Watch this Ultimate Delonghi Dedica Video...you'll thank me later.

[@TomsCoffeeCorner]

Thanks for watching! Comments welcome! Full list of accessories in the video description above! 👆🏻 Lots more information here: tomscoffeecorner.com/delonghi-dedica-the-ultimate-review/ Want to support the channel? Shop Amazon with my affiliate link: amzn.to/3tU9btX (it doesn't cost you anything more, but I earn a small provision if you buy anything). (these are affiliate links that help fund videos like this, at no extra cost to you)

[@lapintabrewing8801]

Where could i find that steam wand?

[@atruceforbruce5388]

The whole damn shot was crema. Are you a wizard! Coffee 🧙‍♂️

[@TomsCoffeeCorner]

@@lapintabrewing8801 It’s the Rancilio wand. I did a video on it. ;)

[@soarta]

As someone who just bought a Dedica as recently as a couple of weeks ago - this video is a GODSENT. Thank you so much for putting all of your gadgets/aftermarket mods and advice into one single video, Tom! Much love.

[@jasonng5194]

@@phillipzx3754 are you able to share any details on your project? ive been intersted in it but i have no clue where to start

[@phillipzx3754]

@@jasonng5194 I'm just going in blind. The first thing I did was build the version for an actual Gaggia Classic. I followed Tom's lead on where to install the pressure sensor. I had originally placed the thermocouple next to the pressure sender, but it wasn't very accurate. I found a nice spot on the boiler. The whole thing can be placed where the stock circuit board fits. Tom..if me providing these links rubs you the wrong way, let me know. My KZbin channel is pretty dead and this is probably the best way to show what a fool I might make of myself. 🤣 Where I left off today... kzbin.info/www/bejne/mn-bYWx5q9l7nZo

[@jasonng5194]

@@phillipzx3754 where do you have the pressure sensor connected and which one did you use?

[@phillipzx3754]

If anyone is interested if the Gaggiuino mod works in a Delonghi Dedica: kzbin.info/www/bejne/f2GZgHWggs2XadE

[@capazity247]

This is probably the best video in the entire field of Dedica upgrades. Only useful upgrades, quality choices, well explained. Great job, Tom 👍

[@TomsCoffeeCorner]

Thanks for your kind feedback! Cheers!

[@jazzeppelin]

I bought a DL2TH26E pressure less basket and it didn’t fit the tamper and the leveler. It was too narrow. I sent it back to Amazon. Are there any high quality baskets that fit the 51mm tamper or should I be satisfied with my cheap baskets? In what way doe’s expensive baskets make a better espresso?

[@johnhan9171]

A late reply but in case someone else is wondering. I got the HUGH basket and it fits my 51mm accessories fine without hassle.

[@Heimarbeit666]

The video about retrofitting a rancilio milk wand was epic as well

[@TheNunakun]

I don't own any coffee machines, don't plan on buying a Delonghi, but enjoyed every single point you've made. I'm sticking around your channel, subbed. Thanks a lot!

[@TomsCoffeeCorner]

Awesome, thank you for the feedback!

[@Goatmasterfunk]

Just a quick update from me. After watching your videos, I upgraded and invested in the Normcore bottomless portafilter, and the IMS 16-18 basket. Once I’d done this, it revealed my existing grinder was rubbish so I went for the Baratza ESP. Wow is all I can say. I know I’m using very high quality beans and I honestly think I’m making flat whites that are better than most commercial outlets. Not arrogant, just a bit of a tribute to the education I received here.

[@TomsCoffeeCorner]

That's awesome - thanks for sharing your experience! With good beans and a decent grind, and watching your ratios, you often can do better than cafes, especially the ones where the baristas don't watch their ratios, nor steam silky milk. Cheers!

[@blairhesson660]

Hey, I have the same grinder it’s great! what grind size are you using?

[@Goatmasterfunk]

@@blairhesson660 I went as low as 11 I think. But I’m using some different beans currently and up to 14. They say start at 15. I think it all depends on the beans you’re using

[@blairhesson660]

@@Goatmasterfunk yes It does say 15, I’m using a dark roast so I’m at 17. I have the delonghi pressurised baskets and I can only fit 12g of coffee grounds in the double.

[@Goatmasterfunk]

@@blairhesson660 sounds about right.

[@6229013]

Initially, I was disappointed with the results of this DeLonghi espresso machine I purchased last week and had planned to return it. However, after watching your DeLonghi videos , I have decided to keep the machine and upgrade it with the accessories you recommended. Thank you very much, Tom! You always have a positive attitude and a nice vibe 👍

[@TomsCoffeeCorner]

Thanks for your feedback, and have fun with the machine! Tom

[@nurousek123]

How’d it go?

[@nightfalls5462]

Its been 1 year now, still happy with it? And got better at making coffee? Pls RESPOND!

[@LawrenceHuxley]

Hey Tom, I’m new to the coffee game, I’ve just bought one of these Dedicas on your recommendation. Now wanted to say thanks for this guide too! Keep it up.

[@TomsCoffeeCorner]

Thanks for your generosity, and for your feedback! Tom

[@rbrtcrowther]

Having never had a coffee machine ever I’m buying this machine based on your reviews and demonstrations. It’s a great channel and I’ve watched all your content. Very very helpful for a beginner like me👍

[@TomsCoffeeCorner]

Thanks much for the feedback! Have fun experimenting!

[@stipekulas-p6g]

I bought a double baske by ims and a bottomless portafilter that you recommended for the dedica device. but when I put the coffee in and run the water, the syringe does not go as well as in your video, there is no cream and it looks watery and black. why is that and am i doing something wrong?

[@algimakarvelyte7506]

More likely your grind is too coarse and you need to grind finer.

[@MrAndrewHints]

For those looking to upgrade the portafilter make sure you buy one that has the correct number of ears! For instance my machine is a EC885m and requires a 3 ear portafilter.

[@Needletalk]

Wow how far this machine go, I remember a few years back we didn't have such cool accessories. This is a great time for this hobby.

[@romanchaley8051]

Thank you so much for this video! I couldn't find any decent portafilter in local shops, and after your video I ordered the Normcore one with the IMS double basket. Oh man what a difference does it make! Worth every penny, I can feel so many new tastes in my espresso

[@TomsCoffeeCorner]

That's awesome, thanks for the feedback! Have fun experimenting! Tom

[@laowai2000]

This machine just arrived today. So grateful for the content and the channel. Bingeing.

[@TomsCoffeeCorner]

Glad you enjoy it! Have fun experimenting!

[@fratini.]

Simply the best content about the Dedica on KZbin.

[@Im_AshParker]

Thank you! I've had my dedica for a year, and it completely died. I found a video on how to replace the pressure valve and water pump. Did that and then discovered the double espresso basket was shot. I've been wanting a bottomless portafilter anyway but these additions I'm getting them too! I'm excited for my espresso to be even better than it was.

[@TomsCoffeeCorner]

Excellent - hope you enjoy!

[@ptorru]

Thank you Tom! This has been very useful! One note, the linked Normcore portafilter will not fit the Dedica Maestros (ec900 and ec950). The IMF basket has been an amazing and instantaneous upgrade in flavor! Again thank you so much! ☺️🥳👏☕️

[@TomsCoffeeCorner]

@@ptorru Thank you so much for your support! You are right, the EC 900 and EC 950 do require the PF that fits the La Specialista line. I’m glad you are enjoying your machine. :-)

[@marcuslikespie]

Really appreciate this video as a new owner!

[@MrMp3sponge]

Just bought this model from a used marketplace that was barely used and looks mint. Made my first double with milk frothed. I had problems due to the Almost Lactose free milk (while it worked, it became too foamy), seems it would lack certain proteins to make the proper consistency of milk at the right temperature. I'll invest in those upgrade items this week. Paid $140.00 cdn for the unit, I'm already in love with it.

[@Yamazuya]

Und das Video finde ich direkt nachdem ich eine Dedica geschenkt bekommen habe? Zeit direkt aufzurüsten!

[@Heimarbeit666]

Lohnt sich. Allerdings würde ich nen vernünftigen grinder kaufen.

[@faloxv]

Not lucky yet to own one but I had to say that your videos are one of the best videos ever that make it look very simple and motivating to get a machine. Thank you for all the efforts put in making such great videos ❤

[@TomsCoffeeCorner]

Glad you like them! Look on the used market maybe - these can be quite cheap used. Cheers!

[@brucelaird1619]

Thanks!

[@TomsCoffeeCorner]

Thanks so much for the support!

[@moskitoh2651]

I bought nearly the same machine + accessory without watching your video. However I bought the ec885 and I am getting brilliant milk foam out of the box. Because of a useable tamper and milk can included, those 50$ more is a good investment. The grinder which goes fine for me is a sage barista pro.

[@BlackReisu]

Thanks Tom. I'm having an issue lately with the dedica with side channeling. Mine is fully modded but it didn't happen before. No amount of wdt changes anything. Coffee still tastes good though but it's messy. I'm thinking about a puck screen.

[@alinaqirizvi1441]

Try the paper filter puck sandwich method

[@BlackReisu]

@@alinaqirizvi1441 Will do. It remains that I'm yet to find cheap 51 mm paper filters. It doesn't seem like it, but it adds up.

[@daylight31415]

you can see that Tom is getting channeling as well

[@TomsCoffeeCorner]

It really seems to have a lot to do with the beans, and grinder performance. When I use Dinzler Roma, I practically never get side channeling.

[@TomsCoffeeCorner]

Using paper filters on the bottom can help to reduce channeling, but I find the espresso comes out a bit too watery at first...

[@Nocticoff]

Thanks so much Tom I think you are very honest man. I really appreciate it all your advice.

[@LisaStein-b5k]

Hi Tom, Your videos are the greatest! I just bought a Dedica EC680M. Here you are mentioning the shower curtain

[@gersonstandke]

I liked this video very much, so complete with demos, features and understanding about our Delonghi Dedica. Tks for sharing with us! I have a Timemore C2 grinder, could you explain how many clicks to adjust for Expresso ? I usually set it to 10 clicks. Tks in advance!

[@TomsCoffeeCorner]

Hi there! I had a Timemore Chestnut, and ran that at 7-8 clicks. You just have to experiment and find the taste you like. Try to aim for a double yield of the coffee, in 25-30 seconds, and adjust to taste.

[@hardmanst]

I have been following your channel since getting my EC685 some months ago. Started with pre-ground beans before getting a bottomless portafilter, manual grinder and scale as per your recommendations. It took trial and error to get the correct setting on the grinder before I got a smooth and consistent flow from the portafilter. Thanks for all your valuable advice. As an aside I am getting good exercise using the manual grinder 😂😂

[@TomsCoffeeCorner]

Thanks for your support, and glad you're enjoying it!

[@hawksights]

Pump pressure is usually measured right after the pump where there is maximum pressure due to the thin line.

[@GriuGriu64]

My dedica, just started a new life in my holiday house. Following a break not using the machine for several months, return was amazing!! Rich, tasty, juicy, with very good extraction!! Receipt, 18 gr in 45 gr out. Fillowing flat white removing pinarelo ...

[@TomsCoffeeCorner]

Awesome, glad to hear it!

[@GriuGriu64]

@@TomsCoffeeCorner ims dl2th26e is perfect for dedica!!

[@ResistanceQuest]

I was about to curb my dedica, literally, until I realized it could be a true contender with a simple portafilter/basket replacement. So glad, because I don't have $500 lying around! Thanks for all these tips. I'll probably buy all of these doodads

[@TomsCoffeeCorner]

Awesome, thanks for posting!

[@ashutoshuttarwar1]

Im enjoying this machine and your videos were one of the reasosn i bought it. The only thing ill say is that people who use pre ground coffee can face issues. It needs a fairly coarse grind and a fine one will choke the machine. It's been difficult getting the right grind because i dont grind my own coffee so i have to buy pre ground 200-250 g at a time and keep trying

[@Goatmasterfunk]

I found these videos very helpful. I have a 685 and have recently bought the Normcore bottomless and the IMS H26 basket. I’m really struggling with extraction though. Hardly any crema - just a ring around the outside, some spraying, and for around 16g of coffee / 35g total liquid, in extracting in just 22 seconds. My Bodum burr grinder is on the finest setting too. Definitely using good beans and to be honest the pressurised baskets have always given me good results and great crema. I’m a bit stuck on what to try next….

[@TomsCoffeeCorner]

Well, the Bodum grinder is not meant for non-pressurized extractions. I'd try a grinder dedicated to espresso for that. Here's a few to check out: kit.co/tomscoffeecorner/grinder-suggestions

[@Goatmasterfunk]

@@TomsCoffeeCorner thanks for the response! I’ll look into it

[@Goatmasterfunk]

@@TomsCoffeeCorner looks like the Kingrinder K4 has a global shortage. Not sure if it’s been discontinued?

[@Goatmasterfunk]

@@TomsCoffeeCorner hi again. I’ve had it confirmed the KINGrinder K4 is now discontinued. I guess they’re replacing it with the K6. Any opinions? Thanks as always

[@allwynjohn9997]

Interesting bit about how to turn the flashing lights off! I have been using an alternative I found out for years now, it’s as simple as switching the machine off, waiting 5 seconds and turning it back on. But yours is cooler and I’ll take it any day !

[@TomsCoffeeCorner]

Nice! Thanks for the feedback!

[@saboteurs964]

I just ordered Dedica and I am very grateful that you made this video! Very helpful! :)

[@Kokeshiflower]

I just bought the new Deduce 885, and so far I am loving it. It's a learning curve from someone who owned a Lavazza pod machine, and I am slowly getting used to it. My next upgrade is to get a bottomless portafilter and then a grinder. I am watching all your videos now :)

[@TomsCoffeeCorner]

Awesome, thanks for sharing, and have fun!

[@laowai2000]

A good grinder is a game changer combined with open portafilter.

[@Heimarbeit666]

Which grinder did you get? For me it was a fellow opus

[@UbiMortus]

I got my Dedica in December, I'm really interested to start out purchasing some accessories. I like the way the machine works stock (I'm not a picky customer 😂) but if I could get better results for not much more investment, that's always welcomed.

[@chryseass.5143]

Hi Tom, I will shortly be returning to where my Dedica is and I have bought a beautiful new bottomless portafilter, a Matow palm distributor, and a nice heavyweight tamper for it. I am also bringing along my set of scales. All of these were bought after watching your informative videos! I am hoping to get an amazing coffee from the Dedica but will probably have to source some good beans and a grinder! I will report back if the old Delonghi non pressurized baskets that I had with my old machine will fit in the new portafilter. Btw , now having used the Sage/ Breville Bambino Plus and the cheaper Bambino machines which I have set up in similar ways, I would tell anybody looking to buy between these two machines that the extra money for the Plus is definitely worth it even if you don't care about the auto frothing ( I never use it) . Everything about the Plus is better quality than the stripped down Bambino which I would not buy again if I had to it over. Just my opinion.....

[@chryseass.5143]

A quick update- the old non pressurized baskets did not work in the Dedica but the new bottomless portafilter had one included. My advice on the Bambino Plus being worth the extra over the more basic Bambino still stands . I have being using the automatic steamer on the Plus occasionally and it can be a fun time saver- works surprisingly well!

[@markholtom6353]

Hi. Thank you for the video. I have had a Dedica for a few years and thought I would upgrade using your suggestions. So far I have the naked filter holder and basket. I tried this and the results were really disappointing. I got an espresso that was much weaker than before and without a hint of crema. This is compared to using the standard pressurised basket. I have tried several times using store bought Lavazza espresso grind and note that delivery is fast (high pressure?). This is despite tamping as firmly as I possibly can. Can you suggest what I may be doing wrong.

[@waffen7000]

I have the same problem! unfortunately in my country, Iran, coffee beans are imported and packaged in bulk and unprofessionally. Even the most DeLonghi sellers themselves do not know what coffee to use for the 685 espresso machine to give a good crema. They test the extract with a china cup so that no one notices its very low crema. The truth is that DeLonghi does not give good crema with every coffee bean. You have to search a lot in the coffee market and do trial and error to get the right combination🙏

[@TomsCoffeeCorner]

Hello there Mark! I’m guessing that your beans are probably too old - or in other words roasted too long ago. These videos may help: How to Get Crema: kzbin.info/www/bejne/ZmGxhHpvaZpsl5o Why Supermarket Coffee Beans are RUINING your Espresso! kzbin.info/www/bejne/a3PKfn6nqp2ZgKs How to estimate bean roast age for Lavazza: kzbin.infoQmVRpBGOokE How to extract the perfect espresso: kzbin.info/www/bejne/ppqyZ5ZsbpqCppo ***I’d recommend looking on google maps for local coffee roasters. That's the best way to ensure freshly roasted beans. Cheers, Tom

[@AhmetRendeTech]

Thanks for the this video! Are these tricks applicable to the Delonghi ECov 311?

[@TomsCoffeeCorner]

It will be similar, but that machine has a different brew group. So make sure you get the right accessories. Cheers!

[@erikaplepyte6923]

Thank you for explaining. I watched your another video where you talk about plastics in coffee machines. My question is, does this coffee machine have many plastic parts in contact with hot water?

[@TomsCoffeeCorner]

They are silicone and nylon lines, yes. In fact, every thermoblock machine has flexible nylon and silicon lines inside. Cheers!

[@erikaplepyte6923]

@@TomsCoffeeCorner Thank you 😊

[@mixerD1-]

Buying one of these today..and using this as my reference video.. Thank you Tom.😁👍🏼

[@TomsCoffeeCorner]

Fantastic - have fun!

[@emrahdaglik357]

Hi Tom. Thanks for video. I use bottomless portafilter but I cannot have crema as yours. I have Graef Cm702 grinder, even I grind at the finest degree, I take only black espresso without crema. My coffee dose is 16 grams at least. I tried with robusta beans but still same.

[@TomsCoffeeCorner]

Hello there! Yes, your beans are probably too old - or in other words roasted too long ago. These videos may help: How to extract the perfect espresso: kzbin.info/www/bejne/ppqyZ5ZsbpqCppo How to Get Crema: kzbin.info/www/bejne/ZmGxhHpvaZpsl5o Why Supermarket Coffee Beans are RUINING your Espresso! kzbin.info/www/bejne/a3PKfn6nqp2ZgKs

[@JuuPau]

Got straight answer to every question I had about this. Thank you. Very informative.

[@nelsonsa1374]

Hey Tom, Can you please suggest about capsules adapter for? Thanks for ur videos :)

[@TomsCoffeeCorner]

Sorry, I don't know of one, to be honest. Anyone else?

[@GillsOnMyNeck]

Very informative video! Can you tell me what tamping stand/surface you’re using in the video?

[@TomsCoffeeCorner]

That's a Motta tamping station. Cheers!

[@ewapilaszek5267]

thank you so much, I'm a newbie to using an espresso machine (just bought a bit different model of delonghi) so the video couldn't be more helpful. Really looking forward to learning more :)

[@NolocoLawrence]

Posted a month ago. I just picked one of these up for $10. I have no clue what I'm doing and I very much appreciate this video. I will be learning and making some espresso. I have three already ground packs that probably aren't the best but hey they were free. I was just going to try to see what I can do without an espresso machine. I just so happened to come across this one today at a garage sale. Also got a very nice grinder to go with it. I don't know if it works yet. I know the grinder turns on. I'm liking the Colectivo shirt. I sure do miss Milwaukee and all the Colectivo locations

[@TomsCoffeeCorner]

Wow, nice! Great deal on the machine, and it's nice that you know Colectivo too! It's my favorite coffee shop in the area, that's for sure. The atmosphere and the drinks are great, albeit expensive. Part of the reason that I started on the home espresso journey. I still like to go there when I am in town. Anyway, which grinder did you pick up? Cheers, Tom

[@falcon81701]

Great video. I just ordered the IMS filter as the one I have been using that came with my open portafilter holder from amazon has bowed at the bottom as described in the video. The result of this is too much flow and I have to keep dialing my grinder to a finer setting which still gives me too much coffee.

[@cholomeu]

Hi Tom, bought this machine week ago, I'm trying to learn about world of coffee. The problem is that shots are quick and with no crema. I'm using bottomless (generic basket) portafilter and coffee is grinded in the finest grade of a mellita grinder. With stock portafilter shots are quick but with a few more crema than with bottomless. Coffee was lavazza Rosso recently bought in supermarket and shots were well tamped. Thanks, great videos!

[@bradkerr8746]

You’ll have a much more pleasant time if you source some freshly roasted coffee. Means you don’t need to grind so fine. Supermarket coffee will almost never tell you when it was roasted. Aim between 8-10 days after roasting, and then to use it before 4-6 weeks after roast date

[@H3ctorV3ctor]

Hi Tom. Have you tried some attachable nozzles to replace the original panarello? I mean in order to get better steam without the lengthy process of changing the whole steam wand for a Rancilio One. Would like to see a video of that attachable steam nozzles. Thanks.

[@TomsCoffeeCorner]

I did try that once, but it wasn't a good fit on all machines. Maybe I will revisit that...

[@ThomasOvens-dv1fi]

Thanks

[@TomsCoffeeCorner]

Thanks so much for your support!

[@lynngatti8592]

Your videos have been immensely helpful. I made some upgrade’s you recommend with great results. Question- should I be using a water filter cartridge with my machine (inserted in water reservoir) our water is hard. Or do I just descale monthly. I Britta filter my water.

[@TomsCoffeeCorner]

I'd recommend filtering with the Brita, and descaling regularly. Cheers!

[@jennybermanable]

Thank you so much for all of the great info! Can you please share how you’ve upgraded the steam wand? I’ve blown the rubber tip off in my milk every time I’ve used it. I tried the zip tie, and clearly I’m not doing it right.

[@TomsCoffeeCorner]

You have to put the zip tie right in the divot. Check the picture here (about 60% down the page): tomscoffeecorner.com/delonghi-dedica-the-ultimate-review/

[@TheOne-dc8bo]

Hi Tom, can I change the steamer arm as mine is full of plastic

[@liamhotchkiss]

Been looking for a good video review for the dedica for the longest time. Great review and discussion about different accessories.

[@chaddyaniwcellist]

Great video! Have you since tried out the larger 20-25g capacity IMS basket (H32)? I have an EC885, and was curious about trying out that basket with it.

[@TomsCoffeeCorner]

No, I have only tried the medium sizes. Cheers!

[@EmreAydnsoy]

Hi tom, first of all, thank you. I have a DeLonghi machine and your videos have been very educational. I have one question about the leak problem. I use bottomless portafilter but some beans are making leak some beans are not. also, I using a timemore c2 grinder. do I need to adjust the grinder for all beans? Or do I need to change parts on my machine?

[@TomsCoffeeCorner]

Do you mean channeling? You might need to check your puck prep, or make sure you are using freshly roasted beans. Check these videos for a reference: How to extract the perfect espresso: kzbin.info/www/bejne/ppqyZ5ZsbpqCppo How to Get Crema: kzbin.info/www/bejne/ZmGxhHpvaZpsl5o Why Supermarket Coffee Beans are RUINING your Espresso! kzbin.info/www/bejne/a3PKfn6nqp2ZgKs

[@mjscrambler]

Just started seeing your videos. Thank you. Cannot find a bottomless portafilter for my ecp 3630. I did see your video about drilling a hole. But I don't understand why I cannot purchase one???

[@TomsCoffeeCorner]

Which market are you in? This link should work: geni.us/EC155Portafilter (affiliate link)

[@mjscrambler]

Thanks for the fast reply Tom! I finally found this one on Amazon and purchased it. Joytata 51mm Bottomless Portafilter for DeLonghi Espresso Machine Stainless Steel Portafilter, 51mm Portafilter 2 Ear for ECP3420/ECP3630/ECP3120/ECP260BK/ECP702 Handle- Plastic Hope it fits. Mike

[@mjscrambler]

It was the only one I could find that actually stated it fit the 3630 model. Unfortunately it had no reviews.

[@patriciaschneider-zioga2500]

My Dedica, which I bought last year in Athens, Greece, has a horrible steam wand--it is for clueless people and I haven't found a trick so that I can use it for microfoam which I usually easily make with other machines (I also have a gaggia but I modified that wand with a rancilio steam wand). Thank you for any steaming tips if one has the bad steam wand!

[@boshkostojchev8855]

Love this video, I realy like to see comparrison this machine with Ariete 1381. It looks like it is the same magnufacturer as Delonghi, so I am pretty sure you going to get more from the Ariete 1381 compared with EC685 for the price.

[@TomsCoffeeCorner]

No, the Ariete looks like the standard chinese model, like the Gevi 20 bar, Silvercrest SSMS, or Koenic. I think those all come from the same off the shelf chinese supplier. Not the same as Delonghi.

[@Geraldodotz]

Savage video dude. I have the same machine but since I switched to open portafilter I can see a lot of “spray” or “channelling” which is super annoying. I’m gonna upgrade to the IMS basket as I can’t seem to find what else it could be. 😮

[@TomsCoffeeCorner]

Hello there! I’m guessing that your beans are probably too old - or in other words roasted too long ago. These videos may help: How to Get Crema: kzbin.info/www/bejne/ZmGxhHpvaZpsl5o Why Supermarket Coffee Beans are RUINING your Espresso! kzbin.info/www/bejne/a3PKfn6nqp2ZgKs How to estimate bean roast age for Lavazza: kzbin.infoQmVRpBGOokE How to extract the perfect espresso: kzbin.info/www/bejne/ppqyZ5ZsbpqCppo ***I’d recommend looking on google maps for local coffee roasters. That's the best way to ensure freshly roasted beans. Cheers,Tom

[@antoniomaestas6147]

Tom! I’m not sure you remember me or not we did a WhatsApp FaceTime a few years ago when you helped me out with an accordion issue. Crazy thing is, I’m now an accordion tech (completed a 2-year apprenticeship) and I’m also doing coffee stuff now 😂😂😂 dude that’s how I found this video! I’m glad you’re well my friend!

[@TomsCoffeeCorner]

Haha, that's so funny Antonio! Hope you're well. Where are you based out of? Sometimes I still get requests for repairs, and I tell people they have to find an accordion tech. Cheers!

[@MaryRoach-n9r]

Hey Tom, your videos are helping me get the most out of my Dedica machine. Thank you! One question I have been struggling to find an answer to is whether or not you can get a good shot from the Dedica using Illy espresso ground coffee? (I appreciate you can get better coffee with freshly ground coffee). I see a few people complaining that the Illy espresso grind is super fine but would love to hear your experience

[@TomsCoffeeCorner]

Probably not, because that pre-ground is usually MONTHS old, and therefore has lost its freshness even before opening the bag.

[@FavorisAude]

Many thanks for this great video. Just a few questions on my side to be sure: a. Would it work to remove the plastic of the Dedica porta-filter and put an IMS filter in the original Dedica porta-filter ? Or is there no other way than changing the porta-filter ? b. With a new porta-filter and a new filter, how do you serve 2 expressos at the same time ? Many thanks again

[@TomsCoffeeCorner]

Yes, you can easily remove the plastic insert - just know that then the espresso will come out of 3 holes, instead of two. Cheers!

[@FavorisAude]

Well spotted indeed ! Is there no simple way to serve two cups with a non-pressurised filter ?

[@timt8199]

Yhis was an enjoyable review. Not too drawn out and informative. Thank you.

[@toramax80]

Could you please show how to install a thermometer on this model and also can you tell more how to change the steamer on this model. Thank you for the video!

[@TomsCoffeeCorner]

Sorry, but I don't have a thermometer to install...there's no threads for one AFAIK. Steam wand replacement: kzbin.info/www/bejne/l4LUlnxooK-NgJYsi=_UFW5kV7PkgbAHBB

[@AntoninJezek]

Thanks for mentioning how you may not be able to taste the difference between the expensive shower screen. I got a free dedica when I moved in, and I don't care about getting everything dialed in. I just want a passable espresso, not a hobby, but I appreciate your video teaching how I can do some simple stuff with my machine.

[@KonGab03]

Just a pair technical question, -in a single basket do I have to finer grind settings to hold the 30 sec brew -time but the bitterness belongs of the fineness of the coffe. What is the best way with a single basket? - do you recommend the paperfilter under the coffee in the basket? Your videos are very helpfull, Danke!

[@TomsCoffeeCorner]

Servus! Yes, I find that a finer grind is necessary for single shots. The jury is out for me whether or not to use paper filter. You have to choose yourself...I think it removes some mouth feel, which I prefer to preserve. Cheers!

[@reboot107]

Just upgraded my steam wand from your amazing video on doing so. Curious if you could use this bottomless portafilter with the double basket for single shots. Or do I require a different portafilter and basket for singles? Thank you very much for your informative videos 🙏

[@TomsCoffeeCorner]

You'll need a single basket for single shots, at least that's what I find, because there's too much head room above the puck if you underdose in a double basket, and the shot runs too quickly. Cheers!

[@nikosloukopoulos979]

THANK YOU VERY MUCH.. your video about the descaling porcess was very helpful too. Do you have any suggestions for a better home espresso machine up to ~500 euros?

[@PedroHernandez-qz9nv]

Thank you Sir Tom. I am busy buying accessories. Blessings

[@BrunoSilvaa36233]

Amazing video, thanks. Any idea on unpressurized 1T alternatives (1shot expresso)?

[@TomsCoffeeCorner]

Hi there, yes Graef makes one: geni.us/GraefSiebe

[@Fabio_Florio]

Hi Tom, thanks for your tips. How can I add the manometer (like yours) to the filter holder?

[@TomsCoffeeCorner]

I think it's in this video: kzbin.info/www/bejne/nJSYn4p6r9iFmK8si=qy5FcEbRxa7qAFbl

[@Fabio_Florio]

@@TomsCoffeeCorner, not exactly 😅. I would actually like to buy a filter holder with an added manometer…

[@mattbinks4417]

Hi Tom! Thanks for the videos, they are definitely enhancing my enjoyment of my Dedica. I am wondering of you use a non-pressurized portafilter capable of 2 streams. I enjoy making 2 shots of espresso at once using the provided filter and would like to try a non pressurized one. Definitely going to pick up a bottomless however, from what I can tell, it will only do single stream. Thanks again!

[@TomsCoffeeCorner]

Sure thing! I see Neouza is making one now. I have used their products before, and they are good. amzn.to/3tRYSpO (affiliate link).

[@dnqci9857]

What will be the sifference and how drastic is it if i use pre grindet beans instead of buying a grinder and grinding them myself? Because my budgest is tight i would hate to spend 30 bucks or more on a grinder(and the one im looking at rn is like 84)

[@TomsCoffeeCorner]

You will save money in the long run, buying a grinder, because whole beans are generally cheaper than pre-ground. Look at the Kingrinder K2.

[@dnqci9857]

@@TomsCoffeeCorner Tanks man

[@twowheellatte]

I saw a nozzle for the steam wand on your counter, but you didn't mention it here. Do you have another video about this accessory, or could you make one?

[@TomsCoffeeCorner]

Hi Tom, I wanted to include it, but I cut that part out. The thing is, for some machines, the metal nozzle works ok, and for others, not really. But since I don't have ALL machines to try it on, I didn't want to make a statement on it. If I remember right, it fits fine on the EC685, but not on the ECP3120.

[@andresvelasco8021]

Wow amazing video! Thank you for all the great info!

[@TomsCoffeeCorner]

Glad you enjoyed it! Have a good day!

[@xavialvarez]

Hey Tom, thank you for all your videos and information. One question about IMS basket. Why people choose DL2TH24E or DL2TH26E to make a single coffee if with the 22E you can do it as well with less coffee. I don't understand. Thank you for you answers.

[@Sampdelu]

I have always loved your approach to videos. You are one of my favorite KZbinrs regardless of content. I love how your demonstration is the main takeaway of the video, and you are there simply to deliver the content, rather than being ofer the top and "showy". Although, I think I am realizing this is due to me being a Minnesotan, and growing up in an area with a similar personality ;)

[@TomsCoffeeCorner]

That is so kind of you to say, thank you for your feedback! I have fond memories of ice fishing on Winnebegosh. Great fishing you got over there in Minnesota! Just hope my Packers can beat the Vikings without ARod, but I don't think so. :( Anyway, cheers and have a good day! Tom

[@Sampdelu]

@@TomsCoffeeCorner Not a problem at all! I do feel rather spoiled with the fishing in Minnesota. I have great memories of the Apostle Islands, and the Bayfield Apple Fest. Also, I fear that both our teams might be taking a back seat to the Lions and Bears for a few years unfortunetly :(

[@128HH]

Thanks for a great video Tom !!! If I have to choose 2 out of the 3 accessories, which will you suggest that affect flavor and quality of a shot most?

[@TomsCoffeeCorner]

IMS basket and a decent tamper. Cheers!

[@miguelangel49000]

Hi! I really appreciate your channel, it's a huge source of knowledge! I have a doubt about the IMS basket. Can I use it with the original portafilter? Another question is if the original tamper (that comes with the Dedica Arte) fits the IMS basket; I've read it's so tight and many people get problems with that. Thank you so very much for your great content! Greetings from Andalucía!

[@TomsCoffeeCorner]

Howdy! You can use the IMS, but you'll have to remove the plastic insert in the PF. Tamper should fit fine, in my experience. Cheers!

[@lfe_freddy]

Hi Tom, I really like your videos. I got myself a Dedica 855 and I love it so far. I'm actually getting pretty confident with it. But some questions are still unanswered and I couldn't find the answers on the Internet. So ... 1. When do you start the timer? With pushing the button including the pre-injection or after the pre-injection? I usually count round about 26 seconds after the pre-injection. 2. What is the right ratio for a single shot? I found that simply dividing the ratio of a double doesn't work. How much coffee in and how much out in which time? The coffee with a single basket doesn't run that smoothly than a double basket. It usually even runs faster. So with 9g in and a extraction time of 12sec I end up with round about 30g out. I think thats it so far :) Thanks for your answer and the nice videos!

[@magig5883]

My one-cup method: 10g in, 20-25g yield. 25-35 seconds with pre-infusion. For one shot, you need to grind it finer.

[@TomsCoffeeCorner]

Agreed, I have to grind a good amount finer for a single shot.

[@TomsCoffeeCorner]

I start timing at the button press, because that is when the puck starts absorbing the water. As for single shots, they are hard to do. You have to grind a lot finer, and even then they will run faster than ab double, relatively speaking.

[@magig5883]

@@TomsCoffeeCorner It is very difficult, but not impossible :). Check it out: kzbin.infoOuXBYIFxB3g I only try to make a single shot. My experience is that it is impossible to make the same shot twice.

[@joaopontespereira7589]

@@TomsCoffeeCorner the truth is we rarely see single shots, 7 to 10 grs, in internet (instagram, shorts, youtube, etc), we only see 16 to 20 grs shots. And the thing for me is, when I started "this barista thing", four monthes ago, I used to drink 2 coffees per day in the steet (7 + 7 grs). Now, I drink in my house the same 2 expressos, but with 15 + 15 grs! I doubled the caffeine per day. Only because I followed the mood in the net and it is really more dificult to make single shots! My question is why can we drink so nice 7 grs single shot in the comercial coffee shops and it is so dificult at home with the Dedica or the Specialista? Thanks in advance for your comment!

[@kostaskostas2470]

Actually 8-9 bar is better than 14-15 bar. Very pleased with that for espresso brewing. Thank you

[@anndorfman6519]

Your videos are great, so glad I found them. But I need help.... I thought I was making progress with my Delongi EC680 and aftermarket 2 shot bottomless portafilter basket using grind setting 5 on my 2 year old Baratza Encore grinder. Then the grinder broke. Baratza replaced it with same, and now 15 grams coffee at 3 grind, 20 lb pressure, gives me 70-80 grams espresso in 30 seconds, with almost no crema and very sour. So I went to my local high-end coffee shop (George Howell) and bought a lb of their one week old, fresh ground espresso. Same thing. What am I doing wrong? Are neither ground fine enough?

[@TomsCoffeeCorner]

I don’t think the Encore grinds fine enough out of the box for espresso. You might need to shim it, or consider a different grinder.

[@anndorfman6519]

@@TomsCoffeeCornerwhat do you mean by “shim” the baratza encore grinder?

[@BhaskarPoonam]

Thanks for the informative video, to the point & well done. What is good grinder to make best grind for De Longhi EC685.R?

[@TomsCoffeeCorner]

I'd check out the Fellow Opus or Baratza ESP.

[@ronnyskaar3737]

Do you think it is ok to program the quantity without coffee in the filter? Will it deliver the same amount later when there is coffee in the filter? Thanks for great videos. I just got my dedica, and I have had great shots and milkies. Best.

[@TomsCoffeeCorner]

@@ronnyskaar3737 to be honest, I don’t really think that’s going to work, because it will act differently, under load, compared to no load. But, you give it a shot and report back…

[@ronnyskaar3737]

​@@TomsCoffeeCornerYou are right. Completely different 😂.

[@dj-ff9su]

Can you tell me what the black rubber band around the filter is for????

[@TomsCoffeeCorner]

That's a gasket, so that you can pull it out to clean it.

[@dj-ff9su]

@TomsCoffeeCorner Thank you, I just got the dedica arte, its great so far but was surprised at rubber in the filter because of heat touching it and possibly melting or having rubber residue in my coffee. I'm wondering if there is any health risk......

[@SlWsHR]

nice as always. I learned how to use my dedica properly with your videos . can you provide a link to your non pressurized single shot basket please?

[@TomsCoffeeCorner]

It's part of the Graef set, listed in the video description. Unfortunately, only available in Europe...

[@szymonmakarewicz8161]

great video! can you tell us where you bought that other steaming pipe?

[@TomsCoffeeCorner]

Sure thing, here's the link: geni.us/RancilioSteamWand

[@octavioferraz]

great! whatever the profile of the coffee, is it always preferable to use the temperature hack before taking the shot? Should an unpressurized filter used in a non-naked portafilter be avoided?

[@TomsCoffeeCorner]

General rule is, lighter roasted coffee needs more heat. You don't always have to use the hack, but you can. It's nice to experiment.

[@Robin77436]

Hi Tom, Thanks again for a very nice and useful video! I am wondering about the different bottomless portafilters you suggest. Following the links you give, I see three brands: Normcore, Joytata and Fenteer. Would you say that one is better than the others? And what about the tamper: is there a brand that you would recommend? I long to see your advice...! Robin

[@TomsCoffeeCorner]

Hi Robin, I prefer Normcore and Neouza. Tampers are a personal thing. Normcore is good, but I feel that they will all get the job done. Choose one that looks nice and is in your budget.

[@Aycel1]

Thank you for your great videos. A quick question, I just bought the Dedica 685 and I wonder why should I buy those tools while I already got them all with the machine?

[@jmat46]

Hi Tom, I really like this video, do you have the purchase link for the grid that comes up at 5:45 - 6:00? thank you

[@TomsCoffeeCorner]

Hi, thanks for the Q! I added the IMS shower screen to the description. Cheers!

[@jmat46]

Tom, could you help me get a rubber ring for the shower screen? thank you

[@Chady]

Excellent tutorial!!!!!! thank you. one question pls. What height from IMS do you recommend for this machine? they come in 4 heights

[@TomsCoffeeCorner]

I like the H26 :)

[@Chady]

Going for it thanks​@@TomsCoffeeCorner

[@Chady]

@@TomsCoffeeCornerI found this verybarista IMS Precision 16-18g Filter Basket DL2TH26E on Amazon and ordered it. After waiting 2 weeks for delivery, it was a disappointment. Two different kinds of tampers 51mm could only fit in for about 2mm before they get stuck in the basket. Something about the basket being tapered. Did you use something different or i ordered something different? am totally lost now

[@humamtakla6894]

Thank you for the video. I want to ask how many espresso shots this machine can pull back-to-back perfectly without steaming?

[@TomsCoffeeCorner]

Well, you do have to wait 1 minute between shots, for the pressure to dissipate. Oh, and perfect shots have a lot to do with puck prep...plus the machine will get slightly warmer over time after pulling multiple shots.

[@blairhesson660]

Thanks for the video. If I want to pull two non-pressurised shots at the same time, what portafilter do I need for this machine?

[@josefranciscolemosneto8801]

Coul you please make a demonstration of the after market steam nozzle tip spout for Delonghi 680

[@TomsCoffeeCorner]

I've tried it on some models, and I didn't really like it. Just stick with the rubber nozzle, or replace with a Rancilio wand. Or buy the newer EC885.

[@charlesthevoice1064]

Awesome video and super informative Tom! I looked in your links for everything you used in your video but I did not see a link for the gadget you used to test your Bars of pressure. Do you have a link for that you can share? Thanks friend!

[@TomsCoffeeCorner]

Thanks so much! I got that manometer from Edesia up there in the UK. Cheers!

[@charlesthevoice1064]

@@TomsCoffeeCorner Thanks Tom! You rock as always!

[@rolgin]

Great video. What grind do you use with this machine? When I take espresso-like grind the machine can't properly push water through it. I guess there is not enough pressure and it is too tight

[@TomsCoffeeCorner]

Just coarsen the grind if that’s the case. 😊

[@vojkanstojanovic6039]

Hi Tom! 7:16 I have a one question .Can i use a medium roasted coffee beans for my Delonghi Dedica or only dark one roast beans becouse of temperature problem? Woud it be sour shot with medium roast beans?

[@TomsCoffeeCorner]

I've had good luck with medium roasted. You can also increase the temp if needed, by doing the steam mode hack. Cheers!

[@LisaStein-b5k]

Hi Tom, your videos are the most informative ever! Love 'em! Question: On this Dedica EC680M, can the pressurized puck w/handle be switched off with the non-pressurized accessory you recommended EIFOCWCY with the wooden handle?

[@TomsCoffeeCorner]

Hi there! I don't totally get the question. But yes, you can do a non-pressurized extraction with a bottomless PF and traditional basket. Good luck!