Watch It Float // +Mix Weight & Thrust // OasisFly 25

[@CCC0122]

Nice flying Nick! And it looks like your getting even buffer! Keep it up!

[@MrGunawan79]

Finally I found my kind of style quad thank's for this video good bles you🙏

[@loganbentley4839]

Yea I would definitely like to see more about this quad but I also just ordered it last night😊😊

[@jamesmichaelcabrera9613]

I'm seriously thinking of this getting this drone. I already have the sub 250 nano 1s1. This drone looks like it rips

[@IamGygz]

Love the quad. But I think the emax 2.5 props would make it a lot better. Those props can take a beating

[@NickBurnsFPV]

Indeed. We don’t often see non emax quads using emax props. Wonder if they are to costly or HQ and gemfan have seriously cheap feels with manufacturers

[@IamGygz]

@@NickBurnsFPV it's not expensive at all considering how solid they are. Still using my first set of emax 2.5 inch props. started using them about 5 years ago. used gemfans,but sad to say they didnt last a week

[@jamesmichaelcabrera9613]

I like emax props. They're quiet too

[@trxrich]

You could put a zip tie tight on the battery lead just under the top plate and not attached to anything. It then wont pull through the top plate and put stress on the batt pads if you get a batt ejection.

[@damianwyczakowski2491]

It is very heavy for 2.5 inch. I would go for 3.5 inch... my geprc smart35 was 249 grams with dji o3 And 850mah 4s battery

[@strykerfpv]

yeah the smart35 is too light. this will feel more like a 750g 5in in terms of disc loading

[@jandomingo9806]

​@strykerfpv interesting. So I have a 2fiddy 4inch running 1804.. gemfan 4023.. if I ran 3.5inch gemfans it would feel more like a 5inch but smaller?

[@strykerfpv]

@@jandomingo9806 if its at about 300g yeah.

[@kellywasden]

Small kwads like this should have a mandatory stubby vs risking damaging the antenna or providing the tpu with the whole package.

[@NickBurnsFPV]

I antenna tube is pretty flexible . Surely that will help protect the signal end of the antenna?

[@StrillLife]

Do you like this one better than the Avion 2.5 you recently reviewed? Looks like it's heavier which may be better for freestyle and tossing it around.

[@vanlifefpv6340]

He does but can't answer here.

[@northerntierfpv8947]

Have a great Vacation!

[@NickBurnsFPV]

Thank you!!

[@Nspecthergadget2010]

Yes sir, nice flying! Pretty tuff frame, I like it. Price is a little steep for me but put a vista in sold. Great show and tell.

[@chrisbee5481]

Looks like an other DJINN F25 receipe. Small props for low disc load and more throw.

[@Lance57H]

This is going to be my first quad, could I run it off a 3S 750mah? I have a ton of RC helis ranging from a Specter 700 to a OMP M1. My Goosky s2 and OMP M2 use 3S 750 mah batteries. I'm thinking it might be good to start with 3S to get use to FPV with but was wondering if that would be a good idea or if 3S wouldn't have the voltage to make it fly very well?

[@NickBurnsFPV]

We could but the control won't quiet be as it should. This is the primary issue with running a lower voltage (fewer cell battery). The PIDs and filters are setup for 4s, running 3s it will likely feel a bit loose or even sloppy on the controls. 3s will still work, it will just fly different.

[@HunterRotondo]

What's your favorite backyard drone for freestyle? I bought a 5-inch with DJI v2 goggles and a DJI FPV controller. Needs an entire football field to make sense flying it. I was thinking a 2.5 for the front/back yard. Would love to hear your opinion on the best size and drone for front/backyard flights.

[@NickBurnsFPV]

for my space and style I like 2inch 2s quads. Something like the flywoo flylens85, bassline, and rocket race.

[@Mxoderberg]

Looks interesting! I'm looking for something like this. A sub 250g with a traditional "freestyle frame" and 2,5"-3" props. Right now the Stingerbee and this one is the two i can find that checks all the boxes. Waiting for your Stingerbee review....😉😉

[@NickBurnsFPV]

I am not sure the stingerbee will be coming to the channel.

[@TheDepep1]

If I were to buy the vtxless version of this drone and pair it with an hdzero whoop light vtx, do you think the flight time would increase to around 5 min for a freestyleish flight? its roughly 35 grams lighter. I only have one drone, the flywoo nanobaby v2 hdzero, and I'm looking to get something bigger that gives similar flight time and not too big that it will scare people.

[@NickBurnsFPV]

Hmm it will likely be close. Saving more than 10% in weight should get over 4 minutes in on a 650mah the 720mah should be pushing 5 minutes

[@TheDepep1]

@@NickBurnsFPV Thx. Ill add this one to the list of potential builds.

[@kevinthealienfpv]

In my opinion, it would be better to opt for a race v3. It weighs a gram more than the whoop lite, but they output about ~15% from what I've seen, which applies a small bandaid to the whoop lite's lack of range.

[@danfpv1479]

Saw that there is an oasisfly30 also. There is a big difference between those two? In flying characteristic etc?

[@NickBurnsFPV]

I wouldn't think the differences would be huge. But in the case of basically the same quad with larger props, we would expect to see longer flight times, and more overall thrust, but producing the thrust or "response" would be a tiny bit slower.

[@apachesmokewoundedsniper]

Great video Nick, have a wonderful vacation and stay safe

[@ronniequalls7217]

Nick you showed out on that flight 🎉🎉🎉

[@iceboundzeus]

hi. with 4s lipo and o3 at how many volts per cell do you recommend to land ?

[@NickBurnsFPV]

The goal is to land and disarm with the battery recovering to 3.5v/cell.

[@iceboundzeus]

@ tnx

[@cubefpv]

On the product page in the Specifications image they state BLHeli 32. It would be interesting to know if this really is BlHeli32 and if so then not that dev version we have been hearing about.

[@vanlifefpv6340]

It's the dev version, don't buy it!

[@amin0_acid310]

Nice looking quad. You sure took it for a rip too. Shame about DJI only, but easier stock to manage for them. Not sure I like these USB dongles, but not a deal breaker. Just glad its not another ducted micro. Thanks for the vid!

[@mattheww9656]

Are the 2 holes in the 3D-printed back piece there to support the WS Moonlight? Thanks for the review Nick!

[@NickBurnsFPV]

Potentially but it could also be for other receivers

[@雍正-v5s]

Yes, the two holes on the back end support MoonLight, and other receiver antennas can be compatible with the complimentary front antenna bracket

[@lifeinmotion3339]

I’m interested in the flight controller, how that connect to the o3 air unit whether it’s just a plug and play or have to solder it on job.? As I’m upgrading some of my frames to dji. Thanks mate. Enjoy your vacation.👍🏼😎

[@雍正-v5s]

The FC used by it is directly connected to Dji O3 through the line, and does not require additional welding, only needs to be set in BF after installation, or directly contact customer service to ask for the corresponding firmware

[@Nik_FPV621]

Hey Nick, great vid. I wonder whats your fav micro over all that supports HD and whats your fav 1s HD micros (not necessarily whoops)?

[@TheRoulette77]

hoping your vacation flys by in super slow mode !

[@nickrich710]

Have fun on vacation 👍

[@flasholiver69]

Enjoyed your Video, thank you! I noticed they sell a version without vtx & camera. Bet I could fit an HDZero vtx & Micro cam on this Badboy. This version only $179! Sound kind of Versatile? Again Thank You!

[@NickBurnsFPV]

yea, we can often put an alternate video system on, especially if we can do a touch of DIY to make it all fit together nicely.

[@FallenSaint876]

Rarely this early. Love your videos Nick.

[@IGoByD3lta1918]

Does this drone come with the O3 do do you buy it separate?

[@NickBurnsFPV]

With the link in the video description it is available with two different receivers, with and without the O3

[@DanteKeith]

How would you compare this drone to the Avion 3’

[@NickBurnsFPV]

The avion 3 is a larger propped quad so it will have generally more thrust/performance and longer flight time. But with that depending on the flying space and lower performing quad might be a better fit. All depends on the the flight type, flight skills and flight desires.

[@MrCrowleyandhisdrone]

cool drone, nice ripping peace🙂

[@sebcbien263]

Hello everyone, is it me or this quad can accept 3" props ? to me it looks like there is more than the 6.4mm needed to go from 2.5" to 3"

[@NickBurnsFPV]

No it can not accept a 3" prop. The prop will not clear the metal side piece of the nose of the quad. Pretty much universally BNF quads come designed with the largest prop it can run. On those that can run a larger prop it also requires an arm change to accept the larger prop.

[@sebcbien263]

@@NickBurnsFPV Thanks a lot !

[@lynsmith1096]

Good review Nick. Have a great v`cation.

[@CCC0122]

I live in AZ, how did the air unit hold up in the heat?

[@NickBurnsFPV]

Decent but still during some flights I would get overheat warning just as I would take off. Typically it cools quick if we can get in the air right away. Temps here been mid to upper 90s recently

[@CCC0122]

@NickBurnsFPV I tried flying the Meteor75 Pro Hd, in about 110 and the thing was hot to the touch in 1 minute. I thought, it's probably too hot for a digital vtx..? Enjoy your vacation

[@prathmeshdk]

The electronics are definitely from SUB250 Dollyfly 25. The frame is only the new thing.

[@chrisbee5481]

Nick, have you noticed the props are actually a bit larger than 2.5" ? Got these on release and noticed they are more like 2.6 or so

[@NickBurnsFPV]

Oh I didn’t measure them. I will have to check that out when I get back home

[@SilverFox80521]

Why is that so much louder than the Babyhawk? Is it 3.5” vs 2.5” or is it those silky smooth Avant props? You should try Avant props on this Nick 😉

[@mcfly0752]

Hi Nick, do you think there is enough Space for a Moonlight system in the back?!

[@NickBurnsFPV]

I do thank there is room for the moonlight. Not sure about the mounting. Do the mounting for the O3 and moonlight have the same dimensions?

[@stack-z2o]

It's enough

[@mcfly0752]

@@NickBurnsFPV yes, It’s 20 by 20

[@Sub250official]

It can fit WS Moonlight

[@paulgeorge1069]

The crash footage looks like my highlight reel 😂

[@KcCake]

Interesting quad! 5:12 looks like the acceleration is quite slow. You throttled up and then quite some time later the quad actually responded and punched out. Seems a tad heavy/low kv

[@vanlifefpv6340]

It's a tank but the arm snapped in a hard landing. This model is garbage.

[@KcCake]

@@vanlifefpv6340 tank as in weight im guessing? Not durability

[@vanlifefpv6340]

@@KcCake Yeah it's a tank as in heavy AF but weak sauce for arms. Who cares if the center part is durable when you have to replace arms every few flights. What a headache!

[@NorgeSquad]

I really hope they will make this in Walksnail or analog in the future. This is what I've been looking for for years

[@雍正-v5s]

It can support walksnal moonlight, and the actual experience is not much different from DJI's O3

[@DANDO-DS]

So will this connect to my goggles3 and controller 3 since it has 03 air unit? Or will the AIO not connect?

[@NickBurnsFPV]

I don't have the v3 goggles or radio. my understanding is it should, but may require getting the PNP version.

[@Dripi_weta]

is your sound coming from the headset or from the drone recording... also, which headset is that, very nice display,

[@NickBurnsFPV]

From a secondary camera sitting on the table

[@Nodestradamus]

Will 3 inch props fit?

[@NickBurnsFPV]

Not designed for 3inch props. Even if they fit, then the motor is undersized.

[@awerks12]

Is Air75 review coming?

[@NickBurnsFPV]

It will be a bit yet. Probably arrive while I am out on vacation

[@yannickg6904]

Non-ducted 2.5" builds don't get enough love.

[@NickBurnsFPV]

Yes I think so as well

[@Boomshock96]

What other non-ducted bnf dji quads are there? Got the domain 3.6 and looking for something smaller. The thing is a heavy rocket with insane inertia. Darkstar20 is great but I need more power.

[@MrBumbles2]

well i guess i have to go digital soon. na analog is fine ,,

[@NickBurnsFPV]

Analog is still fun and good. No need to spend more on digital if we can still enjoy analog

[@bestfield372]

Are the props in Vue? I car,, t see it in goggles view

[@NickBurnsFPV]

The video show is as seen in the goggles.

[@jamiehill9578]

will the v2 goggles work on the 03 system

[@Boomshock96]

V2, goggles 2, goggles integra, and the new goggles 3 with the latest update will work with the o3.

[@jamiehill9578]

@@Boomshock96 so if I do the latest update then I can't use them with the older system

[@Boomshock96]

@@jamiehill9578 updating won’t remove any compatibility with older units.

[@mikequill9638]

Definitely not a fan of that usb dongle for the FC

[@ChrisHarmon1]

I like them for weight critical applications, but I don't think it's making any difference on a tank like this.

[@vanlifefpv6340]

@@ChrisHarmon1 Yeah, this model is junk. Arm snapped on a hard landing. Regret buying this.

[@cybelisk1526]

Do they sell the frame separately?

[@NickBurnsFPV]

Yes linked in the description

[@cybelisk1526]

@@NickBurnsFPV think it could take either a moonlight or HD zero freestyle vtx?

[@NickBurnsFPV]

@@cybelisk1526 yea, we would have to make some adjustments, but there is room for them

[@citronbull]

Oasis fly or the Oddity RC Xi20? I'm ready to move on from my Pavo20

[@NickBurnsFPV]

In choosing what are the most important factors? Performance, flight time, fly style preference, cost, reliability, safety??

[@citronbull]

Had it for a couple days and I love it. One thing though, those adapters are quad specific. I tried to use the Pavo20 adapter but it didn't work

[@leonardterlevic4765]

Wish there was an analog ver

[@FIGFPV]

Too heavy for a 2.5inch prop. This weighs exactly the same as my 03 aos 3.5 with nearly the exact same motor size and kv. 1404 3800kv.

[@jandomingo9806]

My 2fiddy 4inch 1804 2450kv is only 186g.

[@vanlifefpv6340]

@@jandomingo9806 It's a brick with weak sauce arms. Already broke two arms on this model.

[@pharmapsychotic]

you ever get out and guerilla whoop?

[@NickBurnsFPV]

Not really, maybe once or twice over the years.

[@itouchipods]

@@NickBurnsFPVi think this is actually a great idea for the channel

[@richardmcguigan1382]

Reminds me of the dolphin gep rc

[@WillyFPV]

Motor 4 is backwards Nick

[@NickBurnsFPV]

Huh? Nah

[@WillyFPV]

@@NickBurnsFPV Are you sure? Did you change motor#4 prop after a crash.? Sure looks like it to me. Anyway thanks for another great review.

[@Michelsen3K]

driblet 2 inch HD 4S for those who prefer walksnail avatar ;-) i own one but analog. 4S is so much fun on these tiny guys 🙂

[@Sub250official]

It can fit WS Moonlight

[@TopG-FPV]

Help please!! Hey Nic, I am about to drop $450 on something so what would be your call- ymz eagle 1 with dji “3. They say it flies like a 5” with a ton of power at 2.5”. Or the sub 250 2.5” in this video? The only thing that stinks with both companies is they charge $50 for shipping!!! Or you wait 40 days. Thanks for the help and please let us know what the best 2.5” beast is.

[@NickBurnsFPV]

Well, first the "flies like a 5inch", this is marketing mumbo jumbo, never believe it. Nothing flies like a 5inch put a quad with 5inch props. Between the two I 100% suggest the the oasisfly25. The eagle 1 has to much weigh and isn't going to perform nearly as well as the oasisfly25

[@TopG-FPV]

⁠. Thank you Nick!!!! You just saved me $450. The videos on the eagle 1 look really nice but wasn’t sure if that was just influencer crap. Thank you love love the channel and really appreciate the fast response to your fans!!

[@BadgerDogCat27]

Are you best friends with your neighbours? Because I have a feeling you fly quads outside a lot! And they are loud 😂😂

[@Wind_Rapport]

I don't think you're hearing much from inside your house. Besides when you have property it's your business what you do on said property, so if my neighbors were Karens about me flying in my yard I could care less personally. Long as you're practicing common manners (don't fly too early or late, same as w/ mowing the lawn in a neighborhood setting really) you shouldn't concern yourself with what others think about your enjoyment time.

[@arhdubb659]

Yea good luck 🍀 my nebors were being karens with another nebor and they sounded like you ill do whatever i want ! Guess what ,the karens in jail an im short 2 nebors now ,there in the ground . So think about what your doing be4 just being a hard head cuz karens dont play fair !

[@juno0314-o9o]

sir I don't know if you are aware but your video for pavo20 pro is gone

[@NickBurnsFPV]

Thanks for letting me know. Inadvertent mistake on my part

[@rgilroy1909]

possible "dji basher"? yes more testing and crashing please.

[@MCsCreations]

Wow! This quad is crazy fast, Nick! 😮 Fantastic flying and review!!! But I think the Moonlight should probably fit there as well... Anyway, stay safe there with your family! 🖖😊

[@NickBurnsFPV]

Indeed others would fit but dang the option to buy truly ready to fly is much preferred or that’s what I believe I am hearing

[@MCsCreations]

@@NickBurnsFPV Yeah... Unless you like to build. 😉

[@opticFPV]

Seems way too expensive for a 2.5 inch to me, $430 for just the quad???

[@itouchipods]

What a let down. I would have def considered one of these at 200..

[@madladdan]

Fly behind your neighbours house like you usually do

[@jandomingo9806]

Abit heavy for a 2.5inch.

[@vanlifefpv6340]

It's a brick

[@sosdeathvalley]

I hate when they use them type of Fc because u can lose the extra plug

[@NickBurnsFPV]

Yes the famous dongle. Them getting a replacement is troublesome

[@damianwyczakowski2491]

Hello!

[@phreshxmetal]

anntanna

[@markwilliams5654]

Sounds horrible too heavy

[@errantsorcerer]

I'm listening to this after watching breaking bad and you sound exactly like Hank if he was into drones and fpv, i love it

[@NickBurnsFPV]

I hear that and the guy from project farm on KZbin. Apparently I have a common voice of one sort or another 😁

[@16-BITFPV]

What a depressing, horrible show. Low budget day time trash TV do yourself a favor and go watch anything else.