Watch This PBY Catalina RC Plane Soar Through the Sky and Over Water!

[@ktakis76]

Well done julius..you never give up..final part the best part.

[@trondaustad8617]

Amacing to see how you work thru all this job, and finaly takeoff from the lake. Love it mr 😊

[@gtsstang]

great work, fantastic how you fixed the issues until it flew like a charm

[@larryegilman1]

Great to see all of your creativity and skill end with an absolutely beautiful last flight and landing.

[@umontakahashi9528]

Gorgeous hidroplane! After all the adjustments that you did and experiments now it became a great flyer, and looks very beautiful in the sky. Congratulations!........again jeje. The best builder in the world.

[@JuliusPerdana]

Many thanks!

[@lawrencecoleman1670]

Incredible build start to finish, so satisfying watching it fly and land!

[@freezatron]

Hi Julius, I am so glad you proved me wrong regarding my comments about the strength of the wings, I've learned something good !! :) You've built a great model, hats off to you sir and congratulations :)

[@larkop6504]

It's good that you show that your builds don't always work first time but that you persist and find solutions. That lake is just around the corner from my home, be nice to talk to you to get your advice on sourcing materials. Looking forward to more of your videos

[@JuliusPerdana]

really, that's cool, maybe next week I will go to that lake again, making video of my RC Uboat

[@larkop6504]

@@JuliusPerdana Cool, must have a look at your build. Your English is very good, sadly my bahasa is terrible. Sure let me know next time your in the area and I can bring the drone down and get some aerial video for your KZbin if you want

[@JuliusPerdana]

@@larkop6504 thank you, I plan to use my drone too, but really appreciate if you come too :)

[@larkop6504]

@@JuliusPerdana Hi Julius, no problem at all just let me know before hand and I will call down. You might have better luck with your ducted fan if you form the intake duct differently or add augmentation doors/flaps.

[@spaced-mouse]

Yess!!! Water test!! Great video Julius!

[@georgecain22]

Very good sir it was very satisfying to see that smooth landing and takeoff from the water

[@JuliusPerdana]

Glad you enjoyed it

[@Jay-zc7iq]

Again fantastic build nothing better than creating with your own hands , now mr paderna get that A10 skywards 😊

[@barqwoof]

Beautiful results Julius. For my own float and seaplanes, I have found in helpful to install small water rudders to stabilize the plane until there is enough speed for the air rudder to be effective. Thank you for sharing. Jim

[@JuliusPerdana]

That's a great idea!

[@jerrybailey5797]

That was great to watch , fantastic model of a Catalina 👍

[@JuliusPerdana]

Glad you enjoyed it

[@luisgglz74]

Awesome!! Looks like you are finally enjoying to fly this beauty!!

[@mauricioalbertobrenesnunez7837]

EXCELLENT FLY JULIUS.

[@ΓεωργιοςΜαρσελος]

NICE FLY MY FRIEND JULIUS! NOW YOU ARE HAPPY!! YOU DID IT!!!!

[@JuliusPerdana]

Yes I am!

[@joemoore4027]

Looks great on the water !

[@imacenaveen]

Big Fan of yours... nice landing at the last

[@kosmokatinperson8835]

Amazing build, beautiful airplane! And that last landing!!…🎯 Great video!

[@JuliusPerdana]

Yes, thanks

[@antonanton7834]

wow buen video. Gracias por subir los planos del otro avion.

[@SkidmoreGmbH]

Love the Catalina!!! Going to build one some day..😊

[@JuliusPerdana]

You should!

[@cartsmodelle]

Great Model and smooth landing. I think it's not easy to land on water because it has quite a lot of drag. 👍

[@tomheetderks9997]

Beautiful!! I hope it stays water proof for you, and you get many more flights -;) It had to be one of your more time consuming builds If I had to guess.

[@supaoranges1086]

Very nice! I suggest flaps for landing if you have the space for them

[@JuliusPerdana]

But the real Catalina has no flaps too

[@biko9824]

@@JuliusPerdana Didn’t know that, but it’s a big and floaty airplane. Rc planes are often just less floaty, so that makes for harder landings. You made it work great though!

[@azzir325]

Excellent job on all fronts!

[@mwalker9117]

Excellent work man, and a beautiful landing at the end there.

[@JuliusPerdana]

Thanks a lot!

[@mirzawaseem2006]

Good work julius... God has gifted you with remarkable talents. I feel there is something wrong somewhere that this particular plane has been troublesome in flyung. But no issues. The model is excellent anyways.

[@walk4718]

Beautiful build; amazing use of resources 👍

[@cesarinocente1703]

Amazing flight!

[@JuliusPerdana]

Thanks a lot!

[@Orchidslover]

Very very nice Julius. Not a model for beginners but you have shown us that it is possible to fly it very well. Congratulations . And ... what about your Icon A5 ?

[@Wolverine1228d]

I've been looking forward to this video. Such a beautiful plane, and a beautiful build. Would've been a shame if you had built a sea plane and it never saw water..

[@hornplayer1228]

Add a small water rudder to keep straight & steady on take-off. We find full up-elevator and full throttle is best technique for foamy float planes to get them off the water quickly before they go wild.

[@robertmorey4104]

Beautiful! It came out great!

[@JuliusPerdana]

Thank you! 😊

[@RCaeroDepron]

Great video as usual I'm a fan I just finished a Spitfire in depron (see on my channel) but I would like to try this super nice model Thank you for all these shares

[@AG12990]

Amazing landing at the end 👍

[@AEROERGO]

Finally you can sit and enjoy it... was a tricky plane to fly in the end. How dry was inside after all day of tests?

[@JuliusPerdana]

there's water inside, but not much, I have to drain it (turn it upside down) every time

[@AEROERGO]

@@JuliusPerdana I see, how did the electronics take it? i used a condom to isolate some electronics...

[@masibabatosim9463]

Very nice!!! thanks for the video.

[@JuliusPerdana]

Thanks for watching!

[@aldocosta1220]

Voou muito bem, apesar de alguns susto, você não desistiu. Meus parabéns

[@JuliusPerdana]

Thank you so much

[@iforce2d]

Nice work!!

[@JuliusPerdana]

Thank you! Cheers!

[@sylvainponchelet4188]

a long long way for this result but IT'S FLY congratulation !!!!!

[@JuliusPerdana]

Thanks a lot!

[@russellhamer8690]

I could see That Boat in A KIT from You doing well if sold thru your chanel...Pby is a big Girl..very gracious in the air..

[@RobsonSilva-Nigrafox]

Great! Congratulations! 👏👏👏👏👏👏👏👏👏

[@17drp-exclusaoaguaslindas18]

Big Fan of yours... make another cartoon style plane! big j3! please!!! kkk

[@azisuabdul]

Keren. Ko lebih enak di danau ya om terbang nya. Dari pada di tempat yg kemarin

[@ВасяПупкин-и8э7ч]

Beutifule build 👍👍👍👍

[@williamlane2126]

Welcome to fantasy island!

[@marcellomg.giovannini4119]

Complimenti !!!!

[@spikemcnock8310]

Lovely.

[@aerorocha9751]

Top demais qual a envergadura e qual motor tá usando

[@hirnlegorush]

well done mate xD

[@kristjankralj3107]

nice

[@JuliusPerdana]

Thanks

[@ClipperProductions-he4xh]

What will be your next project? Will it be the U-boat?

[@JuliusPerdana]

yes

[@ryleebrownfox]

what is the brand of your laser cutter? thanks

[@JuliusPerdana]

I don't know it's not mine, but I believe it's China made

[@tusharkashyap6935]

can you make a small size fvp plane. the plane you make is big in size. so i cant make it

[@superpela1]

Awesome!!!

[@JuliusPerdana]

Thanks!!

[@ВитлийИваноа]

Приводняется очень красиво.👍👍👍

[@tipchannel1540]

Itu boleh di pancing om danau nya?

[@JuliusPerdana]

boleh tapi jangan, nanti menganggu orang main RC ya :p

[@tipchannel1540]

@@JuliusPerdana ooo itu area buat aeromodelling ya pak

[@JuliusPerdana]

@@tipchannel1540 bukan ada kok yg mancing, bebas aja saya becanda aja hehehe

[@tipchannel1540]

@@JuliusPerdana oooo.. bisa aja si bapak

[@hanimusmantoro7682]

mulus beud om landing yng ke duanya

[@chriswoods3742]

Can you build a helicopter fuselage 600 size?

[@JuliusPerdana]

I will, when I have a 3D printer

[@chriswoods3742]

@@JuliusPerdana can I suggest Airbus H160

[@robotcrypto2506]

Keren koh!

[@pbyguy7059]

I approve

[@collinmccallum]

nice :)

[@shehanmadusha7286]

Super

[@JuliusPerdana]

So nice

[@roostercogburn606]

Love your work ,you now have too much up thrust 2-2.5 degrees max up thrust re-test for c of g .adjust cg 70%should be close remember up thrust is because motors are in top of wing behind or in cg acting as a level pushing nose down you should be able to go from full power climb cut power to idle and it should smoothly transition to a steep glide

[@JuliusPerdana]

Thanks for the tips!

[@MABOOR]

Sukaaaaaaa ❤

[@mauroignacio3907]

agora ficou bom kkkkk

[@marcusdedge3586]

Not the airplanes fault. You need to build up some speed before pulling it off the water. Respectfully just saying.

[@piongsatiyo04burma8]

Sapa Tau Bisa Membantu , Saya pemula armodeling . Mau belajar simulator dulu . Saya udah download Smartpropoplus di komputer lenovo windows 10 tapi Gk bisa conect ke Rc Flysky padahal udah pake kabel simulator mohon bantuannya🙏

[@JuliusPerdana]

dulu beli kabelnya di mana, coba tanya penjualnya aja. Karena saya ga pake smartpropo, TX bisa langsung konek tanpa software Jumper T16

[@piongsatiyo04burma8]

@@JuliusPerdana terimakasih Informasinya Pak

[@TheRicsta]

Marbuti

[@renelaizer6518]

Be gentle with her....