Watch This Before You Organize Your Shop 2

[@cbigg81]

I love hearing about granddads tools and the things he taught you. One of mine lived a state away and died when I was eight, the other lived in town here and I learned so much, yet so little from him - he passed when I was in High school. I thought he would be around forever. Thanks Cody!

[@tomstradinger5958]

Both my grandfather's died, by time I was 5.

[@supersoldier64]

Hello Cody. I have a homestead that we run a cow share dairy from. I can identify with your frustration on a large homestead. When I am disorganized , it is exhausting running all over the property to acquire what is needed to finish a task. Your ideas are very helpful. Thank you.

[@IntoTheDirtshop]

Long time watcher of Wranglerstar here.. since the Off-grid project.. I finally got around to reading your book this week and have a new-found respect for every word that comes out of your mouth now Cody. I just watched this episode like a kid who is eager to learn and with due respect to all of your knowledge and expertise. Love you guys, keep it up. -Tim

[@wranglerstar]

Thank you Tim,

[@Matthew37128]

Something I noticed you could use in your shop that I have in mine, a retractable extension cord. I have 3 in my shop, one hanging from the ceiling in the middle of the floor plan, and 1 near the door ways where you have your air hose. I love them because I can run anywhere from 1' to 50' of cord and not have all the extra cord laying around on the floor causing a tripping hazard, and they are easy to roll back up by just pulling down a little bit and letting them retract into the housing. Lowes has them for round about 40-50 dollars.

[@wranglerstar]

Smart! mrsw

[@KillerNetDog]

I also have a 50' air hose on a retracting reel overhead just inside the main door to the shop. So handy for airing up tires and blowing out tractor radiators and such right outside the shop or basically within 50' of the door without making a mess in the shop and having to deal with the hose.. Just a tug and it reels right up completely out of the way..

[@tarz9386]

GOOD IDEA, I HAVE TWO IN MY SHOP THAT I GOT AT THE DEPOT.

[@scottw3723]

the only time I go back to a non retractable air hose is when it fails and I pull it apart haha, they are a great thing if you find a quality built one. I have 3 reels, one for air, one for 240v power extension lead(yes I'm one of those aussie blokes :D) and one for a water line for running pressure washers and washing things with out having to deal with hose everywhere. cheers.

[@KillerNetDog]

I found the best reel that I could find but it came with a cheap chinese hose on it that failed pretty quickly and I replaced it with good hose. Kinda the way it goes these days I guess.

[@dennisalanvids]

Was always a fan of snap on. Working in a junkyard I wasn't making much money but saw the value in buying the right stuff the first time. 20 years later I still have and use them. Really nice collection! Please shoot more videos like this. I need help building my homestead :) THanks

[@wayway11becb4998]

Love these type of videos they help us to realize the importance of prepping a shop to ones needs and gives great insight on how little space you really need to be efficient. Keep up the great work love your videos

[@johnhoover6804]

I am trying to organize my basement work area after using it for 25 years with everything a mess. Enjoyed hearing how you organize the shop. Interesting to hear the personal comments about the family. I think about my father, father in law and brother when I look at their tools I have. I picked up some helpful ideas for organizing my tools and work area.Thanks so much. John Hoover Leawood, Kansas

[@wranglerstar]

STOP SPILLING GAS! GET YOUR 12 VOLT ELECTRIC PUMP HERE: goo.gl/AFPNon

[@evanford688]

we are starting up a company and when we are looking through the garage. We have some axe heads. if you want we could do them up for you with a nice handle and a sharp and polished finish.

[@troyarthur5410]

After this video, I finally realized why I enjoy your channel... its your passion for sharing what others have shared with you! My background is in restaurants and music. I have a passion for learning and enjoy your content because of your approach! But perhaps even more than my own education, I enjoy learning from your experiences so that I may share even more information with others. Being a teacher, mentor or a coach are all professions that I admire. Mainly because they all require the sharing of information with those that have none. Please continue sharing your experiences and what you have gained in knowledge from your life! I promise you I will do the same! Regards...

[@johnj.baranski6553]

Cody. Keep going on this topic. Would like to see the rest of the big shop and the animal barn you modified and a candid look at the woodworkning shop before you clean up knowing we are coming in with you. maybe I won't feel so bad being messy.

[@jimharvey6670]

John J. Baranski - yes, ME too!

[@JerkRice]

Never can have too many organization videos. Many great ideas.

[@JADuppyMan]

HI - I'm a retired Air Force mechanic. I love to see how others set up their shop(s). You never stop learning. Great audio =)

[@jimharvey6670]

“Impact tools” - I LOVE my air/impact tools!!! I use them ALL the time (even being retired!). Please discuss them more!

[@2506Larry]

You are extremely blessed with tools and space.

[@justsomeawesomeperson6396]

I gotta be honest, your vids are kinda calming. It's nice to watch, even even through i have no need to watch something about organizing...

[@randystrand908]

Inspirational. Thank you! Been a tool guy & DIY all my life, but organizing the years of accumulated tools has been a weak link. Hoping this video (as used by Father) will motivate me!

[@PappyJenkins1]

Always enjoy your organizing videos Cody. They're a good reminder for me to tidy up my garage.

[@dr.figvideos3303]

I'm liking these shop tour videos. I'd like to see the entire shop (even storage area) and a review of the air system.

[@matthewnebel1072]

Same

[@jimharvey6670]

Ditto!

[@m.ferreira470]

I have a new garage and love your shop and tool video. I always pick up on a few things.

[@Rambizzle454]

love the shop, wish I had a nice barn like that

[@boudreaumay3040]

Oh yes always like this type of video Cody the more the better. Placement of tools always rings a bell with anybody, Thank you Cody !

[@maehay4065]

I appreciate your organization technique very much Cody👍 MY FAVORITE CHANNEL BECAUSE OF YOUR FAMILY VALUES AND FAITH HAVE ENCOURAGED ME VERY WELL! GOD BLESS YOU AND YOUR FAMILY TODAY MR. & Mrs. WRANGLERSTAR ⭐️👍☝️👏🏡😍

[@wranglerstar]

Thank you Mae

[@stevewalker7822]

I enjoy being organized and welcome your input.

[@miguelthunder167]

Part 3 please

[@CameronLienhart]

Important to note: shops this well equipped (duplicates of multiple tools) can literally take years for the common man to develop. And that's ok!

[@DracoOmnia]

Years and years and years. If you think about it a lot of Wranglerstars inventory is inherited, "granpops old..." it's beyond decades of tool acquisition, it's generations at that point and some of us just don't have that legacy to receive from our progenitors.

[@merlinbasics9345]

People may not have the duplicates nor the space. I suggest making checklists of the things you need starting with the more common tasks for you, so that you can go in order/sequence and pick and place things in the tool box, that way you will not forget things!

[@SandCrabNews]

Tools are a wise investment of youth. I started with bicycle tools, then put those in my car. I always had tools in the home. When I retired from the Navy and went into manufacturing, I used what I had and budgeted $25 per pay check for tool shopping. My third employer announced that in order to compete they were going metric and assemblers like me had to buy metric tools, so I bought a big roll-around tool box. They later had a slow down, I got laid off and had to store my roll-around, and buy tools to keep in my car. I wish I had a garage and a shop. Oh well end rant.

[@SteveBrecht]

I will add this thought as well. I was in a situation where nothing came down to me from a father, etc. so I have built from scratch. As Cody has mentioned often, yard sales are such a great resource. Probably half of my tools are from yard sale finds at really cheap prices. This can really help building your collection quicker rather than buying it all new.

[@johnj.baranski6553]

I started at 16 for Christmas asking for craftsman tools. I'm 45. it takes a while to get where you have a well equipped shop with good quality tools. I'm about there now.

[@Georgiadawgs_]

Yes please continue with the shop tour

[@Q5000]

I really like how apparently you painted your peg board with chalkboard paint and can have it flexible in labeling that way. You could also outline your tools but change it later if need be. Brilliant!

[@tagman1325]

One thing I did see not really a tool, but the mat to stand on by your vise. Man those are wonderful in places that you stand for long periods of time.

[@michaeleasley1368]

The timing for this video couldn't be better. I just finished building my shop and I'm in the process of moving in/ laying things out.

[@Natedoc808]

Thank you for taking the time to make your videos and help many people who didn’t have a grandpa and dad that made them hold the flashlight the entirety of their childhood! I can attest to the tool cart handiness; toolbox is great for large, specialty, not often used tools particularly handy in a designated mechanics area like in the lift bay in our shop

[@ontg99]

Hahah. "Angle of the dangle."

[@jaredking9116]

Keep going! Keep going around the shop and show what you keep in the yellow rolling box too!

[@bill-spec]

Oh, and snap-on still makes a wonderful box I love mine use it all day everyday.

[@MrCelticatheart]

I'm a huge proponent of organization, great job Cody!

[@SteveBrecht]

Watching the metric and imperial sets of wrenches and waiting for the Metric dig.... "...Imperial side, the superior side..." Yep, there it is! Always good for a smile. Keep up the great videos, Cody. Dedicated Canuck watcher here.

[@mattfranks5501]

Wranglerstar really like these videos I learn new things I can do to my shop love hearing from the experience you have so I can adopt them as my own

[@andrewmiller5084]

Its funny that you made these videos this week. Wednesday night after work i started to clean up my shop and reorganize all my tools. I went it my shop to find a tool and spent 20 minuets trying to find it and said enough is enough i have to clean up this shop so i can find things when i need them.

[@RBMawby]

Good for making time to think things through at home- plus some good ideas. Thanks.

[@opfor325]

a lot of thought went into setting up your shop and it shows.

[@roybracy5074]

some good ideas I must try to get my tools sorted as you said you can spend more time looking for a tool than the job

[@davidmeeker1611]

I really enjoy these type videos! I try to take some of these ideas to the shop that I work at to make life easier.

[@jimharvey6670]

Thank you so much for acknowledging that we have different needs in our shops than YOU do! For example, I live in Florida, diagonally across the continental United States from you! THAT, plus the difference in our ages, our interests, and (probably, many other factors) hold my attention when perhaps others have “moved on”!

[@jonathanholzgartner4057]

I am an L1 ASE Master tech. The 3/8 impact is my favorite tool. And snap on rebuilds them for $100 dollars flat rate after the 2 year warranty. Also they make 1/4 body 3/8 drive air ratchet that is more usefull because its way smaller.

[@Rogers1911]

Yes please do more videos like this.

[@jerrybobteasdale]

If you have a big shop, consider putting a ceiling over the main workbench area. It'll give you a place to mount brighter lighting. It'll give you a loft to store seldom-used stuff( and the big air compressor). And you might want to pull a curtain or temporary wall divider around it to heat it, or shield it from dust.

[@rushpond808]

I just built a new garage in my back yard and am looking for ideas on how to arrange things. thanks for your ideas.

[@zoolanderfred]

I love these type of videos. I'm a little o.c.d. and am very organized in my shop. I totally noticed when you didn't put your socket back in its place on the cart. ha ha. Like the staging table also.

[@larrywebb8309]

I got a idea to add to your setup ,, a retractable electric cord located by the overhead door and a tower shelf with power drill , jigsaw , saw zaw , sander , corded impact gun . then during fabrication you can go outside quickly and it keeps the mess and dirt and dust outside. Excellent video I learned alot.

[@ianfarquharson3772]

Your Polly upgrade works great. So much lighter. TkEZ»UK.xx

[@thomascronin1040]

Cody...you're the best! Great video. Yup, I cringe when I sometimes walk by my barn when it's all locked up and hear the air compressor start...UHGG I had forgotten to unplug it after the last use.

[@paulgargan6134]

I agree organization saves time

[@GreekPreparedness]

Cody, I suggest you have a look at the farmers' crates. I do not hwo they look in the US, but over here, they are kinda large, taking 50lbs of produce. So they are big enough that loggers use them for their kit. there is room for a medium chainsaw and all the gear. (obviously one needs to open a hole for the chainsaw bar, but they are not structurally weakened)

[@dieselrulesKO]

its super easy to do this when you have more shop space than you need, try doing it the other way round and youll soon find yourself with a more worthwhile video, in a crowded one all the stuff you mentioned in your videos would fit in just your first corner and one workbench with a vice.

[@FsCThePr0]

These two videos are the ones I have been waiting too see for tree years now, thank you!:)

[@gscottbB]

I've been watching for some time and just felt compelled to mention; there are very few people i can stand to hear repeat themselves & you are one of them. I think I could go to your house or shop and if asked, could go get just about any tool you asked for. I've always been a strong fan of organization but didn't realize it could be nice to watch or listen to. Keep on influencing the world CW.

[@mandbhomestead]

Thanks for all the tips. I am going to utilize most of these tips. Good luck with the repairs of the shop and I am looking forward to the updates on that. Thanks again.

[@EIPStudiosOhio]

......"as I age"..... how true.... I'm in my 40's now, and I am trending towards this thinking myself, and it is slowly starting to bear fruit. Good word, sir.

[@pro8cess]

Great pointers for organizing the shop. Thanks

[@Kris_at_WhiteOaksFarm]

I just inherited my Father in Law's, garage full of tools. My little shop is so full, I can hardly move in it. It'll take me a while to sort and sell the ones I don't need, but oh the memories as I do...

[@AllaroundNbackagain]

Kris Gasteiger that was very nice of him to leave those to you. I'm sure he had found memories with some of those tools.

[@Kris_at_WhiteOaksFarm]

Can I say it? Yes, I miss my Father and Mother in law. They accepted me into their family as a son. The memories are sharp and fresh. Thankfully, I still have the presence, and love of their beautiful daughter. Don't tell her I posted this, she'd be embarrassed, and probably punch me in the arm or some junk!

[@ryanvear]

Really enjoying this series!

[@matt_selby]

I like this style of video. The pacing is also great. Doesnt feel like your rushing through any of it, nor does it seem like you are taking to long.

[@regmd90]

I definitely enjoy these videos.

[@danieljonasson7589]

Another very interesting video, thank you! Something I would like to hear you talk about is how to properly deal with fuel for your lawn mover, weed whacker, chain saw, whatever, from the perspective of a "normal" guy that maybe uses them much less frequently than you do on your huge property. I feel that I'm reducing the life span on many things, simply because I don't know enough about what's required to keep them in good shape. For example: do I need to drain the fuel from my lawn mover before/after winter when it won't be used for several months? How often do you change oil? Of course you can find the answer to questions like this through manuals etc. but I think it would be really helpful to hear the point of view of an expert! Anyway, thank you for all your effort creating all these videos for us (lately they've even gotten better in my opinion)!

[@RJbell5]

A great idea I was taught was to put outlets all over your shop above your head by workbenches along the wall and middle of the shop hanging down. A little bit of chain and you can add or subtract lights for working as you need them around the shop.

[@aaronsmith3456]

The snap on truck in my area uses the female air quick couplers welded to a strip to hang the air tools.. works very well. Might work on that cart

[@ScotsFurian]

Cody , your a lucky man , wife, kid, land and plenty of tools and equipment. Im a little jealous of the large shop and dedicated wood shop too but know the work you put into it all ! What id like your opinion on is how to organise a smaller shop ! Yours is what 40 x 60 was it ? Mine is more like 10 x 20 ish. Its basically a car garrage that widens at the back. I always seem to need more space. Shelves or cupboards ? Ideas to maximise space in a small shop would be great ! In my climate i need my tools protected in cupboard though or they rust as the air is not dry.

[@bobbyw9046]

Get the Snap-on WOBBLE + which not only wobbles, but the second push makes it solid. They are sometimes on sale.

[@dusttinfinn6583]

Great video. Full of great ideas and tips that I didn’t think about. I just finished building and I have an overall idea of how i want it to be organized but was struggling w/ details. Whether you’re just starting or have years of accumulating tools over multiple crafts I think these videos are helpful.

[@dusttinfinn6583]

To add to my last comment, having tool carts are a must. One thing to add. If you’re investing in a shop compressor invest in a couple retractable hose reels and extension cords. Quick, easy access.. there when you need it, out of the way when you don’t. off the ground keeping them from getting damaged or pinched. I have mine set up on opposite sides so that I don’t have to stretch hose/cords across vehicles/equipment. no more tripping over them or maneuvering tool carts around them

[@rickmaudlin2160]

IDEA: Make 6" riser-shelves " for your top tool boxes so you have a work/storage space just below the top toolbox. You will not need to move things out of the way to open the drawers. Like where your gloves were in front of the Kennedy mechanic's box... Raise it up 6 inches and now you have a place for those gloves or to just to set down the tools or parts you are actively using.

[@justsmart1843]

I find that 5s/ labeling spaces goes a long way towards ensuring things get home. Enjoyed this video. Nicely done,

[@PastorHinChrist]

Please do many more of these types of videos- love the tool and shed stuff.

[@Eric-ns8hm]

This gave me a lot of good ldeas thank you keep doing what you are doing god bless

[@mh-oh8kf]

Love these shop videos! Please do more, I work in a shop myself and always enjoy these tips.

[@steve3342]

I really enjoy the shop video's , I started watching when you were rebuilding the wood shop and was very interested in that. I am in the progress of organizing and building up my garage shop and I am always looking for good ideas on how to do things. Thanks for sharing your ideas

[@deedubz9659]

Loved the video. You have a Serious shop there and some great tools. Only thing im different on is Ive went to all cordless tools for impacts. Great organization. Ive been working on getting my shop ‘ organized’ after 5 years and many tries. Good advice.

[@dwightl5863]

I like the organization aspect. My problem is keeping it that way. I find it a MUST to put stuff back into place when I get done with that project. Otherwise it just keeps piling up. Any other suggestions would be appreciated.

[@jamespollock2500]

A GOOD compressor is a must. Does yours still have the thumb screw drain on it? Might want to replace it with a ball valve, makes it easier to drain condensation out of the tank. You can even extend it to the side for better access.

[@jimharvey6670]

“Air Station” - GREAT idea! I have a 50’ retractable hose at mine! Very handy!

[@tcr03]

I love seeing how other ppl organize their tools

[@glennanderson8783]

Love these types of videos. Wish you would show your air compressor setup, plumbing, and water removal setup.

[@jimharvey6670]

glenn anderson - me too on THIS one too!

[@Wrenchesandrods]

Great video as always! I wish It was cool enough here in Missouri today to wear a flannel shirt! Have a blessed day Cody!

[@Jp_1984]

i recently got the DeWalt 1/2in 20volt impact. that thing is awesome

[@DiyRye978]

Good stuff. I do a lot of similar things in a smaller shop. Envious of the large shop!

[@aveoxus1139]

Re-organizing my garage shop, this is a nice boost of inspiration sir, especially that chainsaw section

[@handbanana6205]

1:13 my general life philosophy at this point. 15:30 I like the air station! You've also worked your way into the standard sized 2 car garage, by time you put some stuff in it!

[@mtnman8169]

Hey Cody, nice job. You should check out the book "The Lean Farm" by Ben Hartman. He really gets into setting up your workflows and keeping in mind that others, like Brian, will be working on the homestead.

[@kurtispalmer536]

I really like these videos ! I know its outdoor season and i do enjoy the big projects, i miss the wood shop build. Gives me something to look forward to in the winter I guess !

[@russellbelliveau1694]

Thanks for the 2 part video, I’m trying to organize my shop and be more efficient, I really enjoyed this thanks

[@thebad300]

i would recommend the long 3/8 flex head ratchet i use to hate them but now its my go to

[@den098]

Love your videos man! Try and in-line blow gun at the end of your hose. I have a cabinet shop and all our fittings have them. I'd suggest a shut off valve there just in case your line does blow... Thanks again for sharing your knowledge and experience.

[@nfp212]

Great pro-tips. Thanks, Wranglerstar!

[@nicksteeves7655]

Love this style video, would love to see a whole shop organization video

[@Robbmyster]

Mr. Cody, I noticed you said you use ethanol free gas in all your engines, while I agree with you and use it in all of my small engines, do you think it's beneficial to use ethanol free in your truck as well? Thanks.

[@DracoOmnia]

I'm terrible about being organized, I would like to see more videos in regards to this in the hopes that maybe some of it finds it's way into my life. Granted, it would help if I could actually settle into one location for more than a year..

[@dutchcourage7312]

Hmmm moving a lot is actually a great way to get and stay organized, you just need to find the right storage options that will let you keep your stuff together 'thematically' and would move as one unit when you do. I am sure that if you go through your tools and index what you have and organize it logically for yourself. You can then go to a DIY or tool store to find one or two smaller trollies that can be easily lifted by two people, and would hold your tool by theme (say one for power tools, one for hand tools). Also visit the 'dollar store' (or equivalent) as they tend to have these plastic boxes that seal well and have all these sections in them, those are great for say nails and screws. Or other types of odd and ends that benefit from having their separate section, but would also like to stick together (i have all my Dremel bobs and bits, odds and ends in one of them, works marvelous) Heck, and if you move that often, i would probably have a bucket or a smaller lightweight tool thing, with specific 'moving tools', a putty knife with putty, phillips and regular screw driver, ductape, a hammer with nail puller, stanley knife. (basically see what you use the next time you move, and keep that separate (or buy it double). That way you can keep your moving stuff separate when you move all your actual tools, and access them without having your tools already out and about. As one of the annoying things of moving is already having packed something you need, or not yet unpacked it. I have also seen people using wooded boxes to move their books, and use the boxes on their sides stacked to make a bookcase. There are also these cloth (with metal frame) clothing racks or 'closets' with wheels and all to keep clothing mobile and easy to move. So yeah, next time you are about to move, maybe organize your stuff well in advance, then take the time to shop around for sensible storage options to keep these things in, which are also easy to move. Instead of going for the card board box solution...

[@BAAMRanch]

Those sky lights are looking good

[@scottw3723]

These types of videos I would imagine would reach out to every single one of your followers, its a bit like a set of your favourite TV show, its good to get a camera on the parts of the set you always wondered about but was never shown. keep up the good work, your making a real difference in peoples lives(well that's my opinion anyway) since watching videos I have gone through all of my grandfathers old tools and restoring some of them and showing my sons how to use them. cheers.

[@Weelav]

Yes Cody love it, more of these types of videos please

[@MrConradF]

Hey Cody, can you talk about your storage solutions? We are in the process of building a shop, and I'm trying to decide if pallet racking would be worth getting. Thanks for the great videos!

[@VeeDubJohn]

Love to see how other's organize, thanks.

[@SG-jo9mk]

Love the organization videos. I am constantly moving and improving my shop as well!