water damage memory card

for data recovery call: 855.366.4232
or request your service here: www.hddrecovery...
Data recovery software PC: www.r-studio.co...
Data recovery software Mac: www.r-tt.com/?J...
Data recovery equipment: www.acelab.eu.com
water damage memory card repair is something that we work with a lot. Most of the time we see the interface suffer on microSD cards and SD cards because the interface is exposed and water (especially salt water) can start a reaction quickly. Sandisk SD (like in this video) besides the interface, also leaves the technological pads open and exposed. In our case, some of the critical command signals had corroded so much, that our water damage memory card simply stopped seeing any data. Every sector would look blank
if you want to ship your failed device to us for data recovery and free evaluation, simply fill out this form: www.hddrecovery...
and send your drive boxed with bubble wrap to this address:
HDD Recovery Services
391 Bank St, Suite 201
Ottawa, ON
K2P 1Y3
Canada
Updated 2020 my gear for soldering:
I record all my videos using this HDMI Switcher: amzn.to/31LCsq6
Green inspection light amzn.to/2DFJoYu
Platter extractor: bit.ly/2YhQD2y
Momentary foot pedal switch amzn.to/2OSqjZF
Vacuum pump amzn.to/364XWxa
Cleanroom wipes: amzn.to/2ZLj49G
Programmer amzn.to/2DRjL7a
Quick pogo pin adapter for eepROM amzn.to/33TYVyO
Microscope: amzn.to/2rqWcwr
Vacuum chip pickup tool: amzn.to/2tNCSxc
Multimeter: amzn.to/2EHKAxO
Microscope camera 21mp 60fps 1080P: amzn.to/2Rb5cUq
JBC precision soldering iron and tweezers: amzn.to/33MACm8
Hot air station: amzn.to/2K7Mztk
Infrared preheater: amzn.to/2rYCH1c
Flux dispenser: amzn.to/2spLw4D
BEST Flux: amzn.to/2mXJd1b
Wick: amzn.to/2mNr0Xh
Solder: amzn.to/2mtyC0a
Solder paste for BGA reballing: amzn.to/2LrKQCi
NAND BGA rebelling stencil amzn.to/33Oq9a5
Gloves: amzn.to/2mbHWDI
Fume Extractor (mine is no longer available but this is the new version of the same unit) : amzn.to/2mNCmL7
Gear for filming:
small camera: amzn.to/2mNw51T
big camera: amzn.to/2Ficg9o
Lens on big camera:amzn.to/2Cx3fGw
this video: • 3 best data recovery h...

[@cocobongo268]

Afterdark Data Recovery videos... this is getting better and better... :) My best wishes, friend.

[@hddrecoveryservices]

you got it bro

[@wilfredobudy479]

so amazed with your patience and passion, i don't have that so the reason im hooked at watching you work. i know the technical details of what you do but not the patience on the details of what you put your heart on. great work!

[@hddrecoveryservices]

Thanks 👍

[@johncunningham5435]

Yes! I found the same method of repairs was spent putting thousands of hours on the bench with long hours and late nights. For me it is a passion like you, "I love solving complex issues".

[@wazoozastoob1234567]

Love the close up vids and insane soldering skills. Honestly enjoying your vids!

[@hddrecoveryservices]

Thanks

[@marcelbreiti8473]

A scale would be useful to truly enjoy the magnified soldering work!

[@hddrecoveryservices]

Good call!

[@Alftrek79]

Congratulations for 100K subscriptors!!!! Gretings from Barcelona, Spain.

[@hddrecoveryservices]

Thank you so much

[@emailfilters]

I wish it were so simple to repair _my_ memory (now, where did I leave my wallet?!) It's videos like yours and those of The Rossmann Group and Paul Daniels that help me to be able to repair handheld gas chromatographs and analytical balances!

[@AlvarossiR6]

Just amazing! I love to watch your videos because i learn a lot and you always surprise me in the way your repair the memory.

[@hddrecoveryservices]

Thank you very much!

[@paultomlinson528]

Excellent work well done, that's not an easy job for sure, I've not come across corrosion like that before and will look out for those signs next time I get a water damaged device in

[@arunsharmadatarecoveryspec1504]

Great efforts go bless you ..Want to ask question now a days you are working from home ! What about office?

[@hddrecoveryservices]

this setup is for YT videos on flash only. Lab runs much bigger operation, and mostly hard drive related issues

[@vinitsingh8962]

Sir, you have Great soldering skills, I also have great skills just need a microscope and I can sold anything. Even now I perform microsoldring but it is pain in the ass without microscope but with my skills and god given steady hand and great focus of eyes I am able to do that, it just takes a lot of time and patience.

[@hddrecoveryservices]

I can't imagine doing this without glass. Not good for eyes either. I have a microscope at the lab that we hardly use. I would be glad to donate it to you, but shipping it from Canada alone will cost more then buying a base scope from Union Repair.

[@MrZX1206]

Without revealing anybody's secrets, what sort of stuff do you recover? I imagine it would be mostly photos.

[@hddrecoveryservices]

Weddings mostly, commerical photoshoots, important milestone vocation trips

[@captidgas]

Nice showing your mistakes and successes

[@hddrecoveryservices]

Glad you liked it

[@gilgameshismist]

Me (until recently): I am great at soldering,. Sees him soldering the whiskers of an ant.. -ok, son of a b.. I don't know sh*t.. But that is more than impressive!

[@orfescuhoratiu]

Hi , i`m amazed by your work , what is best to have ? rusolut or pc3000 last gen usb ? i`m in process to got some software and i like more pc3000 .

[@mankindapparel]

such great skills - great tools - steady hand - that is some superhard microsoldering dude - great work

[@hddrecoveryservices]

Thank you!!!

[@ElektroTechNL]

Hello I have a question. My HDD is running and is then seen for 20 seconds. and then crashes. large chip at the top gets quite hot cooling with a pad does not help. how can i fix this to get my data back anyway.

[@alexc414]

How often do you run into problems that you cannot recover? It seems like you have a recovery and fix option for everything. Do you often have items that come in where recovery is not possible?

[@hddrecoveryservices]

We do get cases that can't be recovered. For hard drives it is because of the severe platter damage with no SA access. For NANDs it's internal problems with chips, encryption, or physical damage to the NAND.

[@Tatorhead1234]

I find this so interesting. How can I start this as s hobby without a huge initial investment? I actually have a micro sd card that cant be recognized by anything i put it in. Where do I get the knowledge needed for this?

[@-Tidgy]

Do you fix cards from anywhere in the world if they’re sent to you? How much do you charge to repair or transfer data from the broken micro sd to a thumb drive to then send back to us?

[@hddrecoveryservices]

Yep, worldwide bro. Physically broken MicroSD is probably trash however

[@ericross79]

Are you able to recover content from a Samsung S7 internal HDD chip?

[@1MiketheMechanic]

How else are you suppose to clean your SD card? Premature congratulations on 100K!🎉

[@hddrecoveryservices]

:) Thanks dude!

[@kiramatzu]

dam from fix 3 broken pad to fix like 10 , i was like omg what a pulse lol

[@wonderman7885]

Hi Erkin, which device you used to clean up surface on memory chip (its a rubber or some metal stick ?)

[@hddrecoveryservices]

fiberglass scratch pen

[@ItalianRetroGuy]

I don't even know why these things have pads considering they probably don't really need them for manufacturing.

[@hddrecoveryservices]

good question. maybe they feel sorry for data recovery guys and wanted to make our lives a little easier :)

[@carlospizarro9322]

What kind of paper do you use to clean flux? I guess you use isopropyl alcohol, but I'm not sure about the paper.

[@hddrecoveryservices]

IPA and kimtech wipes

[@eddraper]

Why not just use solder to bridge those small gaps?

[@Djplanche]

The Best Doctor . 👍

[@ShirazHazrat]

Super impressive as always!

[@hddrecoveryservices]

Thanks again!

[@danielgrevan]

Did you scratch It because you guessed the traces could be corroded by water damage?

[@hddrecoveryservices]

Practical experience

[@puzzlemagnet1957]

I can see you as a main surgeon , when the humans will be humanoids.

[@mayurghogare1850]

You are great Man , one day I want to learn from you I will come to meet you

[@zeevcomp]

thank you so much for your videos i really learn so much from you you won't even believe:-) i set up my lab to to start shoot videos like you (just in hebrew) and i hope it's gonna be high quality like yours

[@Astinsan]

Oddly enough.. keeping stuff under water till it gets to you will help with corrosion

[@hddrecoveryservices]

True

[@madadventures3407]

Damnn!! Hats off to you

[@hddrecoveryservices]

thank you!

[@anvar7635]

Is this possible to recover all data after formatting my card from Sony alpha ILCE-7M3 ?

[@hddrecoveryservices]

Anvar, we don't do much work on phones

[@msha2443]

sir please tell me if i use 2.5 hdd in desktop what will happen (in place of 3.5 hdd) thankyou

[@hddrecoveryservices]

You can run 2.5" in desktop

[@DiskTuna]

What's the purple card reader?

[@hddrecoveryservices]

Just a generic multi card reader that I use with USB stabilizer

[@DiskTuna]

@@hddrecoveryservices Ah okay. It's my experience USB Stabilizer often has problems with multi card readers. Serge from DeepSpar confirmed this and recommends using dedicated reader, so for SD use reader that only reads SD etc.

[@creativechandu1182]

Sir one day is was moving data from my mobile internal storage to my dvd and I successfully moved. And the next day I inserted disc to check the files suddenly their is no data in the dvd but the storage is showing and I formated the disc and luckily some of them are stored in recycle bin and I restored from them to my 4gb memory card. Next day I insert the memory card to my pc to check the files but the removable disc partion doesn't showing I tried in another mobile and pc but I can't find it please recover my data please🙏🙏🙏🙏🙏🙏🙏🙏🙏

[@tavros314]

great video! thanks for sharing the experience

[@hddrecoveryservices]

Glad you enjoyed it!

[@andrewmcallister7781]

How do you remove the solder resist?

[@hddrecoveryservices]

What's solder resist?

[@andrewmcallister7781]

@@hddrecoveryservices The black layer which covers the copper traces/tracks

[@nehadhowlader7331]

Brother make a video about micro SD card fomet.. I have 4 micro sD cards.it's support in pc,phn but i can't see space available and want formet.By my phone also by my pc I did formet but I can't formet some problem i face pls make a video.althoughby cmd I'm also try but not workable It's showing unable to formet

[@hddrecoveryservices]

Actually just did make a video in format. It will be published tomorrow

[@nehadhowlader7331]

Thanks a lot brother hope tomorrow video will help me 😊😊❤❤❤

[@varmint243davev7]

nicely done sir !

[@hddrecoveryservices]

Thank you kindly!

[@lakmalsiriwardhana]

How do clear sd card. What tool u used?

[@hddrecoveryservices]

You mean secure erase?

[@lakmalsiriwardhana]

@@hddrecoveryservices yap

[@lakmalsiriwardhana]

@@hddrecoveryservices and where i can find usb hub u used for plug usb drives. Its contains voltage meter. What is it brand name?

[@abcdefghi6998]

Отличная работа👍

[@hddrecoveryservices]

Спасибо

[@DesignerMix]

If you never try you never learn, mistake is ok if you don't close eye on them *i tell it to viewers like me XD

[@CrudeOYL007]

Did you every answer email?

[@hddrecoveryservices]

emails don't go to me

[@djimavicair2drone]

Price

[@hddrecoveryservices]

Price is based on the type of work needed

[@ig33ku]

Hmmm love the vids

[@hddrecoveryservices]

Thanks

[@jgvinz4697]

I want format my brain 🙃

[@ssstudiostudio9446]

Sir sony camera 7me me format ho giya oh nikal sakda 9855492029

[@mfrfilm4760]

Hi how to contact u guys

[@hddrecoveryservices]

www.hddrecovery.ca/contact-us

[@eddraper]

Why not just use solder to bridge those small gaps?