How to create a convincing fire effect on stage using only water mist and lights. This is a companion video to "The Prop Effects Guidebook." Check out the book at www.propeffects...
Пікірлер: 72
@kimberlysanders9204 жыл бұрын
OMG this is the best DIY video ever!!!!!!! My family and I run a haunted house/spook house every Halloween. I have been searching for a safe way to have a burning witch screen for a VERY long time. I can't wait to try this! Thank you for the info!!!!!
@EarthRyno6 жыл бұрын
Awesome breakdown, Eric! I used this effect for a show earlier this year! The actor had to create the fire on stage with a clay pot and logs. I placed metal paint can, with holes in the side, in a slightly larger Tupperware container with water, and then placed that into the clay pot. Ultra sonic pond foggers were placed in the water and halogen lights were placed in the paint can. The heat from the lights drew the fog into the can and made it rise quickly. I used yellow and orange gels (you're right about red haha) on the lights to give it that nice fire look. The only drawback was that the show was in a lab theatre, and the scene became very quiet. You could actually hear the foggers making splash sounds. I don't think the audience connected the dots though. :P
@spacecaptain91882 ай бұрын
This is the best description i've seen. Thank you!
@blocxa_35415 жыл бұрын
I like your ending pun!!!😂😂💙
@EyeballsStudio6 жыл бұрын
Looks great! I think it would look even more realistic if the lights flickered a bit, easily done with LED lights and an Arduino. Anyway, I'm looking forward to your new book.
@georgiaisprocrastinating53726 жыл бұрын
Eyeballs Studio I think the problem with that is this is made for theatre so LED lights wouldn't really show with stage lights
@EricHartProps6 жыл бұрын
We've done this effect with a few LED strips that could have a bit of a flicker pattern programmed into them, so that did give a more realistic effect.
@erickrobson8865 жыл бұрын
Eric Hart what u mean?
@DJUniMekaju Жыл бұрын
I'd love to use this for an art project. Thank you! 💜
@ricardoscholz2 жыл бұрын
Hi again! I'll leave here some "lessons learned" from my experience with this effect in an opera. The idea was to replicate Eric's proposal, but we had to make some changes on the way. Our setup used 8 umidifiers (G.tech Allergy Free Hm 3L), a vertical fan and a PAR 64 LED, with a Kinect or mobile phone attached to the performer to controll intensity through a software. Fire was comming from a hole in the theatre stage floor, and all fire equipment was placed bellow the stage floor. On our first prototype, the 6mm holes in the tube allowed water to condense and block vapor after a while. We widened them to 8mm, but just got more time untill the problem happens again. So we decided to use individual flexible 1" rubber hoses (one for each umidifier), pointing up directly. Also, condensed water was comming back to the umidifiers through the hoses, so if hoses had curves in "U" shape, water would accumulate in the bottom untill the hose was obstructed and then mist would pass in "pulses". Solution was making sure the hoses would let the reflux go straight back to the umidifiers. The interactive effect of flames rising and falling was best achieved by changing fan speed, instead of light intensity. The downside is that changing fan speed has a natural delay, due to the time taken to the fan engine to speed up and to the wind to move, while light intensity changes are instantaneous. Also, we used a light flickering effect, varying light intensity around a center point, to try to give the fire a "candle" effect, but this must be used very carefully, as too wide variations may look or feel weird. Finally, the fan proved to be essencial. When we tested without a fan, the water mist tended to spread close to the floor. If you guys want to see the results, ask for making-off pictures and/or explanations, or use the algorithm we used to make the fire interactive and/or flickering, go to ricardoscholz.com/en/a-compadecida . Thanks to Eric Hart for the video explaining the original idea!
@FOXBATIC5 жыл бұрын
When I saw such decorative fireplace, I understood how to do it. And my idea was very similar to yours. I don't understand why they are so expensive if they are made from cheap tech. Prices can easily achive $ thousands.
@jonathanz.96753 жыл бұрын
I was thinking the same thing
@vincentchen14805 жыл бұрын
this is actually very amazing.
@PearBlossomPress5 жыл бұрын
Wow, that's awesome! Thanks for sharing!!!
@5spec Жыл бұрын
I believe they used to do this with blue light for prop spaceships back in the day
@joshuamann21714 жыл бұрын
What kind of humidifiers are those? Every one I find does not have the same fog output as yours.
@ricardoscholz4 жыл бұрын
Thanx for sharing. It's awesome! I can't wait for my book to arrive! I'm planning to make one of this and simulate flame level by controlling light's intensity with DMX dimmers, according to the movement of the performer, read by a mobile phone attached to his jacket in an internal pocket. Do you think that changing the intensity of light will give the impression of flames raising and lowering down?
@SafetyLucas2 жыл бұрын
Commercial foggers and hazers don't emit toxic chemicals. Also, ultrasonic foggers actually work better with tap water instead of distilled or deionized water.
@jediknight1292 жыл бұрын
de0ends on what fluid is used the glycol can be nasty shit.
@SafetyLucas2 жыл бұрын
@@jediknight129 Ethylene glycol is toxic. That's what antifreeze is. So obviously they wouldn't use that in a fog machine. They use propylene glycol, which is totally safe and nontoxic. They're both glycols, but one is poisonous and the other is totally harmless.
@jediknight1292 жыл бұрын
@@SafetyLucas propylene glycol isn't totally harmless dude check.the MSDS sheet for a start. Secondly given that the bottle.of fog fluid for my comercial flame effect machine sat about 10ft from me right now openly states it contains EG you'd be wrong there. Plus of.course not all.of this stuff is Water/glycol based. The Mineral Oil based stuff tlcan be REALLY nasty. plus of course heating glycol even pharmacological grade VG can and does cause permanent lung.damage at high exposure along with skin and throat irritation. it's not particularly something you want to run long term and there's a reason that crews are mandated to wear PPE around it. that's even before you get into things like the scenting agents used for effects work get added and the whole issue that 1-5m of exposure during a viewing of a play or a wander through a haunted house/a rollercoaster is one thing and working around it for a 12hr shift or a week to a month's worth of.the play is annother. Teschke, Kay & Chow, Yat & Netten, Chris & Varughese, Sunil & Kennedy, Susan & Brauer, Michael. (2005). Exposures to Atmospheric Effects in the Entertainment Industry. Journal of occupational and environmental hygiene. 2. 277-84. 10.1080/15459620590952215. is one decent start for the discussion of the health risks. www.google.com/url?sa=t&source=web&rct=j&url=www.cdc.gov/niosh/hhe/reports/pdfs/1990-0355-2449.pdf&ved=2ahUKEwiHjKzkl5_2AhWPilwKHbcYAP0QFnoECB0QAQ&usg=AOvVaw0o6-xKnHo7Yz7koyRTWnSO that is annother that references the fact that running a glycol based fog machine can cause the production of formaldehyde and a few other things that are OK in small quantities but built up exposure over time is nasty. the glycol machines are safe for.the most part but there's a lot of.stuff.you have to take.into.account for large scale use and long term exposure. if you can do the effect without using glycol or mineral oils it's better to do so and you do need to make people aware of the things they'll be exposed to. as for deionised or filtered water in a fogger iv never bothered unless I'm in a hard water area and that's only because I hate cleaning limescale off equipment. (obviously know what's in your water source and be sensible.)
@Cloudipy2 жыл бұрын
This so amazing my face was like 😲😲😲😲 the whole time
@justfelicia66716 жыл бұрын
where did you put the fan, exactly? you said it was above the fire to pull it up. it is hard to picture, can you explain. also, would you reconsider republishing so we can see it?
@lexiasomething26494 жыл бұрын
Yes,i was wondering the same where exactly to put the box fan?on the ceiling orr?? Thanks much
@BenjaminEagan5 жыл бұрын
Hey Eric, that fire looks amazing. Well done! I've been tinkering with a similar project and really trying to miniaturize the mist/ light unit as much as possible for a tabletop version. It seems you just need air volume for a good mist though. Any suggestions making this as tiny as possible?
@Midnight_Immortal5 жыл бұрын
Im not Eric but try a diffuser they come with lights and they put out mist in smaller amounts
@BenjaminEagan5 жыл бұрын
@@Midnight_Immortal thanks, I did try talking one of those apart to try to change the airflow pattern of the mist. Then I bought a fish pond mister which worked a bit better, but still not perfect.
@tjsudac2 жыл бұрын
The effect looks really great. And I really like the idea of using the pipe in order to lower the source of the mist because I plan to use something similar in faux fireplace where the installation needs to be as low as possible. But I have one concern: does mist condensate into water inside the pipe before reaching the exit, and if does, how did you solve it? Thanks!
@ricardoscholz2 жыл бұрын
Hi. On my experience, yes, mist condensated into the pipe, and also in the tube holes, blocking mist after a while. I solved the problem using a pipe for each umidifier (single individual mist exits) and avoiding "U" shape paths in the flexible rubber hoses, so water went back to the umidifier instead of accumulating in the bottom of the "U". I made a comment in the main thread with more details. Good luck.
@usedgifs59273 жыл бұрын
AMAZING
@Hisinger8296 жыл бұрын
Great effect, I hope to use it for an upcoming project. What is the brand of humidifier used in the video?
@EricHartProps6 жыл бұрын
These are the Safety 1st Ultrasonic 360 Degree Cool Mist Humidifier.
@nekote9735 Жыл бұрын
I want to figure out how to make a tiny version of this to strap onto my hands and legs for a cosplay
@reubanvasu84172 жыл бұрын
Love the dad joke at the end..)))
@theultimatetowerofterrorre3013 жыл бұрын
Any thoughts if a fan can be placed BELOW the water mist distribution PVC to blow the mist upward? I need an effect in which equipment needs to be hidden below, but not above the misting PVC pipe. Thanks!
@ricochetcabaret3952 жыл бұрын
I was wondering the same thing. I guess I can experiment with it and see, myself.
@ricardoscholz2 жыл бұрын
I used a fan below the mist distribution, blowing upward. It wouldn't work for me without it. However, I abandoned the PVC pipe with holes, as mist condensed and blocked the holes after a while. I used individual 1" flexible hoses (one for each umidifier), pointing their exit upward. I made a comment with more details in the main thread.
@noone.52965 жыл бұрын
Great I love it!
@twiggydrowe82485 жыл бұрын
safety 1st humidifiers, but wht modle?
@mariag384 жыл бұрын
Woooooooooow
@briankuhnert4294 жыл бұрын
Could a similar approach be taken to create a effect of mist coming off of a lake (using more blue lights)? I’m actually needing to create the illusion of light reflecting off of a lake.
@reneehelene682 ай бұрын
Do these work well outside?
@chanceromero14456 жыл бұрын
What If I need to put this one a costume, on a face so it looks like a face and a body is burning??? No Dice ?
@EricHartProps6 жыл бұрын
I haven't tried it, but it may be tricky since the humidifier needs to remain fairly level and steady. The water will slosh around a lot if it was in a costume. But again, I haven't tried it, so you may be able to solve that challenge.
@GhostRider-pu3eu6 жыл бұрын
Ive been working on this over time. They make spill proof rechargable mist makers now. Some tubing, and aquarium pump to blow the fog through, and some bright LED lights make a cool effect ;)
@nikkubler6 жыл бұрын
Ghost Rider I’ve been looking into doing a similar thing for a costume. Any pointers on which pump and misters yield the best results? Judging by your name we may be using this method for similar costumes.
@tacmonkey4 жыл бұрын
"..toxic chemicals found in theatrical fog and haze." What would those be?
@Khazaddumband5 жыл бұрын
How long will a tank last minutes wise? Sould these go for 45 minutes or possibly an hour. My band wants to use this as a staging effect.
@FOXBATIC5 жыл бұрын
typical humidifier can last all night long
@leonhardt6016 Жыл бұрын
Hello, may i have a question? Can we replace the humidifier with dry ice for short-lasting fire? I am actually need to set the whole stage on fire :'')
@burntcoppery Жыл бұрын
you should be able to - theatrical haze (less toxic and easier to breathe through than dry ice) can be piped reasonably easily. I've tested the above effect just using a basic home humidifier and a pipe with holes drilled in it. The only problem is it takes longer to build up enough to light and longer to dissipate than steam - you'll have to get the fans at full blast.
@revbgmiii3 жыл бұрын
The holes on the pipe, howbig was urs and how far apart
@gabrielmoreno96302 жыл бұрын
Do you have to prime and glue pvc? Or does it not matter since its smoke and not water?
@ricardoscholz2 жыл бұрын
Worked for me with no glue. Just put the PVC together, and didn't have leaking issues. Then, I abandoned PVC and used flexible rubber hoses.
@mfigueroa79736 жыл бұрын
What type of led lights did you use and also what watts
@EricHartProps6 жыл бұрын
The lights in the video were incandescent PAR16 bulbs, so not actually LEDs.
@Kareemdinho105 жыл бұрын
@@EricHartProps Do you believe incandescent to be the best stage option, or will LED work well also?
@jobi26293 жыл бұрын
whata the name or brand of the humidifier you used
@Kareemdinho105 жыл бұрын
@Eric Hart do you believe I could set up a Stage Smoke/Fog machine instead of the Humidificators... (I can add fans also)
@erickrobson8865 жыл бұрын
interesting, can you show me? (photo or video) Cheers
@Kareemdinho105 жыл бұрын
@@erickrobson886Sorry Did not take photos. My experiment did not work as expected, because I used two small misters; but it will work if you use a $50 high power mister or the ones for $90 . It will take less height space as compared to the tall humidifier , which is what I aimed at.
@RonWylie-gk5lc4 жыл бұрын
You can buy a ready made and ultra realistic fire already made but they are a few hundred bucks, but where is the fun in that lol I have a bought Metal bsket that is now fitted with fire led bulbs and the effect is great, behind that I have a cheap 23 flat tv with dvd player built in with one of those log fire DVDs, it looks fantastic AND has the wonderful crackling sound, very relaxing. I want to add smoke with a cheap pond fog maker but Im stuff trying to keep the water vapor away from the TV
@lost2wolves5924 жыл бұрын
Do you think it could be possible to install in a costume?
@ricardoscholz2 жыл бұрын
You would need to adapt a lot of things. Sounds to be a good challenge.
@Sebastian__.2 жыл бұрын
fog and haze fluid is not as dangerous now adays.
@josejohnperayil6 жыл бұрын
What is the urgency of creating such Maya effects....
@anthonyfx22556 жыл бұрын
What brand is the humidifiers.
@EricHartProps6 жыл бұрын
These are the Safety 1st Ultrasonic 360 Degree Cool Mist Humidifier.
@anthonyfx22556 жыл бұрын
Eric Hart thank you
@73N5H1 Жыл бұрын
Really? Didn't make the obvious joke and call it a humidifire? Lol
@Diamondsofmayhem5 жыл бұрын
Well, you ruined it with that lame pun at the end, otherwise, I definitely want to try this.