Water Level Sensor & Industrial Relay - My First PLC Project #4

24V Relay: amzn.to/3zVtiqB
Water Level Sensor: amzn.to/3SVOl4T
_____________
Hi, I'm Hamed, I just graduated in Electronics & Electrical Engineering. I'm now working as a PLC Control Engineer.
My GitHub: github.com/hadefuwa
My website: www.hamed.engineer
If you have any questions you can email me at [e-mail] or just comment below.
Stuff You May Have Seen In My Videos
Oscilloscope £220: amzn.to/30AmFst
Elegoo Arduino Most Complete Kit £50: amzn.to/3qFHsoU
Elegoo Arduino Basic Kit £15: amzn.to/3qLipRK
Soldering Iron Station £30: amzn.to/3qHRWEm
Handheld Oscilloscope £50: amzn.to/3l76yMx
DIY Function Generator £9.99: amzn.to/30ynTEr
Lavolta Power Supply £60: amzn.to/3rHkFue
Eventek Power Supply £60: amzn.to/30DCrCO
You Can Also Find The Above For Cheaper On Banggood/Aliexpress

[@JeffMaigemu]

You are getting better at this. Big up to you

[@HamedAdefuwa]

Thanks bro, kinda hit a wall with it right now, need to buy a different PLC as this one can't take any I/O expansion cards

[@user-sf4ds2se1s]

can you please share the full wiring diagram as i'm facing the same problem with energizing the 24 VDC relay, the sensor output is 24 VDC but when i connect this output to the relay coil ... the voltage drop down to 9 VDC, i'll appreciate your help