WHOA!!! Such a minor change can make a HUGE difference.
@alfonsonation10 ай бұрын
Thanks for watching!
@MrGojira959 ай бұрын
@@alfonsonationJust found mine, and I went back to this tutorial immediately. Turns out mine came with both uncentered.
@Bumblebee4215 ай бұрын
Dang
@Bumblebee4215 ай бұрын
This should have more comments and likes
@Bumblebee4215 ай бұрын
I will like
@namelessfaceinthecrowd24596 ай бұрын
I thought mine was fine until I noticed the stiff joint moving backwards and that the hip wobbled alot like it may break off. Looked up your vid and fixed it. Seems fine now. Thank you you saved my bonecrusher !
@theoneandonlydomtoretto97410 ай бұрын
Thanks for the lifesaver, been scared to transform him since I saw the news but after seeing this there’s hope, thank you
@ei.driandm10 ай бұрын
You sir, deserve a medal for this video! I had the exact same problem with the SS Overload 3 years ago where the ratchet joint broke due to the high pressure of the articulation. Sadly, there was no solution. Even replacing the broken piece with a resin polymer was fruitless because the pressure of the screwed plate was so tight that broke any replacement piece that I put inside. However, what you did with your video is very useful not only for the MPM Bonecrusher, but also for all the others Transformers figures with tight ratchet joints. Thank you!
@GlowStickGreg9 ай бұрын
I’m getting this for Christmas and I’m really hyped looks great
@caseys_collectibles_10010 ай бұрын
I’m so glad that you posted a tutorial of how to fix him; like I said before I’m getting mine soon, so I’m immediately going to do this lol! ☃️❄️
@alfonsonation10 ай бұрын
Hope it helps! Thanks for watching!
@caseys_collectibles_10010 ай бұрын
@@alfonsonationIt definitely will! I don’t wanna bust mine up right after I get it out of the box, so this is seriously a life-saver of a video. Thanks Alfonso you’re the best! ❄️🩵
@AlexReynard2 ай бұрын
THANK YOU! Mine's still a little iffy afterwards, but the clicks feel a lot more firm and stable. You're a toysaver!
@d-actionproductions65010 ай бұрын
He just saved our lives and our money
@fearglitchdragon72372 ай бұрын
thank god this popped into my recommended the day before my copy is delievered
@JJPrimeReviews202010 ай бұрын
A double Bonecrusher upload from Alfonso? Let’s freaking goooooooo!!!!!
@Miragereviews10 ай бұрын
Doing God's work Alfonso
@degeimos9 ай бұрын
Just got my figure and this was the first thing I did, thank you very much!
@georgewaters25337 ай бұрын
Thanks for taking the time to make this instructional video!👍🏻
@jaredpower10195 ай бұрын
Looks like I’ll fixed bonecrusher so he can pose well thanks Alfonso
@wangeroogerque10 ай бұрын
On my copy they have a bit of play. I definitely open him up today and check the ratchets.
@muxaullo29 күн бұрын
was there a problem?
@wangeroogerque29 күн бұрын
@@muxaullo no, problem. It was just a little play in the ratchet.
@muxaullo29 күн бұрын
@@wangeroogerque i fixed and still have a quiet huge play in ratchets😔
@antoniomartin602610 ай бұрын
Thank you for this.. it seem simple to do and will do. Thank you again, it's much appreciated
@Rusty-vq6rv10 ай бұрын
Thanks Alphonso!! Your a good man!!
@JimmyEvans-l9g9 ай бұрын
Thank you for the helpful tip, Alfonso. I've ordered a bonecrusher, but it won't arrive til the 11th of this month.
@StathIsOptimus2 ай бұрын
Thank you for this tutorial. Can he hold his legs up now with this fix?
@NKStopMotions10 ай бұрын
2 videos in 25 minutes? LETS GOOO
@Justarandomreviwer10 ай бұрын
I’ve gotta get me one of these. Also Alfonso what was that prime you were posing with bonecrusher in the beginning of the video? I don’t recognize the figure but it looks really good.
@The_Barroth8 ай бұрын
Idk I did it and they still have a bit of looseness to them. Probably gotta realign them again (and add more Kiki’s)
@robertsands186810 ай бұрын
Not gonna lie ive never heard you be this quiet or seen you be this careful. ❤❤😊
@thegreatduca1004 ай бұрын
This might sound like a stupid question but what’s the size of the screw so I don’t accidentally dull out the screw while fixing my MPM Bonecrusher?
@tavinprice231010 ай бұрын
Can you do this fix while its still in vehicle mode?
@AngelGarcia-cq1lt10 ай бұрын
I love you video
@pat1r1ck5 ай бұрын
I got this, and mine is missing a singular claw.
@splatdeity37984 ай бұрын
I got mine, and the ratchet is broken. Is there any replacement or fix to this?
@calebdonaldson70449 ай бұрын
What screwdriver is it? None of mine fit.
@jonasekstrand10106 ай бұрын
[IF] i get this toy is this like a need-to-do thing?
@EthanGensler10 ай бұрын
Anyone know what primer I should use when repainting a studio series?
@Thingy-dl6jt10 ай бұрын
Does this apply to all bonecrushers?
@tavinprice231010 ай бұрын
Not all MPM bonecrushers have this issue I assume but I suggest you open yours up and check just encase
@alfonsonation10 ай бұрын
The issue is apparently widespread, but not every Bonecrusher may have tolerance issues. But this fix could be attempted on all copies. Same joints, same parts. Best of luck!
@reginaorial753710 ай бұрын
@@alfonsonationwhy in your country have so many complaints about those ratchet joint..? Here in Asia there are no complaints at all. All of our mpm are fine and perfect.
@thevoyagerv44999 ай бұрын
@@reginaorial7537 UK here. I'm not sure about any reports with Bonecrusher here, but mine does have a stiff ratchet joint so I'm going to open him up anyways. Also don't forget, Asia is where this mould was made, Takaratomy. Shipping will mess some things up
@reginaorial75379 ай бұрын
@@thevoyagerv4499 the issue is a scam.
@Skibidi_junker23510 ай бұрын
5th
@Karnage_gg10 ай бұрын
First I need this
@3rdlegend44510 ай бұрын
Dos!
@MUSICTRON-x4q10 ай бұрын
All who think Alfonso should be a part of black history 👇
@bw_kollectr10 ай бұрын
Good shit dude I was so scared of this issues but that’s so helpful thank you Alfonso !! 🤌🏽🤌🏽