front axle beef and finishing the suspension.

[@anthonyjordan3634]

What do u mean???

[@ChillWeezy]

Very nice... how is the drive with the stock axles with those and the steering?

[@ChillWeezy]

@@IntrinsicOffroad oh okay, cant wait to see the video of that.

[@junowilson4992]

That farm truck painted candy red would look sick lol

[@formicola333]

Rock lights in the future?

[@strikeright54]

boy would you struggle up here with us. lol. when its that cold dont need windows down.

[@aaronbadboyflexxer9173]

What's with the engine light on?

[@redlineak]

iced up windows is a daily think up here in alaska even the doors and the locks freeze up

[@Fixin-To]

Why are you ‘wet sanding’ dry?

[@nickknights6186]

What size lift do you have

[@joeythepirate8120]

What name/brand are these new rims?

[@IntrinsicOffroad]

Atx slab

[@kevinvillatoro3760]

Long Island here awesome channel ! Should’ve powder coated the inside commando green 👍🏼

[@russkielol]

Dana 30 axle?

[@realrickharrison3103]

Yes

[@chasejohnson2550]

Lol move up north I live in Indiana and I’ve had the doors frozen shut on mine😂

[@mojavedesertsonorandesert9531]

Nightmares do come true!!!😂 Awesome rig, and I'm a Toyota/Hilux fan!✌️🏜️

[@alexwatts8224]

What size lift

[@paulhudson6138]

Well we didn't get our snow wheeling trip today!!

[@evintacy7272]

I love it bud!! Great add on 40s ✌️😁 I want set those wheels for my 2016 JK 👍 But Jeep is looking sick my friend!!

[@travisfuller6590]

It will eventually come up

[@iddddaduncan]

What gears did you put in it?

[@vee950]

I see alot of comments about him needing 1 tons but people have to realize 1 tons are very heavy as heavy as those 40s so the rig needs engine upgrades because that 3.8 doesn't have enough torque to push heavy ass 1 tons and 40s

[@deadbolt9019]

Plenty of people run 40s and tons on TJ/LJs which have less power. You just need proper gearing and realize you're adding hundreds of pounds of unsprung mass. It's a jeep not a race car

[@vee950]

@@deadbolt9019 racecar lol you have to understand its about torque and people think gears solves the problem no everyone I'm around have Chevy or diesel swaps or strokers running 40s & 1 tons wheeling a buddy of mines just did a 6.1 hemi swap I his jk 40s &1tons

[@vee950]

@@deadbolt9019 something mild like a chip and intake will make a difference for you but nice rig dude

[@PoisonSpyder038]

Sick good to see a 40s video 🤙

[@johnhowzeiv1856]

Probably my favorite jeep only because mine is that color

[@evanb.9122]

Yo. I live in Alabama also. This weather is crazy.

[@aux1z11]

Now all you need is a set of 5.13 gears

[@walker0490]

Do you live in Hoover

[@chadkennedy529]

Your front end is going to take a major shit man, i'de be saving some money and getting everything D.O.M and some axel trusses. Also get some good wheel seals the factory molar ones hate extra rotating mass.

[@manillafresh57]

Those fenders look like doo doo, but them wings look good

[@maxhayes-garcia2580]

It's a job well done. Fantastic... Saludos de Ponce, P.R

[@swarbrickjesse]

Why not just get a nice pair of aluminum fender flares instead of cutting stock ones every-time

[@swarbrickjesse]

@@IntrinsicOffroad Fair Enough

[@the-bu3lb]

gears 373 or 321?

[@JM-rp9qf]

Definitely not with 40s

[@patrickjamesmcb]

I don't NEED 40s, but I WANT 40s

[@kfx700dirtking]

Fucken savage! No fucks given. Let’s see how long the jeeps drive train lasts.Great videos! What gears you running?

[@jakej4x434]

Ur gonna need tons or something. But does look pretty dope my guy

[@hakenkreuz7076]

Didn't even show us what it looks like out of the garage after all that time watching this video

[@griesrt]

use jack stands guys

[@griesrt]

@@IntrinsicOffroad freedom to fuck yourself up is true freedom

[@raptor700rnoe]

Robert Griesmeyer shit talker

[@Hay-tn6hz]

Don't be that way Robert. Its not a good look on you.

[@griesrt]

​@@Hay-tn6hz Getting squashed and ending up on "faces of death" isn't a good look either.

[@carlmarc3877]

damn these instrumentals are fire af

[@kyleball4004]

Is it safe to run 40s on Dana 30 with wheel spacers?

[@chadkennedy529]

Not really... It's putting a ton of stress on EVERYTHING. However if it just stays on the road it might hold up.

[@chadcason6448]

Great video and amazing jeep but BBQ wings really lol jk. Nice set up

[@zumezoom9593]

running 40's with stock brakes?! ummmm.... why??

[@realrickharrison3103]

He’s got a little Dana 30 turning those meats.

[@zumezoom9593]

@@realrickharrison3103 and dana 30 will be enough?

[@realrickharrison3103]

@@zumezoom9593 NO LOL

[@zumezoom9593]

@@realrickharrison3103 yeah i wondered about that...

[@brandonlamson8101]

💚

[@michaelangelo4147]

No just let the defrost melt the ice

[@oscarhernandez2773]

Better gear up 💪

[@Jacob-fv8mz]

i only love 4 door if it has a slanted soft top, idk why. anyway, beautiful rig

[@sector783]

🔥🔥🔥

[@lifewithmillie8582]

Daddy’s money.

[@realrickharrison3103]

This is the definition of daddy’s money. Daddy wouldn’t agree to buy tons so he had to stick with the stock axles

[@bryanleslie4513]

Gotta get rid of that music, it sucks magor time.

[@ricardo_islam314]

Hehe I’m the 400th like 😁😁😁

[@JM-rp9qf]

Stripper jeep lol

[@alexwatts8224]

What size lift