Love the music and no fancy-frills approach. Keep it up Malex!
@lollojanne17664 жыл бұрын
Your information about ADV 150 is just great and highy appreciated! Keep it up!
@landellgaliza3 жыл бұрын
I have a 13.8 degree angle Pulley/driveface set. What rollers do you recommend for top end speed?
@michaelashley20554 жыл бұрын
Fuuuuuck. This is the best fuckin video of all time. Simple, full of information. No bullshits included. Fuck yeah! Youre the best bro!!!! Subscribed!!!!
@VidzMoto3 жыл бұрын
Bro, what is your CVT kits? what springs are you using both clutch and center spring, and flyball?
@BIMSATA3 жыл бұрын
Kampas ganda dan rumah mangkok nya dong bikinin referensi tentang part aftermarketnya apa akan menambah peforma signifikan ???
@johnengland86192 жыл бұрын
Thanks for the content
@LuckyImposter4 жыл бұрын
hi did you use adv150 spring stock? or yung change it????
@mlxnrzhr4 жыл бұрын
Im using stock spring... im currently looking at making my own spring base on my own dimension to get the spring rate i want..
@top1mvp3 жыл бұрын
you should try NCY brand center spring & clutch springs, even rollers
@wednesdaytan225 Жыл бұрын
Dr Pulley rollers has better material than NCY, it will last longer too because of it.
@mikeal-assaddungon24462 жыл бұрын
I heard about PPK pulley for adv. Have you ever tried it?
@mikeal-assaddungon24462 жыл бұрын
Made in what country should the stock spring be if the thailand is not that good?
@eazycycle4 жыл бұрын
sir have you heard of tfc brand pulley and clutch plate from taiwan?they said it does a lot of change in torque and speed.Kinda expensive though.Hope you can make a review on this,Thanks more power.
@mlxnrzhr4 жыл бұрын
Will look into when i have time..
@stevenJEDI3 Жыл бұрын
So which is the best spring to use?
@nazraennadziran25832 жыл бұрын
If use roller 14g...other part standard rekemen or not??weight rider 110kg...
@mohamedhadi77794 жыл бұрын
The problem with soft spring is that, it will make the v-belt slip....
@ajc56014 жыл бұрын
Was about to buy this spring because im looking for stiffer contra for my Honda Vario 150. They market it here(Philippines) as a way to lessen vibration on take off and improve performance. I think ill just look somewhere else.
@mlxnrzhr4 жыл бұрын
The spring reduce performance... in indo, they market it the same way.. reduce vibration and improve performance.. the vibration is actually caused by the front pulley.. not sure why everyone blame the clutch and spring..
@ajc56014 жыл бұрын
@@mlxnrzhr can you do a video on how to tune cvt using stock pulley? Im quite interested in your videos 😁 they are technical the way i wanted 😊
@mlxnrzhr4 жыл бұрын
Im still trying to find time to do the cvt tuning guide.. currently im quite busy with my other projects...
@renevictorgalanga36954 жыл бұрын
Is PCX contra stiffer than the conta of vario150? Does the contra of pcx fits to vario?
@mlxnrzhr4 жыл бұрын
@@renevictorgalanga3695 seems like pcx adv and vario spring are about the same diameter.. stiffer? That im not sure.. i dont have a vario spring with me..
@venhavurable3 жыл бұрын
Tanya donk, motor adv saya saya ganti per cvt 1500rpm per kampas ganda beat, dan roller 10gr kenapa suaranya jadi kaya ngeden ya?
@mlxnrzhr4 жыл бұрын
Updates.. please stay away from this kit from the time being.. theres a problem with the front pulley... the old batch of 13.8 design is still useable.. the new batch comes with 13.5 angle with bad height.. no top speed.. i will do another video update on the kit problem..
@hanyingyuan73184 жыл бұрын
How to check the version ?
@mlxnrzhr4 жыл бұрын
@@hanyingyuan7318 in the torque app under obd status..
@AnikiMotoPH4 жыл бұрын
hi.. where did you get the graph? is it included in the OBD2 scanner?
@mlxnrzhr4 жыл бұрын
I use the obd2 scanner to datalogged using the torque app then export it to csv file.. and finally using excel to plot the graph.. or you could directly use the torque app to display the graph..
@franzkennethingente49263 жыл бұрын
so its better if we use the stock adv 150 CVT?
@mlxnrzhr3 жыл бұрын
Stock cvt totally underpowered for me.. but it last the longest compared to aftermarket
@franzkennethingente49263 жыл бұрын
@@mlxnrzhr thanks!
@ferminbollozos68584 жыл бұрын
hello malex. just ordered this kit and i dont know much about cvt upgrades. so if i install this kit to my adv but use the stock spring, what's the end result? do i get quicker acceleration? top speed?
@mlxnrzhr4 жыл бұрын
If you got this kit, top speed will be the same.. stock spring will give you better acceleration.. i suggest you get other front pulley if you want top speed.. this kit is pretty much useless other than the clutch bowl...
@mlxnrzhr4 жыл бұрын
If you just want more pick up without any top speed increase, you can use the front pulley in the kit..
@ferminbollozos68584 жыл бұрын
thanks so much malex. im glad to have seen your video. what if i want to have more pick up and a little more topspeed? what would you recommend?
@mlxnrzhr4 жыл бұрын
I customised my own pulley to get both.. you can check my other video kzbin.info/www/bejne/moq9Y6d8nZaKaKc
@hanyingyuan73184 жыл бұрын
I just brought the whole set haha sry to trouble you but is anything useable ? Or only throw away the Thai spring ?
@mlxnrzhr4 жыл бұрын
The kit can be use.. Just use back the stock big spring..
@hanyingyuan73184 жыл бұрын
@@mlxnrzhr thanks
@Dytoshare3 жыл бұрын
I just bought this kit with 13,8 degree pulley and 18 gram roller. Acceleration is not good. But mid to high is better than stock. Any solution? Or i must change thai pcx spring to stock spring?
@mlxnrzhr3 жыл бұрын
18gram is way too heavy for 13.8 pulley.. thai pcx spring is a SCAM.. use back the stock spring.. i really wonder who started this thai pcx spring SCAM and the bearing seater SCAM...
@sandymarufinanto99483 жыл бұрын
@@mlxnrzhr Okay... I will change the spring. Thx for your info. I will update the result here. How recomendation roller weight for 13,8 pulley?
@fahriahmad68763 жыл бұрын
What code part adv spring?
@mikexoticsyt53363 жыл бұрын
have you tried stock spring with bearing seater?
@mlxnrzhr3 жыл бұрын
Yes, terrible..
@mikexoticsyt53363 жыл бұрын
@@mlxnrzhr ok thanks for the response.
@mikexoticsyt53363 жыл бұрын
Follow up question my friend. is 13.8 better than 13.5 degree in terms of accelaration and top speed? just a suggestion do a video on 13.5 vs 13.8 degree angle pulley sets 😁
@mlxnrzhr3 жыл бұрын
13.5 better acceleration but no top speed. There are 13.8 in the market with better acceleration with no top speed as well.. it all depends on the one that created the variator..
@mlxnrzhr3 жыл бұрын
Sadly ive thrown away all the pulley since i already have the best one..
@cussonbaby46464 жыл бұрын
So 12g + stock spring is the best ? Or 12g + ktc 1500rpm spring ?
@mlxnrzhr4 жыл бұрын
Theres no difference between the stock and ktc spring.. the ktc spring is slightly softer.. just use the stock spring..
@cussonbaby46464 жыл бұрын
@@mlxnrzhr ok thanks.
@kuyatroytv61504 жыл бұрын
Hi sir I want to ask that indonesia cvt can fit in Philippines Honda pcx cvt?
@mlxnrzhr4 жыл бұрын
Which year is the pcx?
@kuyatroytv61504 жыл бұрын
2018 model.
@mlxnrzhr4 жыл бұрын
Should be the same for cvt..
@jawlock31344 жыл бұрын
PCX spring +12g or stock spring + 12g?
@mlxnrzhr4 жыл бұрын
Stock spring
@jawlock31344 жыл бұрын
@@mlxnrzhr Thank you sir..more power!
@LuckyImposter4 жыл бұрын
good day nice video what is your recommendation to upgrade the power of adv150???
@mlxnrzhr4 жыл бұрын
I would start by changing front pulley and roller first.. currently theres too many different kind of front pulley.. most of them will give you pick up.. very little pulley will give you pick up and top speed as well..
@LuckyImposter4 жыл бұрын
malex sky hi im new in motor and adv is my first motor can you give my specific brand of pulley and rollers so i can search in the internet to buy
@mlxnrzhr4 жыл бұрын
Its hard to recommend any pulley at the moment.. the people who sold me the recommended pulley change the pulley dimension..
@mlxnrzhr4 жыл бұрын
I need to find time to put together a new video on what to look for when buying the front pulley..
@NayaA-Ri3 жыл бұрын
Wow.. so stock spring is better
@Ilovepelepenz4 жыл бұрын
Sorry im not professional, why people shouldnt buy it. Is it because it doesnt help anything at all? Or is it not safe?
@mlxnrzhr4 жыл бұрын
The torque/contra big spring that came with the kit reduce your bike performance.. instead of going faster youre actually going slower.. i dont recommend using the 3 clutch spring that came with the kit also well.. its too soft.. the rest of the kit is fine and safe to use..
@codym80794 жыл бұрын
Good video
@sneakyjepoy4 жыл бұрын
hello sir, what is your current cvt setup for your Honda Adv? very unformative videos. thank you!
@bimamahendra2824 жыл бұрын
How about your top speed??
@mlxnrzhr4 жыл бұрын
This cvt kit doesnt increase top speed.. you need another cvt kit..
@bimamahendra2824 жыл бұрын
@@mlxnrzhr i know, i just wanna know about your top speed
@mlxnrzhr4 жыл бұрын
My current top speed is 130 with my own kit..
@bimamahendra2824 жыл бұрын
With change of gear ratio??
@fartvonmag-abo85123 жыл бұрын
@@mlxnrzhr mines only 108 with my adv, my total odo is only at 1.5k, i wonder whats the problem with mine it cannot reach the top speed at 130