WARRANTY? WHAT WARRANTY? | Scrap King Diaries

[@dannyboythepipes]

The only picking lines Harry’s been to see are the ones on his kitchen table over the weekend 🤣🤪

[@8rich8]

Partying till 6am….. there’s a reason he fidgets with his nose lol 😆

[@bp9854]

harrys been on the gear

[@mountjarvis]

100% been on the booga sugar

[@bill0273]

Colombian cold 😂😂

[@georgesmith7776]

Hope you get the Taurus up and running. We were thinking of getting one but definitely sticking to our leforts now. Best of luck

[@kevinraines4318]

ring Taurus up to order a new one and see how that goes

[@Piglife101]

Love the random chats with Mr Picking 😅

[@scooped85]

Underated channel, hopefully the turus situation gets resolved, must be the most expensive paper weight in the UK!

[@Tommygreycj1990]

Harry got the Colombian cold 24 7 hahaha

[@Tommygreycj1990]

Ps me and the boys and every scrap dealer I know up and down the country for the last 10 yrs I will tell them not to ever buy a taurus.😢

[@HaimashSmith]

Love it guys keep scraping

[@Phuc_Yhou]

Keep up with the recovery Richard, there's a wall of brass waiting to get weighed in when you get back mate 👊👍

[@DRAINTVofficial]

Correct me if I'm wrong. Those rads you show on the torus are for the coolant. The issues you mentioned from the engines sounds like they are oil related. Oil overheating is the killer on. Oil getting too hot is what I'm thinking is the cause of the issues you been having.

[@DRAINTVofficial]

People talking about dry sump. This won't solve the hot oil issue.

[@topgun6025]

You spoke about the old Taurus and it's just like my wife old and haggered but yet will still get up everyday and feed us all and take care of the day we're as if I was to go for an upgrade that would require so much more maintenance 😂😂

[@liveforgolf4764]

You know he was on a come down nose all blocked hahah 🎉🎉🎉

[@philphil3707]

I wonder if an air intake snorkel would help the intake on the engine to reduce warm air being sucked in and help reduce the air and debris. as well as the additional fans on the radiators

[@eddiewebster673]

Great video harry, i might drive over there 1 day its about 30 miles from where i live but your prices are better so ill wait till ive got quite a bit of copper stacked up to make it worth while, hope the taurus is up and running soon, keep up the good work 👍👍👍

[@carllockpick6179]

Harry, are the new fans, suckling or blowing ? Would it not be better to have the fans, connected to air ducting, aiming at the hotter areas, of the engine compartment.

[@jasonboulton2610]

Happy Sunday Harry and Co

[@Redchannelconditions]

You need Beconase Harry. Perfect for allergies. Really cleans out the nostrils. It’s a spray.

[@thefrog7803]

That was good can't wait till next Sunday ❤❤❤❤ 😂😂😂

[@miky-275]

Those rads on the side you showed are hydraulic oil coolers. so if the engines are sitting be hind them. They deffo not getting much cool air situated behind the hydro rads,

[@adamprice5669]

party on the weekend, running nose on Tuesday coincidence i think not ❄️❄️❄️❄️

[@iandrew6347]

Great video guys

[@RichardPlaice]

Good video thanks 😊

[@SollersScrappingandDiving]

If I were Rich and came back to my hoard cleared out I'd be livid 😂🙈 I like it when yards display old stuff like 'The old Anvil yard' do, that mangle is lovely, and the tyres are nearly new......uh oh, maybe I'm a hoarder too🤣 (If the claw doesn't fit anything, that one can go though😂)

[@bradyc-nn8su]

bloody love this u lot

[@TheBeardx16]

Thumbs up as usual. Hope you can get back to normal soon guys

[@ashleymatthews]

Now the yard is full tissue spreading his germs😂😂😂

[@HelenA-ju5zf]

How vocal was Lee this week!! But does seem like another hard worker. Where is Richards pigeon??

[@carltonkeenan187]

😮 Lads i'm from Reading & only down the road from Taurus so if you want me 2 make some noise on your behalf just gimme a shout & ill head down there!...

[@eliaguastini7960]

As an Italian scrap metal dealer I feel bad for you, hope everything’s ok with the shear...is pretty sad seeing one of the top shears in the world in such bad conditions. Keep fighting guys, we're all by your side.

[@powellpker]

Found the taurus employee

[@eliaguastini7960]

@@powellpker man I know pretty well the owner of company, Giovanni, even if I own a different brand shear...I'm sure they r trying their best to help Harry, well I hope so...here in Italy they are well well respected for their amazing after sale services. I really can't understand what's going on in this situation.

[@EddieWatts-j9i]

Make sure the additional fans are complimenting the fans on the engines not stalling the airflow

[@ryansoper]

Somebody send the guy a hi vis hankerchief for gods sake 🤣

[@jasonputt390]

Hi Harry As a firearms holder myself, what have you got?

[@redpill3145]

The Taurus needs a dump valve and straight pipe it will work a treat

[@Steve-bk9gu]

Good evening all

[@ianjbuilder7655]

Nice vid again love this channel not long enough vids ❤❤ will put a mr nosey mr man and a counter in the corner for each time Harry rubs his nose 😂

[@Dommo1997]

I think you could have vasomotor Rhinitis, it can be triggered by odours, alcohol ingestion and some spicy foods, it may also be linked to asthma if you suffered with it as a child, have you tried any nasal sprays ? Your doctor should be able to prescribe stronger ones that you can get off shelf 👍

[@dempsey1357]

Hope Rich's doing well even if he's the adopted child 😂😂

[@andybrice3656]

Harry, Is Taurus part of Ferrari? As you keep saying that when it works, it works brilliantly. But then it breaks a lot and is an expensive, timely mission to get fixed. Hmm, so Ferrari 🤣🚘

[@jaybe3bailey587]

Lee's a good replacement but he's not rich is he hopefully see you back on soon Ricardo

[@milliedraine]

we have cancelled our order from taurus.all the best harry

[@williamralph8613]

Hahaha yes boys ❤

[@topgun6025]

Who chooses the advert for you video love honey adult toys 😂

[@mrambitous562]

Harry you need to lay off the pub grub 😂

[@damionbowers393]

I used too work for Perkins in Stafford what engines are you using? In-line 5 or 6 or v8’s or v16’s

[@chrishone8167]

Also stay of the NOSE CANDY :)

[@TheThebinman10]

Why not buy a external generator to run the electricity in your yard and not be conected to the grid ,just a sugestion

[@SkidM3rks]

That would cost so much more money

[@EddieWatts-j9i]

We had to run a plant on generators for a couple of weeks. The fuel cost was horrendous.

[@andybrice3656]

Ricky T, get well soon. I had a fusion in the base of my spine brake as a child, which was then pinned. Just not where they wanted to pin it. Unfortunately my spinal cord is in their way! Take it from me that a lifetime of painkillers is not the answer. You have to get better! Harry said that these messages are your Morphine. So please from me, get off ya nut on this one 😉

[@Stevesmods]

Ok so , Engine is driving a gearbox that drives a big pump i assume ? why didnt they put the engines up high where the booth is ? the whole maching is driven by hydrolics . no fan or fans in this world is going to work , or this is a big or a bigger pump to take the strain off engines if gear right you could run them engines quite cool that way . personally i think the engines are to low and too far forward . heat off the chopper/crusher its self will fry the engines as when you compress metal it gets hot . hope you can read this and see what i mean ,

[@iandrew6347]

Do not forget to like and subscribe and share

[@iandrew6347]

Hi

[@FlipNheck]

So you’ve been on the bash 😂

[@martuhurley]

Will, I love the new mustang. Can you ask harry if I can weigh plugs in or am I better off smashing them up and weighing the brass in with my other brass. I been saving my wire and copper and batteries up most of the year to come and see you guys before Xmas. Coming from Cardiff so wanna try and make most money. I’ve split my copper into dirty and clean. I hope rich is back by then

[@JasonHolmes-uy8xq]

U want go at least month before Xmas all scrapyards put prices down for the Xmas as loads people cash in at Xmas they blame market go before get more money for scrap

[@martuhurley]

@@JasonHolmes-uy8xq thanks. Maybe I should go September

[@e.n.l1976]

Plug's you're best off smashing the plastic off and weigh in the brass with your other brass, if you got a few of them it's worth the time

[@antonyleemulvey8226]

All year round Columbian cold 😂

[@Fjdndhkr]

Weigh that taurausanaurus in mush 🤣🤣 all that downtime costing to have shit plug for your gear = drippy nose 🤣😂🤣😅

[@jonpreece6948]

Change the name from Taurus to trickedus 😂

[@ZrTubz]

Can you not sue them for not honouring there warranty?

[@malcolmgray8910]

hassells engineers maybe camera shy but you you showed there work van number plates do CAT will know who they where lol

[@topgun6025]

What is there a scrap metal yard right nx door to your one see the sign at the beginning how do they get ant business with you there 😂

[@markkearney959]

I thought the very same

[@SollersScrappingandDiving]

Haha I clocked that sign too

[@e.n.l1976]

Because their queue is so long, if you're not a pro tatter and doing it on the side e.g . plumber/sparkie you're not going to queue for an hour+ to get in, time saved makes up for rates not being as good. I always use them if it's a half manageable queue but when it's snaking all the way to the end of the road (it gets crazy long and moves slow) I go to the other Taroni's at the end of the road where you're in and out quickly.

[@SollersScrappingandDiving]

@@e.n.l1976 I get that, if I pulled up at my yard and it had a queue like that I'd be turning round and going home again 😂

[@Phuc_Yhou]

Must p them off that so many are waiting outside their yard to go into Taronis 😂

[@chasmcl42]

Taurus is unhappy with the nagative videos what a cheek they lapped up the videos you put out before it turned out to be scrap😤 and Harry give Lee a clip round the ear i bet he doesnt give your dad any snash. And richard is you see this hope you are doing well🙏🙏

[@millsy2580]

Love the videos but I bet Harry can’t go without saying you know what I mean in one whole episode???

[@iandrew6347]

I don’t understand how your electrician can’t get his hands on. Any 3 phase cable it’s stock items in any wholesale because I am a electrician I think someone is pulling the wool over your eyes

[@steviepaton2899]

Yer baws mate

[@bp9854]

not the size cable required to feed the taurus lol

[@mountjarvis]

@@bp9854 The cable will only be to feed the fans, the electrician is chatting shite

[@cammos]

​@@bp98543phase is 3phase so wiring for 3phase will b the same doesnt matter if its a 3ph drill press in the shed or a 300billion tonne car crusher its 3phase

[@chrishone8167]

Quietest time to bring in non ferrous??

[@Dommo1997]

2:37 AM

[@Natalierenyolnds]

toras shit

[@lzvinxlin1898]

Colombian flew on the .2

[@roberthowkins3097]

Hi